Date: Mon, 19 May 2003 14:37:00 -0400 From: Hans Fiedler <hans@hermes.louisville.edu> To: freebsd-questions@freebsd.org Subject: USR internal modem problem in FreeBSD 5.0 Message-ID: <20030519143700.A2787@hectate.louisville.edu>
next in thread | raw e-mail | index | archive | help
I'm trying to get a USR internal modem, working and am getting something I've never seen before. I've done quite a few modems in the past, but they've all been external, and I've never seen anything quite like this. I've got both an internal and external sportster on the same system, although I'd like to just use the internal, since it's a 1U rackmount system with a single serial port that I'd like to use as a console port. When I call into the external modem everything works fine. When I call into the internal modem the Password prompt stays on the same line as the userid that was typed in. After logging in everything seems to work fine except there are no prompts from the shell. If I use watch from another session telneted in it looks like the system is putting the return after entering the userid and the prompts in the buffers, but they're not getting sent out the modem. The system is an IBM x305 with a single build in serial port, running FreeBSD 5.0-RELEASE-p7. The serial is sio0 and the PCI modem is sio4. There aren't any settings on the internal modem card itself, dips or jumpers, so I seem to be stuck with what PnP/PCI gives me. The external modem (ati3) id's itself as "U.S. Robotics 33600 Fax V5.8.3" and the internal modem id's as "U.S. Robotics 56K FAX INT V5.22.45". The internal is the performance pro, not a winmodem. The modem settings are identical; The only difference I can see is one is internal and the other is external, The startup messages about the serial ports are sio0: <3COM PCI FaxModem> port 0x5000-0x5007 irq 3 at device 2.0 on pci1 sio0: moving to sio4 sio4: type 16550A sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled These are the various modem and config files. --- U.S. Robotics 33600 Fax Settings... B0 E0 F1 M0 Q1 V1 X4 Y0 BAUD=38400 PARITY=N WORDLEN=8 DIAL=TONE ON HOOK CID=0 &A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S1 &T4 &U0 &Y1 S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=001 S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=000 S32=000 S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001 S41=000 S42=000 --- U.S. Robotics 56K FAX INT Settings... B0 E0 F1 M0 Q1 V1 X4 Y0 BAUD=38400 PARITY=N WORDLEN=8 DIAL=TONE ON HOOK CID=0 &A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S1 &T4 &U0 &Y1 S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=001 S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=000 S32=000 S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001 S41=000 S42=000 ------------------------------------------------------------------------------- /etc/ttys ttyd0 "/usr/libexec/getty std.38400" dialup on secure ttyd4 "/usr/libexec/getty std.38400" dialup on secure ------------------------------------------------------------------------------- /etc/rc.serial stty -f /dev/ttyd0 crtsdts speed 38400 stty -f /dev/ttyd4 crtsdts speed 38400 ------------------------------------------------------------------------------- -- Hans K. Fiedler Information Technology Network Analyst Communications Services hans@hermes.louisville.edu University of Louisville (502)852-7427 Louisville, Ky. 40292
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030519143700.A2787>