Date: Tue, 17 May 2005 06:42:23 -0400 (EDT) From: "Ilmar S. Habibulin" <ilmar@watson.org> To: Marius Strobl <marius@alchemy.franken.de> Cc: freebsd-sparc64@freebsd.org Subject: Re: Blade 100 tester wanted Message-ID: <20050517063527.E57532@fledge.watson.org> In-Reply-To: <20050517120913.A56571@newtrinity.zeist.de> References: <20050514155422.A33783@newtrinity.zeist.de> <Pine.GSO.4.62.0505152204131.29807@brakkenstein.nijmegen.internl.net> <20050517120913.A56571@newtrinity.zeist.de>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Tue, 17 May 2005, Marius Strobl wrote: > This turned out to be a bug in Xorg. A patch for the xorg-server > port is at: > http://alchemy.franken.de/~marius/xorg-server.diff > and a package built with that patch at: > http://alchemy.franken.de/~marius/xorg-server-6.8.2_2.tbz Well, i just want to confirm, that everything is working as expected. I hadn't time to check fonts loading into graphic console and keymap shift, but even if it is not working your effort is great. dmesg is attached, if you'll have interest in it. [-- Attachment #2 --] GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-20050515-SNAP #0: Sun May 15 12:52:31 UTC 2005 root@sunblade2:/usr/src/sys/sparc64/compile/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "tick" frequency 502000000 Hz quality 1000 real memory = 134217728 (128 MB) avail memory = 115703808 (110 MB) cpu0: Sun Microsystems UltraSparc-IIe Processor (502.00 MHz CPU) nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre (US-IIe) compatible, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff pci0: <OFW PCI bus> on pcib0 ebus0: <PCI-EBus3 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 12.0 on pci0 ebus0: <idprom>: incomplete ebus0: <flashprom> addr 0-0xfffff (no driver attached) eeprom0: <EEPROM/clock> addr 0x100000000-0x100001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 83081c37 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0x400000-0x41ffff at device 12.1 on pci0 miibus0: <MII bus> on gem0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: 2kB RX FIFO, 2kB TX FIFO gem0: Ethernet address: 00:03:ba:08:1c:37 gem0: if_start running deferred for Giant gem0: [GIANT-LOCKED] fwohci0: <1394 Open Host Controller Interface> mem 0x420000-0x4207ff,0x422000-0x4227ff at device 12.2 on pci0 fwohci0: Could not allocate irq device_attach: fwohci0 attach returned 6 ohci0: <Sun PCIO-2 USB controller> mem 0x2000000-0x2007fff at device 12.3 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <Sun PCIO-2 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pci0: <old, non-VGA display device> at device 3.0 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) atapci0: <AcerLabs M5229 UDMA66 controller> port 0xa00-0xa07,0xa18-0xa1b,0xa10-0xa17,0xa08-0xa0b,0xa20-0xa2f at device 13.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 pcib1: <OFW PCI-PCI bridge> at device 5.0 on pci0 pci1: <OFW PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x107f mem 0x3000000-0x300007f at device 2.0 on pci1 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:df:23:60:e2 machfb0: <ATI Rage XL> port 0xb00-0xbff mem 0x4000000-0x4ffffff,0x426000-0x426fff at device 19.0 on pci0 machfb0: console machfb0: 16 MB aperture at 0xca554000, 1 KB registers at 0x047ffc00 machfb0: 8188 KB SDRAM 114.765 MHz, maximum RAMDAC clock 230 MHz, DSP machfb0: resolution 1152x900 at 8 bpp syscons0: <System console> on nexus0 syscons0: Unknown <16 virtual consoles, flags=0x300> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0 uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0 ukbd0: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 2, iclass 3/1 kbd0 at ukbd0 Timecounters tick every 1.000 msec ad0: 19092MB <Seagate ST320011A 3.10> at ata2-master UDMA66 acd0: CDRW <LTN486S/YSU1> at ata2-slave PIO4 Trying to mount root from ufs:/dev/ad0a Invalid time in real time clock. Check and reset the date immediately! ums0: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 3, iclass 3/1 ums0: 3 buttons.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050517063527.E57532>