Date: Fri, 15 Jul 2005 21:17:49 +0500 From: Katu <boynagar@gmail.com> To: freebsd-scsi@freebsd.org Subject: ahc problem - 6.0-SNAP004 fails to boot Message-ID: <f0d84caa05071509177fe86f32@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi all,
I asked this question on -current a while ago, and they recommended
asking here. So here is the problem: I have an old HP Kayak XU
(2xPentium II 300 Mhz) that was happily running Windows NT 4.0, then
SuSE Linux 9.0 with kernel 2.4.21, then FreeBSD 5.2.1-RELEASE.
Recently I tried to install 6.0-CURRENT-SNAP004 on it, but boot from
CD gives errors regarding ahc and just loops. I tried also 5.3-RELEASE
and 5.4-RELEASE, they show the same behavior. Then I found a 5.3-BETA2
CD, it worked. I am attaching verbose boot logs both from 5.2.1 and
from 6.0. Please let me know if you need any additional information to
help me resolve this problem.
Thanks,
Arthur
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc09e3000.
MP Configuration Table version 1.4 found at 0xc009e560
APIC: Using the MPTable enumerator.
SMP: Added CPU 1 (BSP)
SMP: Added CPU 0 (AP)
MPTable: <HP XU/XW >
Calibrating clock(s) ... i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012435 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (128 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x0000000007d99fff, 118951936 bytes (29041 pages)
avail memory = 120754176 (115 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd77d (c00fd77d) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd710+0x289
pnpbios: Found PnP BIOS data at 0xc00f77f0
pnpbios: Entry = f0000:b6ee Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: active-hi
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: active-hi
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: active-hi
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: active-hi
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: active-hi
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: active-hi
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: active-hi
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: active-lo
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: active-lo
ioapic0: intpin 11 trigger: edge
ioapic0: intpin 11 polarity: active-hi
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: active-hi
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: active-hi
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: active-hi
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: active-hi
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: active-lo
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: active-lo
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: active-lo
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: active-lo
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: active-hi
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: active-hi
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b90
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 D 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 B 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 C 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 D 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 D 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 8 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 9 A 0x63 3 4 5 6 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7180, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7181, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x000f, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fce0, size 5, enabled
pcib0: slot 7 INTD routed to irq 19
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=19
map[90]: type 4, range 32, base 00008800, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 32, base fedff000, size 12, enabled
pcib0: slot 8 INTA routed to irq 16
found-> vendor=0x9004, dev=0x8378, revid=0x01
bus=0, slot=8, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fedfe000, size 12, enabled
pcib0: slot 9 INTA routed to irq 19
found-> vendor=0x9004, dev=0x6078, revid=0x03
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=19
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000fcc0, size 5, enabled
map[14]: type 1, range 32, base fedfdc00, size 5, enabled
pcib0: slot 17 INTA routed to irq 18
found-> vendor=0x1022, dev=0x2000, revid=0x25
bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
intpin=a, irq=18
map[10]: type 4, range 32, base 0000f000, size 8, enabled
map[14]: type 1, range 32, base fedfc000, size 12, enabled
map[18]: type 3, range 32, base fc000000, size 25, enabled
pcib0: slot 18 INTA routed to irq 16
found-> vendor=0x9004, dev=0x1478, revid=0x01
bus=0, slot=18, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
intpin=a, irq=16
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfe000000-0xfebfffff
pcib1: prefetched decode 0xf6000000-0xf6ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f6000000, size 24, enabled
map[14]: type 1, range 32, base febf8000, size 14, enabled
map[18]: type 1, range 32, base fe000000, size 23, enabled
pcib1: slot 0 INTA routed to irq 18
