Date: Sat, 22 Jan 2005 23:58:18 +0300 From: "Andrew L. Neporada" <andr@dgap.mipt.ru> To: freebsd-hackers@freebsd.org Subject: "configured irq .. is not in bitmap of probed irqs 0" -- what does it mean? Message-ID: <20050122205818.GA1411@nas.dgap.mipt.ru>
next in thread | raw e-mail | index | archive | help
--ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi! I am getting "configured irq .. is not in bitmap of probed irqs 0" error (warning?) while booting 4.10: ... sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 10 not in bitmap of probed irqs 0 sio2: irq maps: 0x1 0x1 0x1 0x1 sio2 at port 0x3e8-0x3ef irq 10 on isa0 sio2: type 16550A sio3: configured irq 11 not in bitmap of probed irqs 0 sio3: irq maps: 0x1 0x1 0x1 0x1 sio3 at port 0x2e8-0x2ef irq 11 on isa0 sio3: type 16550A ... The box in question has Vortex86-based ICOP-6047 3.5" mainboard with 4 serial ports (http://www.icop.com.tw/products_detail.asp?ProductID=125). COM3 & COM4 are configured in BIOS to use irq 10 and 11 respectively. Surprisingly, but it seems that both COM3 & COM4 ports work ok (getty works, there is no "silo overflow" errors). So, should I worry about this error? Andrew. P.S. Relevant lines from kernel config are: # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? port IO_COM3 irq 10 device sio3 at isa? port IO_COM4 irq 11 --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="vortex.dmesg" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE-p2 #2: Sat Jan 22 15:50:59 MSK 2005 root@xxx.xxx.ru:/var/obj/var/src/sys/ET204 Calibrating clock(s) ... TSC clock: 166598129 Hz, i8254 clock: 1193086 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 166612309 Hz CPU: Pentium (166.61-MHz 586-class CPU) Origin = "SiS SiS SiS " Id = 0x505 real memory = 125829120 (122880K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x004301000 - 0x0077f7fff, 55537664 bytes (13559 pages) avail memory = 52867072 (51628K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb30 bios32: Entry = 0xfdb40 (c00fdb40) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdb61 pnpbios: Found PnP BIOS data at 0xc00f75c0 pnpbios: Entry = f0000:672b Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc429e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc429e0a8. Preloaded mfs_root "/mfsroot" at 0xc429e0f8. md0: Preloaded image </mfsroot> 67108864 bytes at 0xc029cd50 Creating DISK md0 Creating DISK md1 md1: Malloc disk pci_open(1): mode 1 addr port (0x0cf8) is 0x80000844 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=05501039) Using $PIR table, 5 entries at 0xc00f7c00 pcib-: pcib0 exists, using next available unit number npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 112321689 bytes/sec bzero() bandwidth = 55775559 bytes/sec pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1039, dev=0x0550, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 23 found-> vendor=0x1039, dev=0x5513, revid=0xd0 class=01-01-80, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ff00, size 4 found-> vendor=0x1039, dev=0x0008, revid=0x00 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1039, dev=0x7001, revid=0x07 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[10]: type 1, range 32, base dfffb000, size 12 found-> vendor=0x1039, dev=0x0001, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=1 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000dc00, size 8 map[14]: type 1, range 32, base dfffaf00, size 8 pci0: <PCI bus> on pcib0 atapci0: <SiS 5591 ATA33 controller> port 0xff00-0xff0f at device 0.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 30 30 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff08 ata1: at 0x170 irq 15 on atapci0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <OHCI USB controller> (vendor=0x1039, dev=0x7001) at 1.2 irq 5 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0 found-> vendor=0x1039, dev=0x5315, revid=0x00 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[10]: type 1, range 32, base d0000000, size 27 map[14]: type 1, range 32, base dfee0000, size 17 map[18]: type 1, range 32, base 0000cc00, size 7 pci1: <PCI bus> on pcib2 pci1: <SiS model 5315 VGA-compatible display device> (vendor=0x1039, dev=0x5315) at 0.0 irq 0 rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfffaf00-0xdfffafff irq 9 at device 13.0 on pci0 rl0: Ethernet address: 44:4d:50:10:1e:c1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached pci-: pci1 exists, using next available unit number pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 pmtimer0 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 10 not in bitmap of probed irqs 0 sio2: irq maps: 0x1 0x1 0x1 0x1 sio2 at port 0x3e8-0x3ef irq 10 on isa0 sio2: type 16550A sio3: configured irq 11 not in bitmap of probed irqs 0 sio3: irq maps: 0x1 0x1 0x1 0x1 sio3 at port 0x2e8-0x2ef irq 11 on isa0 sio3: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:03d00320 0..976=977 cylinders, 0..3=4 heads, 1..32=32 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default bpf: lo0 attached DUMMYNET initialized (011031) bpf: sl0 attached bpf: sl1 attached bpf: sl2 attached bpf: sl3 attached ad0: success setting PIO4 on generic chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <AFAYA MDM 064M/1.1> ATA-0 disk at ata0-master ad0: 61MB (125184 sectors), 978 C, 4 H, 32 S, 512 B ad0: 1 secs/int, 1 depth queue, PIO4 ad0: piomode=4 dmamode=-1 udmamode=-1 cblid=0 Mounting root from ufs:/dev/md0c md0: invalid primary partition table: no magic start_init: trying /sbin/init ad0s1: type 0xa5, start 32, end = 125183, size 125152 : OK ad0s1: type 0xa5, start 32, end = 125183, size 125152 : OK --ReaqsoxgOBHFXBhH--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050122205818.GA1411>