Date: Wed, 7 Nov 2007 22:17:40 +0100 From: Marc Fonvieille <marc@blackend.org> To: acpi@freebsd.org Subject: Random power off under 7-BETA2 Message-ID: <20071107211740.GA1038@gothic.blackend.org>
next in thread | raw e-mail | index | archive | help
Hello, With RELENG_7, the command "halt -p" sometimes (hardly in fact) turn off the power, most of time I have to turn off the machine by myself. On the same machine and with RELENG_6, "halt -p" never fails in turning off the power. The machine is UP, here's the kernel config file: include GENERIC ident GOTHIC nooptions SCHED_4BSD options SCHED_ULE nooptions SMP nodevice apic % sysctl -a | grep acpi debug.acpi.suspend_bounce: 0 debug.acpi.do_powerstate: 1 debug.acpi.acpi_ca_version: 20070320 debug.acpi.ec.timeout: 750 debug.acpi.ec.polled: 0 debug.acpi.ec.burst: 0 debug.acpi.semaphore_debug: 0 debug.acpi.resume_beep: 0 hw.acpi.supported_sleep_state: S1 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 machdep.acpi_timer_freq: 3579545 machdep.acpi_root: 1009920 dev.acpi.0.%desc: ASUS A7V-133 dev.acpi.0.%driver: acpi dev.acpi.0.%parent: nexus0 dev.acpi_sysresource.0.%desc: System Resource dev.acpi_sysresource.0.%driver: acpi_sysresource dev.acpi_sysresource.0.%location: handle=\_SB_.MEM1 dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0 dev.acpi_sysresource.0.%parent: acpi0 dev.acpi_sysresource.1.%desc: System Resource dev.acpi_sysresource.1.%driver: acpi_sysresource dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.PX40.SYS1 dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=1 dev.acpi_sysresource.1.%parent: acpi0 dev.acpi_sysresource.2.%desc: System Resource dev.acpi_sysresource.2.%driver: acpi_sysresource dev.acpi_sysresource.2.%location: handle=\_SB_.PCI0.PX40.SYS2 dev.acpi_sysresource.2.%pnpinfo: _HID=PNP0C02 _UID=2 dev.acpi_sysresource.2.%parent: acpi0 dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz dev.acpi_timer.0.%driver: acpi_timer dev.acpi_timer.0.%location: unknown dev.acpi_timer.0.%pnpinfo: unknown dev.acpi_timer.0.%parent: acpi0 dev.pci_link.0.%parent: acpi0 dev.pci_link.1.%parent: acpi0 dev.pci_link.2.%parent: acpi0 dev.pci_link.3.%parent: acpi0 dev.cpu.0.%parent: acpi0 dev.acpi_throttle.0.%desc: ACPI CPU Throttling dev.acpi_throttle.0.%driver: acpi_throttle dev.acpi_throttle.0.%parent: cpu0 dev.acpi_throttle.0.freq_settings: 10000/-1 9375/-1 8750/-1 8125/-1 7500/-1 6875/-1 6250/-1 5625/-1 5000/-1 4375/-1 3750/-1 3125/-1 2500/-1 1875/-1 1250/-1 625/-1 dev.acpi_button.0.%desc: Power Button dev.acpi_button.0.%driver: acpi_button dev.acpi_button.0.%location: handle=\_SB_.PWRB dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0 dev.acpi_button.0.%parent: acpi0 dev.acpi_button.0.wake: 1 dev.pcib.0.%parent: acpi0 dev.atpic.0.%parent: acpi0 dev.atdma.0.%parent: acpi0 dev.attimer.0.%parent: acpi0 dev.attimer.1.%parent: acpi0 dev.npxisa.0.%parent: acpi0 dev.fdc.0.%parent: acpi0 dev.sio.0.%parent: acpi0 dev.sio.1.%parent: acpi0 dev.atkbdc.0.%parent: acpi0 Here's verbose dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA2 #12: Wed Nov 7 17:26:48 CET 2007 marc@gothic.blackend.org:/usr/obj/usr/src/sys/GOTHIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc127c000. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc127c174. Preloaded elf module "/boot/kernel/sound.ko" at 0xc127c224. Preloaded elf module "/boot/kernel/cd9660_iconv.ko" at 0xc127c2d0. Preloaded elf module "/boot/kernel/libiconv.ko" at 0xc127c384. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc127c434. Preloaded elf module "/boot/kernel/linux.ko" at 0xc127c4e0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc127c58c. Calibrating clock(s) ... i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1206171805 Hz CPU: AMD Athlon(tm) Processor (1206.17-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1073659904 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001425000 - 0x000000003eda3fff, 1033367552 bytes (252287 pages) avail memory = 1033068544 (985 MB) bios32: Found BIOS32 Service Directory header at 0xc00f92a0 bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1150 pnpbios: Found PnP BIOS data at 0xc00fc2b0 pnpbios: Entry = f0000:c2e0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ULE: setup cpu 0 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Nov 7 2007 17:26:07) ACPI: RSDP @ 0x0xf6900/0x0014 (v 0 ASUS ) ACPI: RSDT @ 0x0x3ffec000/0x002C (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031) ACPI: FACP @ 0x0x3ffec080/0x0074 (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031) ACPI: DSDT @ 0x0x3ffec100/0x2C2B (v 1 ASUS A7V-133 0x00001000 MSFT 0x0100000B) ACPI: FACS @ 0x0x3ffff000/0x0040 ACPI: BOOT @ 0x0x3ffec040/0x0028 (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031) npx0: