From owner-freebsd-questions@FreeBSD.ORG Mon Oct 11 13:18:00 2004 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6A26316A4CE; Mon, 11 Oct 2004 13:18:00 +0000 (GMT) Received: from mx3.mra.co.id (mx3.mra.co.id [202.138.254.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5E37F43D4C; Mon, 11 Oct 2004 13:17:51 +0000 (GMT) (envelope-from reza@mra.co.id) Received: from localhost (localhost.mra.co.id [127.0.0.1]) by mx3.mra.co.id (Postfix) with ESMTP id 992672E06D; Mon, 11 Oct 2004 20:11:51 +0700 (WIT) Received: from mx3.mra.co.id ([127.0.0.1]) by localhost (mx3.mra.co.id [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 45404-04; Mon, 11 Oct 2004 20:11:51 +0700 (WIT) Received: from mailbox.mra.co.id (unknown [172.16.0.225]) by mx3.mra.co.id (Postfix) with ESMTP id 29FF72E05E; Mon, 11 Oct 2004 20:11:51 +0700 (WIT) Received: from mra.co.id (unknown [172.16.0.228]) by mailbox.mra.co.id (Postfix) with ESMTP id 3482120F; Mon, 11 Oct 2004 20:04:21 +0700 (WIT) Message-ID: <4169BDDC.20500@mra.co.id> Date: Mon, 11 Oct 2004 05:55:24 +0700 From: Muhammad Reza User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031208 X-Accept-Language: en-us, en MIME-Version: 1.0 To: grog@freebsd.org References: <41669A62.9040700@mra.co.id> <200410092122.25811.Emanuel.Strobl@gmx.net> In-Reply-To: <200410092122.25811.Emanuel.Strobl@gmx.net> X-Virus-Scanned: by amavisd-new at mra.co.id Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 cc: freebsd-questions@freebsd.org Subject: Re: RAID 1 in HP NetServer LC 2000 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 11 Oct 2004 13:18:00 -0000 Ok.. vinum then.. but i have error when applied this vinum.conf drive drive1 device /dev/da0s1e drive drive2 device /dev/da1s1e volume usr setupstate plex org concat sd length 13887091s drive drive1 plex org concat sd length 13887091s drive drive2 volume var setupstate plex org concat sd length 0 drive drive1 plex org concat sd length 0 drive drive2 mail# vinum vinum -> create -f /etc/vinum.conf 2: drive drive2 device /dev/da1s1e /*** 2 : Invalid argument*/ 1 drives: D drive1 State: up Device /dev/da0s1e Avail: 0/16488 MB (0%) D drive2 State: referenced Device /dev/da1s1e Avail: 0/0 MB 2 volumes: V usr State: up Plexes: 2 Size: 6780 MB V var State: up Plexes: 2 Size: 9707 MB 4 plexes: P usr.p0 C State: up Subdisks: 1 Size: 6780 MB P usr.p1 C State: up Subdisks: 1 Size: 6780 MB P var.p0 C State: up Subdisks: 1 Size: 9707 MB P var.p1 C State: up Subdisks: 1 Size: 0 B 4 subdisks: S usr.p0.s0 State: up PO: 0 B Size: 6780 MB S usr.p1.s0 State: up PO: 0 B Size: 6780 MB S var.p0.s0 State: up PO: 0 B Size: 9707 MB S var.p1.s0 State: up PO: 0 B Size: 0 B which argumen is invalid ? i use 4.10 .. please help me... regards reza >Am Freitag, 8. Oktober 2004 15:47 schrieb Muhammad Reza: > > >>Dear All, >>Howto setup RAID 1 in HP NetServer LC 2000 ? I have 2 Seagate HDD that >>want to be mirror 1:1, >>Can i do that from Symbios software or tool from my FreeBSD 4.10 ? >> >> > >With 4.10 you have the choice of vinum and ccd, in 5.3 you also have gmirror >for RAID1. See the man pages for details, ccd is quiet easy, vinum is a bit >more complex but more flexible too. > >-Harry > > > >>regards >>reza >>---snip--- >>sym0: <896> port 0x2000-0x20ff mem >>0xfd000000-0xfd001fff,0xfd002000-0xfd0023ff irq 11 at device 6.0 on pci3 >>sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking >>sym0: open drain IRQ line driver, using on-chip SRAM >>sym0: using LOAD/STORE-based firmware. >>sym0: handling phase mismatch from SCRIPTS. >>sym1: <896> port 0x2400-0x24ff mem >>0xfd004000-0xfd005fff,0xfd002400-0xfd0027ff irq 5 at device 6.1 on pci3 >>sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking >>sym1: open drain IRQ line driver, using on-chip SRAM >>sym1: using LOAD/STORE-based firmware. >>sym1: handling phase mismatch from SCRIPTS. >>---snap--- >>.. >>.. >>--snip-- >>da0 at sym1 bus 0 target 0 lun 0 >>da0: Fixed Direct Access SCSI-3 device >>da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing >>Enabled >>da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) >>da1 at sym1 bus 0 target 1 lun 0 >>da1: Fixed Direct Access SCSI-3 device >>da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing >>Enabled >>da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) >>---snap--- >> >> >> >> >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to >>"freebsd-questions-unsubscribe@freebsd.org >> >" > >