Date: Wed, 14 Jan 2004 15:00:49 +0300 From: Vladimir Grebenschikov <vova@fbsd.ru> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/61358: boot freezez while ATA GEOM slice detection on latest -CURRENT Message-ID: <E1AgjhZ-0000E7-6R@vbook.fbsd.ru> Resent-Message-ID: <200401141200.i0EC0ROW057049@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 61358
>Category: kern
>Synopsis: boot freezez while ATA GEOM slice detection on latest -CURRENT
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jan 14 04:00:27 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: Vladimir Grebenschikov
>Release: FreeBSD 5.2-CURRENT i386
>Organization:
SWsoft
>Environment:
System:
FreeBSD 5.2-CURRENT #21: Wed Jan 14 09:07:27 MSK 2004 root@walder:/ext/obj/ext/current/src/sys/VBOOK
>Description:
boot freezez while ATA GEOM slice detection:
OK boot -v
...
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc21e6360
ad0: <TOSHIBA MK4019GAX/FA002D> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:00 typ:6 s(CHS):0/1/1 e(CHS):969/239/63 s:63 l:14666337
[1] f:00 typ:160 s(CHS):970/0/1 e(CHS):996/239/63 s:14666400 l:408240
[2] f:80 typ:165 s(CHS):997/0/1 e(CHS):1023/239/63 s:15074640 l:41942880
[3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/239/63 s:57017520 l:21122640
GEOM: Configure ad0s1, start 32256 length 7509164544 end 7509196799
GEOM: Configure ad0s2, start 7509196800 length 209018880 end 7718215679
GEOM: Configure ad0s3, start 7718215680 length 21474754560 end 29192970239
GEOM: Configure ad0s4, start 29192970240 length 10814791680 end 40007761919
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s3c, start 0 length 21474754560 end 21474754559
GEOM: Configure ad0s3e, start 402653184 length 6442450944 end 6845104127
GEOM: Configure ad0s3f, start 6845104128 length 14629650432 end 21474754559
GEOM: Configure ad0s4c, start 0 length 10814791680 end 10814791679
GEOM: Configure ad0s4e, start 0 length 134217728 end 134217727
GEOM: Configure ad0s4f, start 134217728 length 8915517440 end 9049735167
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: resetting done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: resetting done ..
<<<freeze here>>>
Stopped at siointr1+0xec: jmp siointr1+0x220
db> tr
siointr1(c2189000,cb2ebc20,c0619fec,c,c21a3580) at siointr1+0xec
siointr(c2189000,1,c04d8704,4,c0fbb540) at siointr+0x88
intr_execute_handlers(c067e290,cb2ebc74,c0fbdc60,c0fbadc0,4) at
intr_execute_handlers+0x88
atpic_handle_intr(4) at atpic_handle_intr+0xef
Xatpic_intr4() at Xatpic_intr4+0x1e
--- interrupt, eip = 0xc046bf95, esp = 0xcb2ebcb8, ebp = 0xcb2ebcb8 ---
acpi_cpu_c1(1,1,0,3e8,0) at acpi_cpu_c1+0x5
acpi_cpu_idle(cb2ebd14,c04d7a35,28002965,74697865,3b280029) at
acpi_cpu_idle+0xd5
cpu_idle(28002965,74697865,3b280029,6c280029,c0fbadc0) at cpu_idle+0x1f
idle_proc(0,cb2ebd48,66692800,62280029,636e6172) at idle_proc+0x25
fork_exit(c04d7a10,0,cb2ebd48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcb2ebd7c, ebp = 0 ---
db> tr 0
sched_switch(c0686380,c8440b06,7ba34f99,c06a7094,c0686380) at
sched_switch+0xd5
mi_switch(c0686380,44,c5e0c928,c8,c21d5d34) at mi_switch+0x19b
