From owner-freebsd-isp Mon Jan 17 9:52:54 2000 Delivered-To: freebsd-isp@freebsd.org Received: from tetron02.tetronsoftware.com (ftp.tetronsoftware.com [208.236.46.106]) by hub.freebsd.org (Postfix) with ESMTP id 72FBF14F08 for ; Mon, 17 Jan 2000 09:52:45 -0800 (PST) (envelope-from zeus@tetronsoftware.com) Received: from tetron02.tetronsoftware.com (ftp.tetronsoftware.com [208.236.46.106]) by tetron02.tetronsoftware.com (8.9.3/8.9.3) with ESMTP id LAA22617; Mon, 17 Jan 2000 11:55:13 -0600 (CST) (envelope-from zeus@tetronsoftware.com) Date: Mon, 17 Jan 2000 11:55:08 -0600 (CST) From: Gene Harris To: spork Cc: freebsd-isp@FreeBSD.ORG Subject: Re: high load, nothing happening? (LONG) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ummm... In rc.conf, have you verified that lo0 is in the network interfaces list and not auto? Sorry if this sounds rinky-dink, but it can cause a machine to slow to a crawl. *==============================================* *Gene Harris http://www.tetronsoftware.com* *FreeBSD Novice * *All ORBS.org SMTP connections are denied! * *==============================================* On Mon, 17 Jan 2000, spork wrote: > Hi, > > I'm trying my luck over here, I already posted to -questions without any > resolution. I'm including my original post and below that a summary of > some responses and my answers... > > [begin orginal post] > We just built a large webserver machine (PII-450, 896MB RAM, 30-odd G of > Mylex RAID, 3.3-R) that constantly runs a load of from 1 to 3, even though > it's not doing anything (still sitting as a staging server). The initial > startup is also very slow; after about 40 of the servers start there's > about a 15 second pause, then another 40, pause, etc... > > This box is running about 170 virtual hosts (and a full class C > of addresses aliased to fxp0) under Apache 1.3.9, with each vhost running > as it's own user and starting 3 servers at startup, so there are a large > *number* of processes, but no swapping with about half a gig of RAM left > free. > > I have maxusers at 512, NMBCLUSTERS at 4096, and the following sysctl > adjustments: > > kern.maxproc: 8212 > kern.maxfiles: 100000 kern.maxfilesperproc: 16424 > kern.maxprocperuid: 8211 kern.ipc.somaxconn: 512 > > This is all gathered from various "tuning for a big webserver" posts from > the various FBSD lists. > > systat, vmstat, iostat all look normal, and I've not seen any curious > entries in the logs. > > So that's the info, my questions are "why the load", and "is that OK"? > Something seems wrong here, but I'm at a loss. > > Any ideas where to start looking? > > [followup #1] > > > What does top(1) report? > > last pid: 23684; load averages: 3.74, 1.96, 1.46 up 7+21:10:15 10:35:38 > 449 processes: 1 running, 448 sleeping > CPU states: 0.0% user, 0.0% nice, 2.7% system, 0.0% interrupt, 97.3% idle > Mem: 62M Active, 355M Inact, 45M Wired, 8350K Buf, 418M Free > Swap: 784M Total, 784M Free > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND > 23684 root 30 0 1976K 944K RUN 0:00 3.08% 0.29% top > 904 root 2 -12 1036K 720K select 0:31 0.00% 0.00% xntpd > 4163 root 2 0 1468K 1096K select 0:13 0.00% 0.00% > httpd-apache_1 > 3399 root 2 0 1468K 1096K select 0:13 0.00% 0.00% > httpd-apache_1 > > [followup #2] > > > that value for NMBCLUSTERS is going to be lower than what maxusers at > > 512sets it to, try 16384 or leave it up to maxusers. > > [followup #3] > > > Hum....that could certainly contribute to load. Have you checked vmstat > ^^^^ (he's referring to the number of processes) > > to see what the system calls are like (frequency that is). > > Nothing's blocked, and the other numbers look very similar to much smaller > boxes doing nothing: > > procs memory page disks faults cpu > r b w avm fre flt re pi po fr sr da0 fd0 pa0 in sy cs us sy id > 0 0 0 106760426976 2 0 0 0 2 0 0 0 0 230 474 155 0 0 99 > 0 0 0 106760426976 4 0 0 0 0 0 0 0 0 233 408 136 0 2 98 > 0 0 0 106760426976 3 0 0 0 0 0 0 0 0 235 408 136 0 2 98 > > [followup #4] > > > what ???? > > you are asking why high load ??? > > don;t you see you have 500 processes on your box ?? > > it's normal to have 3 of load average if you got 500 processes! > > Here's a snippet from a shell/web server that is doing actual work. It > has less memory, a slower processor and a number of interactive users. > The load however rarely climbs above 1.0 unless a process goes runaway: > > last pid: 25042; load averages: 0.38, 0.35, 0.63 13:26:43 > 301 processes: 1 running, 300 sleeping > CPU states: 0.4% user, 0.0% nice, 0.8% system, 0.8% interrupt, 98.1% idle > Mem: 119M Active, 44M Inact, 36M Wired, 34M Cache, 6027K Buf, 17M Free > Swap: 640M Total, 37M Used, 603M Free, 6% Inuse > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND > 25040 root 28 0 844K 1120K RUN 0:00 1.89% 0.34% top > 24823 freddy 2 0 4180K 2964K select 0:00 0.23% 0.23% pine4.21 > 24919 byman 3 0 796K 1040K ttyin 0:00 0.04% 0.04% tcsh > 24537 inch_hom 2 0 640K 872K sbwait 0:00 0.04% 0.04%httpd-1.3.3-us > > So I'd kind of assume I wouldn't see a radical difference between a > machine with 500 idle processes and one that's running 300 and is in > active use... > > So if anyone even has a similarly configured box, I'd love to hear from > you. I feel something is wrong here, but I can't find it... > > Thanks, > > Charles > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message