INT 16 interface acpi0: <ASUS A7V-133> on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8274000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.MFEN -> bus 0 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.IOCG -> bus 0 dev 4 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed ACPI timer: 0/4 0/5 0/6 1/1 0/5 0/4 0/4 0/4 0/5 0/4 -> 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0xe410 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.12.INTA at func 0: 11 ACPI: Found matching pin for 0.11.INTA at func 0: 15 ACPI: Found matching pin for 0.10.INTA at func 0: 10 ACPI: Found matching pin for 0.10.INTC at func 2: 11 ACPI: Found matching pin for 0.9.INTA at func 0: 5 ACPI: Found matching pin for 0.13.INTA at func 0: 5 ACPI: Found matching pin for 0.17.INTA at func 0: 15 ACPI: Found matching pin for 0.4.INTD at func 2: 5 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1106, dev=0x0305, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe6000000, size 25, enabled found-> vendor=0x1106, dev=0x8305, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D3 current D0 found-> vendor=0x1106, dev=0x0686, revid=0x40 domain=0, bus=0, slot=4, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 domain=0, bus=0, slot=4, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xd800, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x16 domain=0, bus=0, slot=4, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled pcib0: matched entry for 0.4.INTD (src \\_SB_.LNKD:0) pcib0: slot 4 INTD routed to irq 5 via \\_SB_.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x16 domain=0, bus=0, slot=4, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled pcib0: matched entry for 0.4.INTD (src \\_SB_.LNKD:0) pcib0: slot 4 INTD routed to irq 5 via \\_SB_.LNKD found-> vendor=0x1106, dev=0x3057, revid=0x40 domain=0, bus=0, slot=4, func=4 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1000, dev=0x000f, revid=0x26 domain=0, bus=0, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa400, size 8, enabled map[14]: type Memory, range 32, base 0xd5800000, size 8, enabled map[18]: type Memory, range 32, base 0xd5000000, size 12, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKD:0) pcib0: slot 9 INTA routed to irq 5 via \\_SB_.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x62 domain=0, bus=0, slot=10, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xa000, size 5, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.LNKC:0) pcib0: slot 10 INTA routed to irq 10 via \\_SB_.LNKC found-> vendor=0x1106, dev=0x3104, revid=0x65 domain=0, bus=0, slot=10, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd4800000, size 8, enabled pcib0: matched entry for 0.10.INTC (src \\_SB_.LNKA:0) pcib0: slot 10 INTC routed to irq 11 via \\_SB_.LNKA found-> vendor=0x11ad, dev=0x0002, revid=0x20 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 map[10]: type I/O Port, range 32, base 0x9800, size 8, enabled map[14]: type Memory, range 32, base 0xd4000000, size 8, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKB:0) pcib0: slot 11 INTA routed to irq 15 via \\_SB_.LNKB found-> vendor=0x11ad, dev=0x0002, revid=0x20 domain=0, bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type I/O Port, range 32, base 0x9400, size 8, enabled map[14]: type Memory, range 32, base 0xd3800000, size 8, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.LNKA:0) pcib0: slot 12 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1274, dev=0x5880, revid=0x02 domain=0, bus=0, slot=13, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=5 powerspec 1 supports D0 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x9000, size 6, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKD:0) pcib0: slot 13 INTA routed to irq 5 via \\_SB_.LNKD found-> vendor=0x105a, dev=0x0d30, revid=0x02 domain=0, bus=0, slot=17, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x8800, size 3, enabled map[14]: type I/O Port, range 32, base 0x8400, size 2, enabled map[18]: type I/O Port, range 32, base 0x8000, size 3, enabled map[1c]: type I/O Port, range 32, base 0x7800, size 2, enabled map[20]: type I/O Port, range 32, base 0x7400, size 6, enabled map[24]: type Memory, range 32, base 0xd3000000, size 17, enabled pcib0: matched entry for 0.17.INTA (src \\_SB_.LNKB:0) pcib0: slot 17 INTA routed to irq 15 via \\_SB_.LNKB pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xd6000000-0xd7dfffff pcib1: prefetched decode 0xd7f00000-0xe5ffffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0111, revid=0xb2 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd6000000, size 24, enabled pcib1: requested memory range 0xd6000000-0xd6ffffff: good map[14]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled pcib1: requested memory range 0xd8000000-0xdfffffff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0) pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKA pcib1: slot 0 INTA is routed to irq 11 nvidia0: <GeForce2 MX 100/200> mem 0xd6000000-0xd6ffffff,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1 nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xd6000000 nvidia0: Reserved 0x8000000 bytes for rid 0x14 type 3 at 0xd8000000 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 4.