found-> vendor=0x102b, dev=0x051f, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 19 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x8800-0x880f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec 398X Ultra SCSI RAID adapter> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 16 at device 8.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 440 instructions downloaded
ahc0: Features 0x5, Bugs 0x11, Flags 0x20485563
aic7880: Ultra Wide Channel B, SCSI Id=15, 16/253 SCBs
ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xf400-0xf4ff mem 0xfedfe000-0xfedfefff irq 19 at device 9.0 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination enabled
ahc1: Downloading Sequencer Program... 459 instructions downloaded
ahc1: Features 0x10101, Bugs 0x35, Flags 0x485540
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xfcc0-0xfcdf mem 0xfedfdc00-0xfedfdc1f irq 18 at device 17.0 on pci0
pcn0: Ethernet address: 00:60:b0:c3:a9:7e
miibus0: <MII bus> on pcn0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn0: bpf attached
pci0: <memory> at device 18.0 (no driver attached)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
ADS7180: start dependent (0)
ADS7180: adding irq mask 0xa0
ADS7180: adding dma mask 0x2
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x4a0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (2)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: end dependent
ADS7181: start dependent (0)
ADS7181: adding irq mask 0xaa0
ADS7181: adding io range 0x300-0x331, size=0x2, align=0x30
ADS7181: start dependent (1)
ADS7181: adding irq mask 0x8ea0
ADS7181: adding io range 0x300-0x421, size=0x2, align=0x30
ADS7181: end dependent
ADS7182: start dependent (0)
ADS7182: adding io range 0x200-0x207, size=0x8, align=0x8
ADS7182: start dependent (1)
ADS7182: adding io range 0x200-0x20f, size=0x8, align=0x8
ADS7182: end dependent
ex_isa_identify()
pnpbios: 17 devices, largest 184 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x96-0x97, size=0x2, align=0x1
PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0xe0-0xe7, size=0x8, align=0x1
PNP0c02: adding io range 0xe8-0xe9, size=0x2, align=0x1
PNP0c02: adding io range 0x8400-0x8403, size=0x4, align=0x1
PNP0c02: adding io range 0x8404-0x8407, size=0x4, align=0x1
PNP0c02: adding io range 0x8408-0x8409, size=0x2, align=0x1
PNP0c02: adding io range 0x8410-0x841f, size=0x10, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x8800-0x880f, size=0x10, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 16 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 18 device ID PNP0f13 (130fd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xd6fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x68a1 0x68b1 0x68a1 0x68a1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x68a1 0x68a9 0x68a1 0x68a1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x500-0x50f,0x388-0x38b,0x220-0x22f irq 5 drq 0,1 on isa0
adv1: Invalid baseport of 0x300 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x300-0x301 irq 9 on isa0
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Failing probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x200-0x207 on isa0
adv1: Invalid baseport of 0x96 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 300012435 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
ata0-master: setting PIO3 on Intel PIIX4 chip
acd0: <MATSHITA CR-585/ZP18> CDROM drive at ata0 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period 44, offset 8
(ahc0:A:0:0): Received SDTR period 44, offset 8
Filtered to period 44, offset 8
ahc0: target 0 synchronous at 3.6MHz, offset = 0x8
GEOM: create disk da0 dp=0xc20d4050
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST19101W 8301> Fixed Direct Access SCSI-2 device
pass0: Serial Number LH117367
pass0: 7.352MB/s transfers (3.676MHz, offset 8, 16bit), Tagged Queueing Enabled
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST19101W 8301> Fixed Direct Access SCSI-2 device
da0: Serial Number LH117367
da0: 7.352MB/s transfers (3.676MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 242122752 end 510558207
GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423
GEOM: Configure da0s1d, start 510558208 length 268435456 end 778993663
GEOM: Configure da0s1e, start 778993664 length 268435456 end 1047429119
GEOM: Configure da0s1f, start 1047429120 length 8049698304 end 9097127423
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 100243 free (451 frags, 12474 blocks, 0.4% fragmentation)
/dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1e: clean, 126836 free (28 frags, 15851 blocks, 0.0% fragmentation)
/dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 3413007 free (25567 frags, 423430 blocks, 0.7% fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 126763 free (43 frags, 15840 blocks, 0.0% fragmentation)
Setting hostname: kayak.lc.********.com.
pcn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.20.1.143 netmask 0xffff0000 broadcast 10.20.255.255
inet6 fe80::260:b0ff:fec3:a97e%pcn0 prefixlen 64 tentative scopeid 0x1
ether 00:60:b0:c3:a9:7e
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
add net default: gateway 10.20.0.1
Additional routing options:
.