cv_wait(c21d5d58,c21d5d34,c8,c0643e03,c21d5d00) at cv_wait+0x19c
_sema_wait(c21d5d34,0,0,c063cb89,c21d5d00) at _sema_wait+0x6f
ata_queue_request(c21d5d00,c065ea40,1,c0488e13,c21e6300) at
ata_queue_request+0x1e7
ata_getparam(c21458d8,ec,c2145800,c0821d60,c04758df) at ata_getparam+0x98
ata_identify_devices(c2145800,1,c0fa29a0,c0674970,c0821d80) at
ata_identify_devices+0x29
ata_boot_attach(0,0,c0821d80,c04f5b86,0) at ata_boot_attach+0x2f
run_interrupt_driven_config_hooks(0,81e000,81ec00,81e000,0) at
run_interrupt_driven_config_hooks+0x2b
mi_startup() at mi_startup+0xb5
begin() at begin+0x2c
db> ps
pid proc uarea uid ppid pgrp flag stat wmesg wchan cmd
39 c21626e0 cbb6b000 0 0 0 0000204 [IWAIT] swi0: tty:sio
9 c2162898 cbb6c000 0 0 0 0000204 [CV]cbb cv 0xc2146360] cbb0
38 c2162a50 cbb6d000 0 0 0 0000204 [SLP]usbtsk 0xc07abda0]
usbtask
37 c2162c08 cbb92000 0 0 0 0000204 [SLP]usbevt 0xc2149210]
usb0
36 c2162dc0 cbb93000 0 0 0 0000204 [SLP]tzpoll 0xc0683344]
acpi_thermal
8 c2165000 cbb94000 0 0 0 0000204 [SLP]actask 0xc068336c]
acpi_task2
7 c20ef528 cbb2e000 0 0 0 0000204 [SLP]actask 0xc068336c]
acpi_task1
6 c20ef6e0 cbb2f000 0 0 0 0000204 [SLP]actask 0xc068336c]
acpi_task0
5 c20ef898 cbb30000 0 0 0 0000204 [SLP]tqthr 0xc068c9e8]
taskqueue
35 c20efa50 cbb31000 0 0 0 0000204 new [IWAIT] swi6:+
34 c20efc08 cbb32000 0 0 0 0000204 [CV]ATA request done
0xc21e7e58] swi7: task queue
33 c20efdc0 cbb33000 0 0 0 0000204 new [IWAIT] swi3: cambio
32 c20fe000 cbb34000 0 0 0 0000204 new [IWAIT] swi2: camnet
31 c20fe1b8 cbb59000 0 0 0 0000204 [IWAIT] swi7: acpitaskq
30 c20fe370 cbb5a000 0 0 0 0000204 new [IWAIT] swi5:+
29 c20fe528 cbb5b000 0 0 0 0000204 [SLP]- 0xc0683560] random
4 c20fe6e0 cbb5c000 0 0 0 0000204 [SLP]- 0xc06860c0] g_down
3 c20fe898 cbb5d000 0 0 0 0000204 [SLP]- 0xc06860bc] g_up
2 c0fc11b8 cb32e000 0 0 0 0000204 [SLP]- 0xc06860b4] g_event
28 c0fc1370 cb32f000 0 0 0 0000204 new [IWAIT] swi1: net
27 c0fc1528 cb330000 0 0 0 0000204 new [IWAIT] swi4: vm
26 c0fc16e0 cb331000 0 0 0 000020c [CV]ATA request done
0xc2224358] swi8: tty:sio cloc
k
25 c0fc1898 cb356000 0 0 0 0000204 [IWAIT] irq15: ata1
24 c0fc1a50 cb357000 0 0 0 0000204 [IWAIT] irq14: ata0
23 c0fc1c08 cb358000 0 0 0 0000204 new [IWAIT] irq13:
22 c0fc1dc0 cb359000 0 0 0 0000204 new [IWAIT] irq12: psm0
21 c20ef000 cbb2b000 0 0 0 0000204 new [IWAIT] irq11:
20 c20ef1b8 cbb2c000 0 0 0 0000204 new [IWAIT] irq10: sio1
19 c20ef370 cbb2d000 0 0 0 0000204 [IWAIT] irq9: cbb0 uhci0+++
18 c0fba000 cb2dc000 0 0 0 0000204 new [IWAIT] irq8: rtc
17 c0fba1b8 cb325000 0 0 0 0000204 new [IWAIT] irq7:
16 c0fba370 cb326000 0 0 0 0000204 new [IWAIT] irq6:
15 c0fba528 cb327000 0 0 0 0000204 new [IWAIT] irq5:
14 c0fba6e0 cb328000 0 0 0 0000204 new [IWAIT] irq4: sio0
13 c0fba898 cb329000 0 0 0 0000204 new [IWAIT] irq3:
12 c0fbaa50 cb32a000 0 0 0 0000204 [IWAIT] irq1: atkbd0
11 c0fbac08 cb32b000 0 0 0 0000204 new [IWAIT] irq0: clk
10 c0fbadc0 cb32c000 0 0 0 000020c [CPU 0] idle
1 c0fc1000 cb32d000 0 0 0 0000200 new [INACTIVE] swapper
0 c06861c0 c081f000 0 0 0 0000200 [CV]ATA request done
0xc21d5d58] swapper
db> tr 26
sched_switch(c0fc22a0,a6c82403,dbfd3b1d,c06a7094,c0fc22a0) at
