Date: Sun, 17 Jul 2005 22:37:06 +0530 From: Subhro <subhro.kar@gmail.com> To: Jonathan Weiss <jw@innerewut.de> Cc: FreeBSD-Stable <freebsd-stable@freebsd.org> Subject: Re: RELENG_6 has problems with booting Message-ID: <42DA903A.90102@gmail.com> In-Reply-To: <BF0057C0.2C29A%jw@innerewut.de> References: <BF0057C0.2C29A%jw@innerewut.de>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------040301060700030809000809 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 7/17/2005 22:15, Jonathan Weiss wrote: >Cheers, > > >Yesterday I updated my 5-STABLE system to RELENG_6 through cvsup&make. >My machine will only boot in safe mode. Verbose or normal boot will result >in a hang that occuers normally during local package startup or filesystem >scan. > >I get no panic or LOR, the machine just completely hangs. > >I used the GENERIC kernel with these points added: >--------------------------------------------------- ># PF >device pf >device pflog >device pfsync > ># ALTQ >options ALTQ >options ALTQ_CBQ # Class Bases Queueing >options ALTQ_RED # Random Early Drop >options ALTQ_RIO # RED In/Out >options ALTQ_HFSC # Hierarchical Packet Scheduler >options ALTQ_CDNR # Traffic conditioner >options ALTQ_PRIQ # Priority Queueing >options ALTQ_NOPCC # Required for SMP build >options ALTQ_DEBUG > ># Sound >device sound >device "snd_via82c686" > >#atapicam >device atapicam > ># GBDE >options GEOM_BDE > >options COMPAT_FREEBSD5 >--------------------------------------------------- > >I also tried a kernel with `options SMP` commented out but it still hangs. > >The dmesg: >--------------------------------------------------- >Copyright (c) 1992-2005 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 6.0-BETA1 #2: Sat Jul 16 23:22:20 CEST 2005 > root@satan.nodomain:/usr/obj/usr/src/sys/XXX >WARNING: WITNESS option enabled, expect reduced performance. >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 > >Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, >CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> >real memory = 536805376 (511 MB) >avail memory = 515989504 (492 MB) >npx0: [FAST] >npx0: <math processor> on motherboard >npx0: INT 16 interface >cpu0 on motherboard >pcib0: <Host to PCI bridge> pcibus 0 on motherboard >pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard >pci0: <PCI bus> on pcib0 >$PIR: No matching entry for 0.1.INTA >$PIR: No matching entry for 0.2.INTA >$PIR: No matching entry for 0.2.INTB >$PIR: No matching entry for 0.2.INTC >$PIR: No matching entry for 0.4.INTA >$PIR: No matching entry for 0.6.INTA >agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device >0.0 on pci0 >pci0: <memory, RAM> at device 0.1 (no driver attached) >pci0: <memory, RAM> at device 0.2 (no driver attached) >pci0: <memory, RAM> at device 0.3 (no driver attached) >pci0: <memory, RAM> at device 0.4 (no driver attached) >pci0: <memory, RAM> at device 0.5 (no driver attached) >isab0: <PCI-ISA bridge> at device 1.0 on pci0 >isa0: <ISA bus> on isab0 >pci0: <serial bus, SMBus> at device 1.1 (no driver attached) >ohci0: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq 12 at >device 2.0 on pci0 >ohci0: [GIANT-LOCKED] >usb0: OHCI version 1.0, legacy support >usb0: <OHCI (generic) USB controller> on ohci0 >usb0: USB revision 1.0 >uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 3 ports with 3 removable, self powered >ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 11 at >device 2.1 on pci0 >ohci1: [GIANT-LOCKED] >usb1: OHCI version 1.0, legacy support >usb1: <OHCI (generic) USB controller> on ohci1 >usb1: USB revision 1.0 >uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 3 ports with 3 removable, self powered >ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 5 >at device 2.2 on pci0 >ehci0: [GIANT-LOCKED] >usb2: EHCI version 1.0 >usb2: companion controllers, 4 ports each: usb0 usb1 >usb2: <EHCI (generic) USB 2.0 controller> on ehci0 >usb2: USB revision 2.0 >uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >uhub2: 