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
Jun 4 22:04:34 kayak syslogd: kernel boot file is /boot/kernel.old/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting moused:
.
Starting background file system checks in 60 seconds.
Sat Jun 4 22:06:15 AMST 2005
Jun 4 22:07:15 kayak login: ROOT LOGIN (root) ON ttyv0
[-- Attachment #3 --]
OK boot -v
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009e400
SMAP type=02 base=000000000009e400 len=0000000000001c00
SMAP type=02 base=00000000000f0c00 len=000000000000f400
SMAP type=01 base=0000000000100000 len=0000000007f00000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT-SNAP004 #0: Thu Jun 2 06:12:51 UTC 2005
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0eb2000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0eb216c.
MP Configuration Table version 1.4 found at 0xc009e560
APIC: Using the MPTable enumerator.
SMP: Added CPU 1 (BSP)
SMP: Added CPU 0 (AP)
MPTable: <HP XU/XW >
Calibrating clock(s) ... i8254 clock: 1193194 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012452 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,MMX>
real memory = 134217728 (128 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x0000000007d8ffff, 114720768 bytes (28008 pages)
avail memory = 117690368 (112 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd77d (c00fd77d) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd710+0x289
pnpbios: Found PnP BIOS data at 0xc00f77f0
pnpbios: Entry = f0000:b6ee Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 11 bus ISA
ioapic0: intpin 11 trigger: edge
ioapic0: intpin 11 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 D 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 B 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 C 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 D 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 D 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 8 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 9 A 0x63 3 4 5 6 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7180, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7181, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x000f, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 0000fce0, size 5, enabled
pcib0: slot 7 INTD routed to irq 19
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00008800, size 4, enabled
found-> vendor=0x9004, dev=0x8378, revid=0x01
bus=0, slot=8, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 32, base fedff000, size 12, enabled
pcib0: slot 8 INTA routed to irq 16
found-> vendor=0x9004, dev=0x6078, revid=0x03
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fedfe000, size 12, enabled
pcib0: slot 9 INTA routed to irq 19
found-> vendor=0x1022, dev=0x2000, revid=0x25
bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000fcc0, size 5, enabled
map[14]: type 1, range 32, base fedfdc00, size 5, enabled
pcib0: slot 17 INTA routed to irq 18
found-> vendor=0x9004, dev=0x1478, revid=0x01
bus=0, slot=18, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000f000, size 8, enabled
map[14]: type 1, range 32, base fedfc000, size 12, enabled
map[18]: type 3, range 32, base fc000000, size 25, enabled
pcib0: slot 18 INTA routed to irq 16
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d
evice 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfe000000-0xfebfffff
pcib1: prefetched decode 0xf6000000-0xf6ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x102b, dev=0x051f, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 3, range 32, base f6000000, size 24, enabled
pcib1: (null) requested memory range 0xf6000000-0xf6ffffff: good
map[14]: type 1, range 32, base febf8000, size 14, enabled
pcib1: (null) requested memory range 0xfebf8000-0xfebfbfff: good
map[18]: type 1, range 32, base fe000000, size 23, enabled
pcib1: (null) requested memory range 0xfe000000-0xfe7fffff: good
pcib1: slot 0 INTA routed to irq 18
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xfcb0-0xfcbf at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcb0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 19 at de
vice 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfce0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x8800-0x880f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec 398X Ultra SCSI RAID adapter> port 0xf800-0xf8ff mem 0xfedff000-0
xfedfffff irq 16 at device 8.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf800
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 441 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x20485563
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel B, SCSI Id=15, 16/253 SCBs
ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xf400-0xf4ff mem 0xfedfe000-0xf
edfefff irq 19 at device 9.0 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination enabled
ahc1: Downloading Sequencer Program... 460 instructions downloaded
ahc1: Features 0x10101, Bugs 0x35, Flags 0x8485560
ahc1: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcn0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xfcc0
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xfcc0-0xfcdf mem 0xfedfdc00-0xfedfdc1f
irq 18 at device 17.0 on pci0
pcn0: Chip ID 2623 (Am79C971)
miibus0: <MII bus> on pcn0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-F
DX, auto
pcn0: bpf attached
pcn0: Ethernet address: 00:60:b0:c3:a9:7e
pcn0: if_start running deferred for Giant
pcn0: [GIANT-LOCKED]
pci0: <memory> at device 18.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
ADS7180: start dependent (0)
ADS7180: adding irq mask 0xa0
ADS7180: adding dma mask 0x2
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x4a0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (2)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: end dependent
ADS7181: start dependent (0)
ADS7181: adding irq mask 0xaa0
ADS7181: adding io range 0x300-0x331, size=0x2, align=0x30
ADS7181: start dependent (1)
ADS7181: adding irq mask 0x8ea0
ADS7181: adding io range 0x300-0x421, size=0x2, align=0x30
ADS7181: end dependent
ADS7182: start dependent (0)
ADS7182: adding io range 0x200-0x207, size=0x8, align=0x8
ADS7182: start dependent (1)
ADS7182: adding io range 0x200-0x20f, size=0x8, align=0x8
ADS7182: end dependent
PNP Identify complete
ex_isa_identify()
pnpbios: 17 devices, largest 184 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x96-0x97, size=0x2, align=0x1
PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0xe0-0xe7, size=0x8, align=0x1
PNP0c02: adding io range 0xe8-0xe9, size=0x2, align=0x1
PNP0c02: adding io range 0x8400-0x8403, size=0x4, align=0x1
PNP0c02: adding io range 0x8404-0x8407, size=0x4, align=0x1
PNP0c02: adding io range 0x8408-0x8409, size=0x2, align=0x1
PNP0c02: adding io range 0x8410-0x841f, size=0x10, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x8800-0x880f, size=0x10, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 16 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 17 device ID PNP0501 (0105d041)
pnpbios: handle 18 device ID PNP0f13 (130fd041)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd6fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x68a1 0x68b1 0x68a1 0x68a1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x68a1 0x68a9 0x68a1 0x68a1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> on isa0
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Faili
ng probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
psmcpnp0: irq resource info is missing; assuming irq 12
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x220-0x22f,0x388-0x38
b,0x500-0x50f irq 5 drq 1,0 on isa0
adv1: Invalid baseport of 0x300 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x300-0x301 irq 9 on i
sa0
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x200-0x207 on isa0
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 33334648 hz
Timecounter "TSC" frequency 300012452 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a78dc4
ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
acd0: setting PIO3 on Intel PIIX4 chip
acd0: <MATSHITA CR-585/ZP18> CDROM drive at ata0 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
ahc1: Selection Timeout on A:0. 0 SCBs aborted
ahc1: Selection Timeout on A:1. 0 SCBs aborted
ahc1: Selection Timeout on A:2. 0 SCBs aborted
ahc1: Selection Timeout on A:3. 0 SCBs aborted
ahc1: Selection Timeout on A:4. 0 SCBs aborted
ahc1: Selection Timeout on A:5. 0 SCBs aborted
ahc1: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x17f
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x2
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCS
IRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0xe 0x0 0x0 0x174
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 9
QINFIFO entries: 9 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
15 SCB_CONTROL[0x0] SCB_SCSIID[0xef]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xcf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xbf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x9f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x5f]:(OID) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x2f]:(OID) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x1f]:(OID) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xdf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xaf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x8f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x7f]:(OID|TWIN_TID) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0x6f]:(OID) SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0x4f]:(OID) SCB_LUN[0x0]