sched_switch+0xd5
mi_switch(c0fc22a0,24,c04e2398,c2224334,c2224334) at mi_switch+0x19b
cv_wait(c2224358,c2224334,c8,c2224300,c2224300) at cv_wait+0x19c
_sema_wait(c2224334,0,0,c063cb89,c2224300) at _sema_wait+0x6f
ata_queue_request(c2224300,c050fe20,cb33abac,a,cb33abec) at
ata_queue_request+0x1e7
ata_getparam(c21458d8,ec,0,cb33ac00,c04749e8) at ata_getparam+0x98
ata_identify_devices(c2145800,ffffffff,c063c9e5,0,c21e7e00) at
ata_identify_devices+0x29
ata_reinit(c2145800,c047a8de,c2166380,cb33ac34,c0513fb6) at ata_reinit+0x208
ata_completed(c21e7e00,0,cb33ac8c,c047878e,c21e7e00) at ata_completed+0x1e
ata_finish(c21e7e00,200,c0fc16e0,cb33ac6c,c0503b95) at ata_finish+0x26
ata_interrupt(c2145800,c0fc178c,cb33ace8,c04f58fb,c0fc22a0) at
ata_interrupt+0xcbe
ata_timeout(c21e7e00,43adc,6,4c8ae003,c0476a80) at ata_timeout+0x1b4
softclock(0,0,662e6d6b,70,c0fc16e0) at softclock+0x25e
ithread_loop(c0fac600,cb33ad48,45c1c,7000a94,45d1c) at ithread_loop+0x1d8
fork_exit(c04d8850,c0fac600,cb33ad48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcb33ad7c, ebp = 0 ---
db> tr 34
sched_switch(c0fbc2a0,e3792983,74cabf12,c06a7094,c0fbc2a0) at
sched_switch+0xd5
mi_switch(c0fbc2a0,40,c04e2398,c21e7e34,c21e7e34) at mi_switch+0x19b
cv_wait(c21e7e58,c21e7e34,c8,c21e7e00,c21e7e00) at cv_wait+0x19c
_sema_wait(c21e7e34,0,0,c063cb89,c21e7e00) at _sema_wait+0x6f
ata_queue_request(c21e7e00,c050fe20,cb309c2c,a,cb309c6c) at
ata_queue_request+0x1e7
ata_getparam(c21458d8,ec,c21d5d80,cb309c80,c04749e8) at ata_getparam+0x98
ata_identify_devices(c2145800,ffffffff,c063c9e5,0,c21d5d00) at
ata_identify_devices+0x29
ata_reinit(c2145800,c20ff000,cb309ccc,28a9c2,c20efcb4) at ata_reinit+0x208
ata_completed(c21d5d00,1,e5190428,0,c211ac5c) at ata_completed+0x1e
taskqueue_run(c211ac40,cb309d14,c04d8a28,0,2) at taskqueue_run+0xcd
taskqueue_swi_run(0,2,25a39f1e,0,c20efc08) at taskqueue_swi_run+0x13
ithread_loop(c0fadc80,cb309d48,3ead6b5c,0,3ead6b5c) at ithread_loop+0x1d8
fork_exit(c04d8850,c0fadc80,cb309d48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
>How-To-Repeat:
Boot latest -CURRENT on Sony VAIO z505S
There is full boot -v on latest kernel and on december kernel (all ok)
bad kernel:
OK boot -v
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000e7800 len=0000000000018800
SMAP type=01 base=0000000000100000 len=000000000bef0000
SMAP type=03 base=000000000bff0000 len=000000000000f800
SMAP type=04 base=000000000bfff800 len=0000000000000800
SMAP type=02 base=00000000fffe7800 len=0000000000018800
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #21: Wed Jan 14 09:07:27 MSK 2004
root@walder.asplinux.ru:/ext/obj/ext/current/src/sys/VBOOK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f4000.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc07f4200.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc07f42ac.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc07f4358.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc07f4400.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07f44ac.
Preloaded elf module "/boot/kernel/snd_neomagic.ko" at 0xc07f4558.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc07f460c.
Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07f46b4.
Preloaded elf module "/boot/kernel/ulpt.ko" at 0xc07f4760.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc07f480c.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc07f48b4.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc07f4960.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc07f4a0c.
Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc07f4ab8.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc07f4b64.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc07f4c0c.
Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc07f4cb8.
Calibrating clock(s) ... i8254 clock: 1193117 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 331580711 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000bc67fff, 189014016 bytes (46146 pages)
avail memory = 191545344 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c50
bios32: Entry = 0xfd7c0 (c00fd7c0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7c0+0x214
pnpbios: Found PnP BIOS data at 0xc00f6c80
pnpbios: Entry = f0000:b5d4 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
acpi0: <SONY Z0> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b54
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 9
embedded 0 1 B 0x61 9
embedded 0 1 C 0x62 9
embedded 0 1 D 0x63 9
embedded 0 7 D 0x63 9
embedded 0 8 A 0x60 9
embedded 0 8 B 0x61 9
embedded 0 9 A 0x62 9
embedded 0 10 A 0x61 9
embedded 0 11 A 0x60 9
embedded 0 6 A 0x60 9
AcpiOsDerivePciId: bus 0 dev 7 func 2
AcpiOsDerivePciId: bus 0 dev 10 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 16777212, width = 16777210
ACPI timer looks BAD min = 3, max = 16777212, width = 16777209
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks BAD min = 3, max = 7, width = 4
ACPI timer looks BAD min = 2, max = 9, width = 7
ACPI timer looks BAD min = 2, max = 9, width = 7
ACPI timer looks BAD min = 3, max = 9, width = 6
ACPI timer looks BAD min = 2, max = 9, width = 7
ACPI timer looks BAD min = 0, max = 16777215, width = 16777215
ACPI timer looks BAD min = 2, max = 8, width = 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\_SB_.LNKC irq 9: [ 9] low,level,sharable 0.9.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\_SB_.LNKC irq 9: [ 9] low,level,sharable 0.9.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 26, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fedef000, size 12, enabled
map[14]: type 4, range 32, base 0000fcc0, size 6, enabled
map[18]: type 1, range 32, base fec00000, size 20, enabled
pcib0: matched entry for 0.6.INTA (source \_SB_.LNKA)
pcib0: slot 6 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fc90, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fca0, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fe400000, size 22, enabled
map[18]: type 1, range 32, base feb00000, size 20, enabled
pcib0: matched entry for 0.8.INTA (source \_SB_.LNKA)
pcib0: slot 8 INTA is routed to irq 9
found-> vendor=0x10c8, dev=0x0005, revid=0x20
bus=0, slot=8, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base fe000000, size 22, enabled
map[14]: type 1, range 32, base fea00000, size 20, enabled
pcib0: matched entry for 0.8.INTB (source \_SB_.LNKB)
pcib0: slot 8 INTB is routed to irq 9
found-> vendor=0x10c8, dev=0x8005, revid=0x20
bus=0, slot=8, func=1
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base fedeec00, size 9, enabled
pcib0: matched entry for 0.9.INTA (source \_SB_.LNKC)
pcib0: slot 9 INTA is routed to irq 9
found-> vendor=0x104d, dev=0x8009, revid=0x01
bus=0, slot=9, func=0
class=0c-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
found-> vendor=0x1180, dev=0x0475, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fedf0000, size 16, enabled
map[14]: type 4, range 32, base 0000fc88, size 3, enabled
pcib0: matched entry for 0.11.INTA (source \_SB_.LNKA)
pcib0: slot 11 INTA is routed to irq 9
found-> vendor=0x127a, dev=0x2005, revid=0x01
bus=0, slot=11, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D3
pci0: <network, ethernet> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums1: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1
ums1: 3 buttons
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <display, VGA> at device 8.0 (no driver attached)
pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0
pcm0: buftop is 0x0027ec00
pcm0: buftop is changed to 0x0027ec00
pcm0: <Asahi Kasei AK4542 AC97 Codec (id = 0x414b4d01)>
pcm0: Codec features headphone, 5 bit master volume, AKM 3D Audio
pcm0: rec buf 0xcbe12c00
pcm0: play buf 0xcbe0ec00
pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.10.INTA (source \_SB_.LNKB)
pcib0: slot 10 INTA is routed to irq 9
