Date: Thu, 10 Aug 2006 12:59:10 +0900 From: Ganbold <ganbold@micom.mng.net> To: freebsd-stable@freebsd.org Subject: boot problem with ACPI disabled Message-ID: <44DAAF0E.3080404@micom.mng.net>
next in thread | raw e-mail | index | archive | help
Hi, I've got fatal trap on Dell D620 laptop when I tried to boot with ACPI disabled. Kernel compiled with APIC and SMP options. GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #7: Tue Aug 8 12:52:48 ULAST 2006 tsgan@devil.micom.mng.net:/usr/obj/usr/src/sys/DEVIL Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1664.45-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>> AMD Features=0x100000<NX> Cores per package: 2 real memory = 1063849984 (1014 MB) avail memory = 1031909376 (984 MB) ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.2.INTA pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <display> at device 2.1 (no driver attached) pcm0: <Intel 82801G High Definition Audio Controller> mem 0xdfebc000-0xdfebffff irq 10 at device 27.0 on pci0 pcm0: Output Streams: 4, Input Streams: 4, Bidirectional Streams: 0 pcm0: CORB Size: 256, RIRB Size: 256 pcib1: <PCIBIOS PCI-PCI bridge> at device 28.0 on pci0 pci11: <PCI bus> on pcib1 pcib2: <PCIBIOS PCI-PCI bridge> at device 28.1 on pci0 pci12: <PCI bus> on pcib2 pci12: <network> at device 0.0 (no driver attached) pcib3: <PCIBIOS PCI-PCI bridge> at device 28.2 on pci0 pci9: <PCI bus> on pcib3 bge0: <Broadcom BCM5752 A2, ASIC rev. 0x6002> mem 0xdfcf0000-0xdfcfffff irq 5 at device 0.0 on pci9 bge0: firmware handshake timed out miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:14:22:fb:32:a6 uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 10 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 5 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 3 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 9 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci3: <PCI bus> on pcib4 cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> irq 5 at device 1.0 on pci3 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) kernel trap 30 with interrupts disabled Fatal trap 30: reserved (unknown) fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x70:0xc28d stack pointer = 0x28:0xf9c frame pointer = 0x28:0xfd4 code segment = base 0xc00f0000, limit 0xffff, type 0x1b = DPL 0, pres 1, def32 0, gran 0 processor eflags = IOPL = 0 current process = 0 (swapper) [thread pid 0 tid 0 ] Stopped at 0xc28d: *** error reading from address c28d *** db> trace Tracing pid 0 tid 0 td 0xc0873480 (null)(780001,0,b0202,ffe,0) at 0xc28d db> where Tracing pid 0 tid 0 td 0xc0873480 (null)(780001,0,b0202,ffe,0) at 0xc28d db> Ganbold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44DAAF0E.3080404>