6 ports with 6 removable, self powered >ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1 >ulpt0: using bi-directional mode >nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem >0xe0000000-0xe0000fff irq 11 at device 4.0 on pci0 >nve0: Ethernet address 00:0c:6e:57:5a:25 >miibus0: <MII bus> on nve0 >rlphy0: <RTL8201L 10/100 media interface> on miibus0 >rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >nve0: Ethernet address: 00:0c:6e:57:5a:25 >nve0: [GIANT-LOCKED] >pci0: <multimedia, audio> at device 6.0 (no driver attached) >pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 >pci1: <PCI bus> on pcib1 >ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at device >8.0 on pci1 >ed0: [GIANT-LOCKED] >ed0: Ethernet address: 00:a0:d2:14:f5:33 >ed0: if_start running deferred for Giant >ed0: type NE2000 (16 bit) >dc0: <Davicom DM9102A 10/100BaseTX> port 0xc400-0xc4ff mem >0xdf000000-0xdf0000ff irq 12 at device 10.0 on pci1 >miibus1: <MII bus> on dc0 >ukphy0: <Generic IEEE 802.3u media interface> on miibus1 >ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >dc0: Ethernet address: 00:80:ad:04:c6:78 >dc0: if_start running deferred for Giant >dc0: [GIANT-LOCKED] >atapci0: <nVidia nForce2 UDMA133 controller> port >0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0 >ata0: <ATA channel 0> on atapci0 >ata1: <ATA channel 1> on atapci0 >pcib2: <PCI-PCI bridge> at device 30.0 on pci0 >pci2: <PCI bus> on pcib2 >$PIR: ROUTE_INTERRUPT failed. >pci2: <display, VGA> at device 0.0 (no driver attached) >pmtimer0 on isa0 >orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcd7ff on isa0 >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on >isa0 >fdc0: [FAST] >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >ppc0: FIFO with 16/16/16 bytes threshold >ppbus0: <Parallel port bus> on ppc0 >plip0: <PLIP network interface> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 16550A >sio1 at port 0x2f8-0x2ff irq 3 on isa0 >sio1: type 16550A >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >unknown: <PNP0303> can't assign resources (port) >unknown: <PNP0c01> can't assign resources (memory) >unknown: <PNP0501> can't assign resources (port) >unknown: <PNP0700> can't assign resources (port) >unknown: <PNP0401> can't assign resources (port) >unknown: <PNP0501> can't assign resources (port) >Timecounter "TSC" frequency 1830013124 Hz quality 800 >Timecounters tick every 1.000 msec >ad0: 76319MB <WDC WD800JB-00FSA0 77.07W77> at ata0-master PIO4 >ad1: 190782MB <WDC WD2000BB-14GUA0 08.02D08> at ata0-slave PIO4 >acd0: CDRW <LITE-ON LTR-12101B/LS3B> at ata1-master PIO4 >acd1: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-slave PIO4 >ATA PseudoRAID loaded >Trying to mount root from ufs:/dev/ad0s1a >cd0 at ata1 bus 0 target 0 lun 0 >cd0: <LITE-ON LTR-12101B LS3B> Removable CD-ROM SCSI-0 device >cd0: 16.000MB/s transfers >cd0: Attempt to query device size failed: NOT READY, Medium not present - >tray closed >cd1 at ata1 bus 0 target 1 lun 0 >cd1: <TOSHIBA DVD-ROM SD-M1712 1004> Removable CD-ROM SCSI-0 device >cd1: 16.000MB/s transfers >cd1: Attempt to query device size failed: NOT READY, Medium not present >dc0: failed to force tx and rx to idle state >dc0: failed to force tx and rx to idle state >dc0: failed to force tx and rx to idle state >dc0: failed to force tx and rx to idle state >WARNING: attempt to net_add_domain(netgraph) after domainfinalize() >WARNING: /private was not properly dismounted >ad1: FAILURE - out of memory in start > > > >-- >Jonathan Weiss >http://blog.innerewut.de > > >_______________________________________________ >freebsd-stable@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-stable >To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > > > What happens if you drop ATAPICAM and do you have a good reason why you are including GEOM_BDE? Thanks S. --------------040301060700030809000809--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42DA903A.90102>