Date: Sun, 23 Nov 2014 21:33:33 +0100 From: Rainer Hurling <rhurlin@gwdg.de> To: <freebsd-ports@freebsd.org> Subject: Re: [audio/pulseaudio] no sound after update from 0.9.23 to 5.0 Message-ID: <5472449D.6040208@gwdg.de> In-Reply-To: <54704E93.6090706@gwdg.de> References: <54704E93.6090706@gwdg.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Am 22.11.2014 um 09:51 schrieb Rainer Hurling: > Together with the big gnome3 update also audio/pulseaudio was updated. > Unfortunately, after that update, I have no sound anymore. Before, with > PulseAudio 0.9.23, sound was excellent. > > Because I am using an ASUS mainboard 'M4A88TD-V EVO-USB3' and a NVIDIA > GeForce GTX 750Ti with a recent HEAD (amd64), my sound devices are like > this: > > #cat /dev/sndstat > FreeBSD Audio Driver (64bit 2009061500/amd64) > Installed devices: > pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> on hdaa0 kld snd_hda (1p:1v/0r:0v) > pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> on hdaa0 kld snd_hda (1p:6v/0r:0v) > pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> on hdaa0 kld snd_hda (1p:1v/0r:0v) > pcm3: <Realtek ALC892 (Analog 7.1+HP/2.0)> on hdaa1 kld snd_hda > (1p:6v/1r:2v) default > pcm4: <Realtek ALC892 (Rear Digital)> on hdaa1 kld snd_hda (1p:1v/0r:0v) > pcm5: <Realtek ALC892 (Onboard Digital)> on hdaa1 kld snd_hda (1p:1v/0r:0v) > pcm6: <Realtek ALC892 (Front Analog Mic)> on hdaa1 kld snd_hda (0p:0v/1r:1v) > > Because my surround sound system is found on pcm3, I have to change the > default device to /dev/dsp3 for a 5.1 system. I successfully use these > settings for years now: > > # /etc/sysctl.conf: > hw.snd.compat_linux_mmap=1 > hw.snd.default_unit=3 > hw.snd.verbose=1 > dev.pcm.3.play.vchanformat=s16le:5.1 > dev.pcm.3.play.vchans=6 > dev.pcm.3.eq_preamp=+4 > hw.snd.latency=10 > > # /boot/device.hints: > # Change 'black' und 'grey' > # green: front nid 20 as 1 seq 0 > # black: rear nid 21 as 1 seq 2 > # orange: subwoofer nid 22 as 1 seq 1 > # grey: sides nid 23 as 1 seq 4 > hint.hdac.1.cad0.nid21.config="as=1 seq=4 device=Line-Out color=Grey" > hint.hdac.1.cad0.nid23.config="as=1 seq=2 device=Line-Out color=Black" > hint.hdac.1.cad0.nid27.config="as=1 seq=15 device=Headphones color=Green" > hint.pcm.3.vol=80 > hint.pcm.3.eq=1 > hint.pcm.3.vpc=1 > > > The four main PulseAudio configuration files at /usr/local/etc/pulse are > changed as following: > > diff daemon.conf.sample daemon.conf > 79c79 > < ; default-sample-channels = 2 > --- >> default-sample-channels = 6 > 80a81 >> default-channel-map = > front-left,front-center,front-right,rear-right,rear-left,lfe > 82c83 > < ; default-fragments = 4 > --- >> default-fragments = 8 > > > #diff default.pa.sample default.pa > 47c47 > < #load-module module-oss device="/dev/dsp" sink_name=output > source_name=input > --- >> load-module module-oss device="/dev/dsp3" sink_name=output > source_name=input > 61c61 > < load-module module-jackdbus-detect channels=2 > --- >> load-module module-jackdbus-detect channels=6 > > > #diff client.conf.sample client.conf > 22,23c22,23 > < ; default-sink = > < ; default-source = > --- >> default-sink = output >> default-source = input > 27c27 > < ; autospawn = yes > --- >> autospawn = no > 31c31 > < ; cookie-file = > --- >> cookie-file = .config/pulse/cookie > > > #diff system.pa.sample system.pa > 52c52 > < load-module module-suspend-on-idle > --- >> #load-module module-suspend-on-idle > > > When I try to start PulseAudio, it breaks like that: > > # pulseaudio --start > W: [(null)] caps.c: Normally all extra capabilites would be dropped now, > but that's impossible because PulseAudio was build without capabilities > support. > E: [(null)] main.c: Start des Daemons fehlgeschlagen. > > # pulseaudio > W: [(null)] caps.c: Normally all extra capabilities would be dropped > now, but that's impossible because PulseAudio was built without > capabilities support. > W: [(null)] pid.c: Stale PID file, overwriting. > W: [(null)] module-oss.c: mmap(PROT_READ) failed, reverting to non-mmap > mode: Invalid argument > W: [(null)] oss-util.c: '/dev/dsp0' doesn't support full duplex > W: [(null)] module-oss.c: mmap(PROT_WRITE) failed, reverting to non-mmap > mode: Invalid argument > W: [(null)] oss-util.c: '/dev/dsp1' doesn't support full duplex > W: [(null)] module-oss.c: mmap(PROT_WRITE) failed, reverting to non-mmap > mode: Invalid argument > W: [(null)] oss-util.c: '/dev/dsp1' doesn't support full duplex > W: [(null)] module-oss.c: mmap(PROT_WRITE) failed, reverting to non-mmap > mode: Invalid argument > W: [(null)] oss-util.c: '/dev/dsp6' doesn't support full duplex > W: [(null)] module-oss.c: mmap(PROT_READ) failed, reverting to non-mmap > mode: Invalid argument > E: [oss] module-oss.c: pa_read() failed: Resource temporarily unavailable > E: [(null)] source.c: Assertion 'source_set_state(s, PA_SOURCE_IDLE) == > 0' failed at pulsecore/source.c:612, function void > pa_source_put(pa_source *)(). Aborting. > Abbruch > > > A more detailed report, generated by 'pulseaudio --log-level=4 -vvvv', > is attached as a file. In this log, there is a hint about a key problem. > I have no idea, if this is of any importance in this context: > > [..snip..] > D: [(null)] module-device-restore.c: Database contains invalid data for > key: source:output.monitor (probably pre-v1.0 data) > D: [(null)] module-device-restore.c: Attempting to load legacy > (pre-v1.0) data for key: source:output.monitor > D: [(null)] module-device-restore.c: Size does not match. > D: [(null)] module-device-restore.c: Unable to load legacy (pre-v1.0) > data for key: source:output.monitor. Ignoring. > D: [(null)] module-device-restore.c: Database contains invalid data for > key: source:output.monitor:null > [..snip..] > > > I hope, there is some knowledge on the list to overcome these problems > with PulseAudio. As I said, before the update it works like a charm for > years on my boxes. > > Any help is really appreciated. An please let me know, if I should > provide more information. Thanks in advance. By trial and error I found, that PulseAudio only stops with an error, when 'default-sample-channels' in /usr/local/etc/pulse/daemon.conf is changed: default-sample-channels = 2 # works default-sample-channels = 6 # crashes With more than 2 channels it breaks with this message: E: [oss] module-oss.c: pa_read() failed: Resource temporarily unavailable E: [(null)] source.c: Assertion 'source_set_state(s, PA_SOURCE_IDLE) == 0' failed at pulsecore/source.c:612, function void pa_source_put(pa_source *)(). Aborting. I assume, this is not intended? At least, in 0.9.23 it works. > > Greetings, > Rainer Hurling
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5472449D.6040208>