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04751180 0x02100007 0x06070000 0x00022000
0x10: 0x20000000 0x020000dc 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109
0x40: 0x8053104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001
0xe0: 0x24c04100 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <simple comms> at device 11.0 (no driver attached)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 53 02 14
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x401 0x1 0x1
sio1 port 0x140-0x147,0x3e8-0x3ef irq 10 drq 0 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
ed0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 331580711 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
DUMMYNET initialized (011031)
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc21e6360
ad0: <TOSHIBA MK4019GAX/FA002D> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:00 typ:6 s(CHS):0/1/1 e(CHS):969/239/63 s:63 l:14666337
[1] f:00 typ:160 s(CHS):970/0/1 e(CHS):996/239/63 s:14666400 l:408240
[2] f:80 typ:165 s(CHS):997/0/1 e(CHS):1023/239/63 s:15074640 l:41942880
[3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/239/63 s:57017520 l:21122640
GEOM: Configure ad0s1, start 32256 length 7509164544 end 7509196799
GEOM: Configure ad0s2, start 7509196800 length 209018880 end 7718215679
GEOM: Configure ad0s3, start 7718215680 length 21474754560 end 29192970239
GEOM: Configure ad0s4, start 29192970240 length 10814791680 end 40007761919
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s3c, start 0 length 21474754560 end 21474754559
GEOM: Configure ad0s3e, start 402653184 length 6442450944 end 6845104127
GEOM: Configure ad0s3f, start 6845104128 length 14629650432 end 21474754559
GEOM: Configure ad0s4c, start 0 length 10814791680 end 10814791679
GEOM: Configure ad0s4e, start 0 length 134217728 end 134217727
GEOM: Configure ad0s4f, start 134217728 length 8915517440 end 9049735167
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: resetting done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: resetting done ..
<<<freeze here>>>
=====================================================================================
December kernel (all ok):
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #28: Fri Dec 19 14:38:13 MSK 2003
root@walder.asplinux.ru:/ext/obj/ext/current/src/sys/VBOOK
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0790000.
Preloaded elf module "/boot/kernel.old/pccard.ko" at 0xc0790204.
Preloaded elf module "/boot/kernel.old/snd_neomagic.ko" at 0xc07902b4.
Preloaded elf module "/boot/kernel.old/snd_pcm.ko" at 0xc079036c.
Preloaded elf module "/boot/kernel.old/ukbd.ko" at 0xc079041c.
Preloaded elf module "/boot/kernel.old/usb.ko" at 0xc07904cc.
Preloaded elf module "/boot/kernel.old/ums.ko" at 0xc0790578.
Calibrating clock(s) ... i8254 clock: 1193121 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 331581106 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000bc69fff, 189022208 bytes (46148 pages)
avail memory = 189968384 (181 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c50
bios32: Entry = 0xfd7c0 (c00fd7c0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7c0+0x214
pnpbios: Found PnP BIOS data at 0xc00f6c80
pnpbios: Entry = f0000:b5d4 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
acpi0: <SONY Z0 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b54
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 9
embedded 0 1 B 0x61 9
embedded 0 1 C 0x62 9
embedded 0 1 D 0x63 9
embedded 0 7 D 0x63 9
embedded 0 8 A 0x60 9
embedded 0 8 B 0x61 9
embedded 0 9 A 0x62 9
embedded 0 10 A 0x61 9
embedded 0 11 A 0x60 9
embedded 0 6 A 0x60 9
AcpiOsDerivePciId: bus 0 dev 7 func 2
AcpiOsDerivePciId: bus 0 dev 10 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 3, max = 16777212, width = 16777209
ACPI timer looks BAD min = 3, max = 9, width = 6
ACPI timer looks BAD min = 2, max = 16777156, width = 16777154
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 3, max = 16777212, width = 16777209
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 8, width = 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\\_SB_.LNKC irq 9: [ 9] low,level,sharable 0.9.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\\_SB_.LNKC irq 9: [ 9] low,level,sharable 0.9.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 26, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fedef000, size 12, enabled
map[14]: type 4, range 32, base 0000fcc0, size 6, enabled
map[18]: type 1, range 32, base fec00000, size 20, enabled
pcib0: matched entry for 0.6.INTA (source \\_SB_.LNKA)