8 SCB_CONTROL[0x0] SCB_SCSIID[0x3f]:(OID) SCB_LUN[0x0]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xf]:(OID) SCB_LUN[0x0]
Kernel Free SCB list: 13 12 11 10
Untagged Q(0): 9
Untagged Q(1): 1
Untagged Q(2): 0
Untagged Q(3): 8
Untagged Q(4): 7
Untagged Q(5): 19
Untagged Q(6): 6
Untagged Q(7): 5
Untagged Q(8): 4
Untagged Q(9): 18
Untagged Q(10): 3
Untagged Q(11): 17
Untagged Q(12): 16
Untagged Q(13): 2
Untagged Q(14): 15
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe13:ahc0:0:13:0): SCB 0x2 - timed out
sg[0] - Addr 0x7aee284 : Length 36
(probe13:ahc0:0:13:0): SCB 2: Immediate reset. Flags = 0x620
(probe13:ahc0:0:13:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Request Requeued
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Request Requeued
(probe4:ahc0:0:4:0): Retrying Command
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:7:0): Request Requeued
(probe7:ahc0:0:7:0): Retrying Command
(probe8:ahc0:0:8:0): Request Requeued
(probe8:ahc0:0:8:0): Retrying Command
(probe10:ahc0:0:10:0): Request Requeued
(probe10:ahc0:0:10:0): Retrying Command
(probe13:ahc0:0:13:0): Request Requeued
(probe13:ahc0:0:13:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe5:ahc0:0:5:0): Request Requeued
(probe5:ahc0:0:5:0): Retrying Command
(probe9:ahc0:0:9:0): Request Requeued
(probe9:ahc0:0:9:0): Retrying Command
(probe11:ahc0:0:11:0): Request Requeued
(probe11:ahc0:0:11:0): Retrying Command
(probe12:ahc0:0:12:0): Request Requeued
(probe12:ahc0:0:12:0): Retrying Command
(probe14:ahc0:0:14:0): Request Requeued
(probe14:ahc0:0:14:0): Retrying Command
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x17f
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x3
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCS
IRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0xe 0xe 0x0 0x174
SCB count = 20
Kernel NEXTQSCB = 9
Card NEXTQSCB = 14
QINFIFO entries: 14 15 16 17 18 19 0 1 2 3 4 5 6 7 8
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
8 SCB_CONTROL[0x0] SCB_SCSIID[0xef]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xcf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xbf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x9f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x5f]:(OID) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x2f]:(OID) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x1f]:(OID) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xdf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xaf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x8f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x7f]:(OID|TWIN_TID) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0x6f]:(OID) SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0x4f]:(OID) SCB_LUN[0x0]
15 SCB_CONTROL[0x0] SCB_SCSIID[0x3f]:(OID) SCB_LUN[0x0]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xf]:(OID) SCB_LUN[0x0]
Kernel Free SCB list: 13 12 11 10
Untagged Q(0): 14
Untagged Q(1): 2
Untagged Q(2): 3
Untagged Q(3): 15
Untagged Q(4): 16
Untagged Q(5): 4
Untagged Q(6): 17
Untagged Q(7): 18
Untagged Q(8): 19
Untagged Q(9): 5
Untagged Q(10): 0
Untagged Q(11): 6
Untagged Q(12): 7
Untagged Q(13): 1
Untagged Q(14): 8
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe10:ahc0:0:10:0): SCB 0x0 - timed out
sg[0] - Addr 0x7aee884 : Length 36
(probe10:ahc0:0:10:0): SCB 0: Immediate reset. Flags = 0x620
(probe10:ahc0:0:10:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Request Requeued
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Request Requeued
(probe4:ahc0:0:4:0): Retrying Command
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:7:0): Request Requeued
(probe7:ahc0:0:7:0): Retrying Command
(probe8:ahc0:0:8:0): Request Requeued
(probe8:ahc0:0:8:0): Retrying Command
(probe10:ahc0:0:10:0): Request Requeued
(probe10:ahc0:0:10:0): Retrying Command
(probe13:ahc0:0:13:0): Request Requeued
(probe13:ahc0:0:13:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe5:ahc0:0:5:0): Request Requeued
(probe5:ahc0:0:5:0): Retrying Command
(probe9:ahc0:0:9:0): Request Requeued
(probe9:ahc0:0:9:0): Retrying Command
(probe11:ahc0:0:11:0): Request Requeued
(probe11:ahc0:0:11:0): Retrying Command
(probe12:ahc0:0:12:0): Request Requeued
(probe12:ahc0:0:12:0): Retrying Command
(probe14:ahc0:0:14:0): Request Requeued
(probe14:ahc0:0:14:0): Retrying Command
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f0d84caa05071509177fe86f32>