From owner-freebsd-questions Thu Nov 30 06:54:00 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id GAA11018 for questions-outgoing; Thu, 30 Nov 1995 06:54:00 -0800 Received: from Gatekeeper.nbs.sk (Gatekeeper.nbs.sk [193.87.130.2]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id GAA10998 for ; Thu, 30 Nov 1995 06:53:50 -0800 Received: (from tis@localhost) by Gatekeeper.nbs.sk id PAA08343 (8.6.12/IDA-1.6 for ); Thu, 30 Nov 1995 15:54:58 +0100 Received: from chodovar.nbs.sk by (National Bank of Slovakia firewall gateway) via SMTP; Thu Nov 30 15:54:41 1995 Received: (from siman@localhost) by chodovar.nbs.sk (8.7.1/8.7.1) id PAA00234 for questions@freebsd.org; Thu, 30 Nov 1995 15:51:38 +0100 (MET) From: miro siman Message-Id: <199511301451.PAA00234@chodovar.nbs.sk> Subject: Problems with dump utility To: questions@freebsd.org Date: Thu, 30 Nov 1995 15:51:37 +0100 (MET) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-questions@freebsd.org Precedence: bulk Hello, I've got some problems during dumping ( with /sbin/dump ) my filesystems to SCSI 8mm tape drive. 1st, here is my HW/SW config: HW: HP Vectra N2 4/66 486 DX2 machine 32MB RAM AHA-1540CF/1542CF with BIOS v2.01 SCSI adapter 1 GB IBM DPES-31080 S31K SCSI disk EXABYTE EXB-8500SMBANXH1 0458 8mm SCSI tape drive WD SMC Ultra eth. card SW: FreeBSD 2.1.0-RELEASE When dumping filesystems to tape drive with: /sbin/dump 0ubdf 32 105000 /dev/nrst0 /dev/sd0s2g <-- /home OS hangs up with these err. messages on system console: aha0: MBO 02 and not 00 (free) sd0(aha0:0:0): timed out adapter not taking command.. frozen?! Debugger ("aha1540") called AGAIN and dump utility writing these error messages: DUMP: Date of this level 0 dump: date is here DUMP; .... DUMP: Dumping /dev/rsd0s2g (/home) to /dev/rst0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [ directories] DUMP: estimated xxxxxxx tape blocks on 0,xx tape(s) DUMP: dumping (Pass III) [directories] DUMP: read error from /dev/rsd0s2g: Input/output error: \ [sector 36592]: count=2048 After these messages i'm forced to use HW reset to reboot system. Any suggestions would be most appreciated Thanks, miro -- Miroslav Siman National Bank of Slovakia phone: ++42-7-513-3130 Zahradnicka 153, P.O. Box 27 fax: ++42-7-526-5968 820 09 Bratislava fax box:++42-7-513-6130 Slovak Republic Internet: siman@nbs.sk