pcib0: slot 6 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fc90, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fca0, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fe400000, size 22, enabled
map[18]: type 1, range 32, base feb00000, size 20, enabled
pcib0: matched entry for 0.8.INTA (source \\_SB_.LNKA)
pcib0: slot 8 INTA is routed to irq 9
found-> vendor=0x10c8, dev=0x0005, revid=0x20
bus=0, slot=8, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base fe000000, size 22, enabled
map[14]: type 1, range 32, base fea00000, size 20, enabled
pcib0: matched entry for 0.8.INTB (source \\_SB_.LNKB)
pcib0: slot 8 INTB is routed to irq 9
found-> vendor=0x10c8, dev=0x8005, revid=0x20
bus=0, slot=8, func=1
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base fedeec00, size 9, enabled
pcib0: matched entry for 0.9.INTA (source \\_SB_.LNKC)
pcib0: slot 9 INTA is routed to irq 9
found-> vendor=0x104d, dev=0x8009, revid=0x01
bus=0, slot=9, func=0
class=0c-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
found-> vendor=0x1180, dev=0x0475, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fedf0000, size 16, enabled
map[14]: type 4, range 32, base 0000fc88, size 3, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.LNKA)
pcib0: slot 11 INTA is routed to irq 9
found-> vendor=0x127a, dev=0x2005, revid=0x01
bus=0, slot=11, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D3
pci0: <network, ethernet> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums1: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1
ums1: 3 buttons
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <display, VGA> at device 8.0 (no driver attached)
pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0
pcm0: buftop is 0x0027ec00
pcm0: buftop is changed to 0x0027ec00
pcm0: <Asahi Kasei AK4542 AC97 Codec (id = 0x414b4d01)>
pcm0: Codec features headphone, 5 bit master volume, AKM 3D Audio
pcm0: rec buf 0xcbf6fc00
pcm0: play buf 0xcbf6bc00
pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached)
pci0: <simple comms> at device 11.0 (no driver attached)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x401 0x1 0x1
sio1 port 0x140-0x147,0x3e8-0x3ef irq 10 drq 0 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ed0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 331581106 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
DUMMYNET initialized (011031)
lo0: bpf attached
ata1: spurious interrupt - status=0x50 error=0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc2363b60
ad0: <TOSHIBA MK4019GAX/FA002D> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:00 typ:6 s(CHS):0/1/1 e(CHS):969/239/63 s:63 l:14666337
[1] f:00 typ:160 s(CHS):970/0/1 e(CHS):996/239/63 s:14666400 l:408240
[2] f:80 typ:165 s(CHS):997/0/1 e(CHS):1023/239/63 s:15074640 l:41942880
[3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/239/63 s:57017520 l:21122640
GEOM: Configure ad0s1, start 32256 length 7509164544 end 7509196799
GEOM: Configure ad0s2, start 7509196800 length 209018880 end 7718215679
GEOM: Configure ad0s3, start 7718215680 length 21474754560 end 29192970239
GEOM: Configure ad0s4, start 29192970240 length 10814791680 end 40007761919
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s3c, start 0 length 21474754560 end 21474754559
GEOM: Configure ad0s3e, start 402653184 length 6442450944 end 6845104127
GEOM: Configure ad0s3f, start 6845104128 length 14629650432 end 21474754559
GEOM: Configure ad0s4c, start 0 length 10814791680 end 10814791679
GEOM: Configure ad0s4e, start 0 length 134217728 end 134217727
GEOM: Configure ad0s4f, start 134217728 length 8915517440 end 9049735167
ata1-master: pio=0x09 wdma=0xffffffff udma=0xffffffff cable=40pin
ata1-master: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
ata1-master: FAILURE setting PIO1 on Intel PIIX4 chip
ata1-master: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
ata1-master: FAILURE setting PIO1 on Intel PIIX4 chip
ad1: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
ad1: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
GEOM: create disk ad1 dp=0xc2363960
ad1: <MEMORYSTICK 4M 8K/SONY1.00> ATA-0 disk at ata1-master
ad1: 3MB (7904 sectors), 247 C, 2 H, 16 S, 512 B
ad1: 1 secs/int, 1 depth queue, BIOSPIO
GEOM: new disk ad1
[0] f:80 typ:1 s(CHS):0/1/12 e(CHS):245/1/16 s:27 l:7845
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 13824 length 4016640 end 4030463
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xfcc0-0xfcff mem 0xfec00000-0xfecfffff,0xfedef000-0xfedeffff irq 9 at device 6.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 08:00:46:04:31:b3
fxp0: PCI IDs: 8086 1229 104d 8057 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1AgjhZ-0000E7-6R>