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered sym0: <875> port 0xa400-0xa4ff mem 0xd5800000-0xd58000ff,0xd5000000-0xd5000fff irq 5 at device 9.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xd5800000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd5000000 sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [GIANT-LOCKED] sym0: [ITHREAD] uhci2: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 10.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd4800000-0xd48000ff irq 11 at device 10.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd4800000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb3: EHCI version 1.0 usb3: companion controller, 2 ports each: usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered dc0: <82c169 PNIC 10/100BaseTX> port 0x9800-0x98ff mem 0xd4000000-0xd40000ff irq 15 at device 11.0 on pci0 dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800 miibus0: <MII bus> on dc0 bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 00:a0:cc:da:b3:ec dc0: [MPSAFE] dc0: [ITHREAD] dc1: <82c169 PNIC 10/100BaseTX> port 0x9400-0x94ff mem 0xd3800000-0xd38000ff irq 11 at device 12.0 on pci0 dc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400 miibus1: <MII bus> on dc1 bmtphy1: <BCM5201 10/100baseTX PHY> PHY 1 on miibus1 bmtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: bpf attached dc1: Ethernet address: 00:a0:cc:da:a2:2c dc1: [MPSAFE] dc1: [ITHREAD] pcm0: <Creative CT5880-C> port 0x9000-0x903f irq 5 at device 13.0 on pci0 pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0x9000 pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 18f2000, 1000; 0xc4479000 -> 18f2000 pcm0: sndbuf_setmap 18f4000, 1000; 0xc447b000 -> 18f4000 pcm0: sndbuf_setmap 18f6000, 1000; 0xc447d000 -> 18f6000 pcm0: <Playback: DAC1,DAC2 / Record: ADC> atapci1: <Promise PDC20265 UDMA100 controller> port 0x8800-0x8807,0x8400-0x8403,0x8000-0x8007,0x7800-0x7803,0x7400-0x743f mem 0xd3000000-0xd301ffff irq 15 at device 17.0 on pci0 atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x7400 atapci1: [MPSAFE] atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8800 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8400 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8000 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7800 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: irq maps: 0x801 0x809 0x801 0x801 sio1: irq maps: 0x801 0x809 0x801 0x801 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd5fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub0 ums0: 3 buttons and Z dir. uhub4: <vendor 0x05e3 USB Hub, class 9/0, rev 1.10/3.04, addr 2> on uhub2 uhub4: 4 ports with 4 removable, self powered Device configuration finished. procfs registered Timecounter "TSC" frequency 1206171805 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached rr232x: no controller detected. Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire acd0: setting PIO4 on 82C686B chip acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: setting UDMA33 on 82C686B chip acd0: <DVD-RW IDE1008/VER 0059> DVDR drive at ata0 as master acd0: read 171KB/s (6876KB/s) write 6890KB/s (6876KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad4: setting PIO4 on PDC20265 chip ad4: setting UDMA100 on PDC20265 chip ad4: 76319MB <Seagate ST3802110A 3.AAJ> at ata2-master UDMA100 ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Promise check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed GEOM: new disk ad4 pass0 at sym0 bus 0 target 3 lun 0 pass0: <PLEXTOR CD-ROM PX-40TS 1.00> Removable CD-ROM SCSI-2 device pass0: Serial Number 3 pass0: 20.000MB/s transfers (20.000MHz, offset 15) GEOM: new disk cd0 ATA PseudoRAID loaded (cd0:sym0:0:3:0): Retrying Command (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error cd0 at sym0 bus 0 target 3 lun 0 cd0: <PLEXTOR CD-ROM PX-40TS 1.00> Removable CD-ROM SCSI-2 device cd0: Serial Number 3 cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error Trying to mount root from ufs:/dev/ad4s2a start_init: trying /sbin/init dc0: dc_setcfg: failed to force tx to idle state dc0: dc_setcfg: failed to force tx to idle state -- Marc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071107211740.GA1038>