Date: Thu, 12 May 2005 13:08:32 -0500 From: "Conrad J. Sabatier" <conrads@cox.net> To: Christian Brueffer <chris@unixpages.org> Cc: =?ISO-8859-1?Q?S=F8ren?= Schmidt <sos@DeepCore.dk> Subject: Re: cvs commit: src/sys/dev/ata ata-queue.c Message-ID: <20050512130832.4e0922e9@dolphin.local.net> In-Reply-To: <20050512074839.GB1074@unixpages.org> References: <200505111436.j4BEaQWP077515@repoman.freebsd.org> <20050511145558.7e030a62@dolphin.local.net> <42828A49.8000008@DeepCore.dk> <20050512070844.GA1074@unixpages.org> <428301A4.5050100@DeepCore.dk> <20050512074839.GB1074@unixpages.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Thu, 12 May 2005 09:48:39 +0200, Christian Brueffer <chris@unixpages.org> wrote: > On Thu, May 12, 2005 at 09:11:32AM +0200, S�ren Schmidt wrote: > > Christian Brueffer wrote: > > > > >>Hmm, get me the exact config fx the dmesg from it boot verbosely > > >on a >working kernel, I need to be abel to reproduce to fix > > >this... > > > >Here are verbose bootups from an IBM T41p: > > > > > >http://people.freebsd.org/~brueffer/verbose-boot.ok > > >http://people.freebsd.org/~brueffer/verbose-boot.fail > > > > Loose atapicam and let me know if that changes anything.. > > > > Works fine now, thanks! > > - Christian I'm still not quite there yet. The ata1-master device is still not working, ata1-slave is still being configured as acd0, but the boot at least proceeds now. Verbose dmesg.boot attached. -- Conrad J. Sabatier <conrads@cox.net> -- "In Unix veritas" [-- Attachment #2 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Thu May 12 12:06:24 CDT 2005 conrads@dolphin.local.net:/usr/obj/usr/src/sys/CUSTOM WARNING: debug.mpsafenet forced to 0 as aio requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff805ef000. Calibrating clock(s) ... i8254 clock: 1193197 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995009297 Hz CPU: AMD Athlon(tm) 64 Processor 3200+ (1995.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 536608768 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x00000000006ec000 - 0x000000001f089fff, 513400832 bytes (125342 pages) avail memory = 510185472 (486 MB) mem: <memory> null: <null device, zero device> nfslock: pseudo-device random: <entropy source, Software, Yarrow> io: <I/O> cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80015004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de) pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x10de, dev=0x00d1, revid=0xa4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x10de, dev=0x00d0, revid=0xf6 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d4, revid=0xa4 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00005000, size 6, enabled map[24]: type 4, range 32, base 00005040, size 6, enabled found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfb000, size 12, enabled found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfc000, size 12, enabled found-> vendor=0x10de, dev=0x00d8, revid=0xa2 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfdc00, size 8, enabled found-> vendor=0x10de, dev=0x00d5, revid=0xa5 bus=0, slot=8, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x10de, dev=0x00dd, revid=0xa2 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d2, revid=0xa4 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0:1:1: Transition from D0 to D3 pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0:2:0: Transition from D0 to D3 pci0: <serial bus, USB> at device 2.1 (no driver attached) pci0:2:1: Transition from D0 to D3 pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0:2:2: Transition from D0 to D3 atapci0: <nVidia nForce3 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pcib1: <PCI-PCI bridge> at device 10.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfe600000-0xfeafffff pcib1: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib1 pci2: physical bus=2 found-> vendor=0x1274, dev=0x1371, revid=0x08 bus=2, slot=3, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=3 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000ee80, size 6, enabled pcib1: (null) requested I/O range 0xee80-0xeebf: in range found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=2, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feafe000, size 12, enabled pcib1: (null) requested memory range 0xfeafe000-0xfeafefff: good map[14]: type 4, range 32, base 0000ef00, size 6, enabled pcib1: (null) requested I/O range 0xef00-0xef3f: in range map[18]: type 1, range 32, base fe900000, size 20, enabled pcib1: (null) requested memory range 0xfe900000-0xfe9fffff: good found-> vendor=0x11c1, dev=0x048c, revid=0x03 bus=2, slot=5, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base feaff400, size 8, enabled pcib1: (null) requested memory range 0xfeaff400-0xfeaff4ff: good map[14]: type 4, range 32, base 0000eff0, size 3, enabled pcib1: (null) requested I/O range 0xeff0-0xeff7: in range map[18]: type 4, range 32, base 0000e800, size 8, enabled pcib1: (null) requested I/O range 0xe800-0xe8ff: in range pcm0: <AudioPCI ES1373-8> port 0xee80-0xeebf irq 3 at device 3.0 on pci2 pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xee80 pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features AMAP pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 7f1000, 1000; 0xffffff00007f1000 -> 7f1000 pcm0: sndbuf_setmap 7ef000, 1000; 0xffffff00007ef000 -> 7ef000 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xef00-0xef3f mem 0xfeafe000-0xfeafefff,0xfe900000-0xfe9fffff irq 5 at device 4.0 on pci2 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafe000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:90:27:65:67:c9 fxp0: [GIANT-LOCKED] pci2: <simple comms> at device 5.0 (no driver attached) pci2:5:0: Transition from D0 to D3 pcib2: <PCI-PCI bridge> at device 11.0 on pci0 pcib2: secondary bus 1 pcib2: subordinate bus 1 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfc500000-0xfe5fffff pcib2: prefetched decode 0xdc400000-0xec3fffff pci1: <PCI bus> on pcib2 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0322, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib2: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 3, range 32, base e0000000, size 27, enabled pcib2: (null) requested memory range 0xe0000000-0xe7ffffff: good pci1: <display, VGA> at device 0.0 (no driver attached) pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 fdc0: ic_type 90 part_id 80 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered linprocfs registered Timecounter "TSC" frequency 1995009297 Hz quality 800 Timecounters tick every 1.000 msec splash: image decoder found: star_saver Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on nVidia nForce3 chip ad0: setting UDMA100 on nVidia nForce3 chip ad0: 190782MB <Seagate ST3200822A 3.01> at ata0-master UDMA100 ad0: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire unknown: timeout waiting for read DRQGEOM: new disk ad0 ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=88 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: reinit done .. acd0: setting PIO4 on nVidia nForce3 chip acd0: setting UDMA33 on nVidia nForce3 chip acd0: <ASUS CD-S480/AH/0.87> CDROM drive at ata1 as slave acd0: read 8250KB/s (8250KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 65535 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 65535
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050512130832.4e0922e9>