From owner-freebsd-scsi@FreeBSD.ORG Sat Apr 26 20:38:21 2008 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BFCFA1065680 for ; Sat, 26 Apr 2008 20:38:21 +0000 (UTC) (envelope-from tomw@kace.com) Received: from dhost002-21.dex002.intermedia.net (dhost002-21.dex002.intermedia.net [64.78.21.92]) by mx1.freebsd.org (Postfix) with ESMTP id 830638FC43 for ; Sat, 26 Apr 2008 20:38:21 +0000 (UTC) (envelope-from tomw@kace.com) Received: from MISD002-2.dex002.intermedia.net ([64.78.61.47]) by dhost002-21.dex002.intermedia.net with Microsoft SMTPSVC(6.0.3790.3959); Sat, 26 Apr 2008 13:22:30 -0700 Received: from [192.168.0.8] ([64.72.180.71]) by MISD002-2.dex002.intermedia.net over TLS secured channel with Microsoft SMTPSVC(6.0.3790.3959); Sat, 26 Apr 2008 13:26:19 -0700 Message-ID: <48139050.1090906@kace.com> Date: Sat, 26 Apr 2008 15:28:00 -0500 From: Tom Whittaker User-Agent: Thunderbird 2.0.0.6 (X11/20071008) MIME-Version: 1.0 To: freebsd-scsi@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 26 Apr 2008 20:26:19.0903 (UTC) FILETIME=[C96BF0F0:01C8A7DB] Subject: Adaptec 3405 problems X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Apr 2008 20:38:21 -0000 On both Release and Stable 7.0 The adatec card will start spitting out timeout errors then will eventually give a message on the console that it can no longer communicate the the card and the machine has to be rebooted. I upgraded the bios to build 15728 but still am having issues. This happens about once a day. I disabled automatic failover today but its too soon to know if it will help. Any help would be greatly appreciated. Controllers found: 1 ---------------------------------------------------------------------- Controller information ---------------------------------------------------------------------- Controller Status : Optimal Channel description : SAS/SATA Controller Model : Adaptec 3405 Controller Serial Number : 7C48114BC8D Physical Slot : 2 Temperature : 54 C/ 129 F (Normal) Installed memory : 128 MB Copyback : Disabled Background consistency check : Disabled Automatic Failover : Disabled Global task priority : High Defunct disk drive count : 0 Logical devices/Failed/Degraded : 2/0/0 -------------------------------------------------------- Controller Version Information -------------------------------------------------------- BIOS : 5.2-0 (15728) Firmware : 5.2-0 (15728) Driver : 5.2-0 (15728) Boot Flash : 5.2-0 (15728) -------------------------------------------------------- Controller Battery Information -------------------------------------------------------- Status : Not Installed ---------------------------------------------------------------------- Logical device information ---------------------------------------------------------------------- Logical device number 0 Logical device name : root RAID level : 5 Status of logical device : Optimal Size : 279790 MB Stripe-unit size : 256 KB Read-cache mode : Enabled Write-cache mode : Enabled (write-back) Write-cache setting : Enabled (write-back) Partitioned : Yes Protected by Hot-Spare : No Bootable : Yes Failed stripes : No -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (0,0) Segment 1 : Present (0,1) Segment 2 : Present (0,2) Logical device number 1 Logical device name : kbackup RAID level : Simple_volume Status of logical device : Optimal Size : 476150 MB Read-cache mode : Enabled Write-cache mode : Enabled (write-back) Write-cache setting : Enabled (write-back) Partitioned : Yes Protected by Hot-Spare : No Bootable : No Failed stripes : No -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (0,3) ---------------------------------------------------------------------- Physical Device information ---------------------------------------------------------------------- Device #0 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,0 Reported Location : Connector 0, Device 0 Vendor : SEAGATE Model : ST3146855SS Firmware : 0002 World-wide name : 5000C50008BD6F08 Size : 140014 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #1 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,1 Reported Location : Connector 0, Device 1 Vendor : SEAGATE Model : ST3146855SS Firmware : 0002 World-wide name : 5000C50008BD2E40 Size : 140014 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #2 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SAS 3.0 Gb/s Reported Channel,Device : 0,2 Reported Location : Connector 0, Device 2 Vendor : SEAGATE Model : ST3146855SS Firmware : 0002 World-wide name : 5000C50008BDDEE0 Size : 140014 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #3 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 3.0 Gb/s Reported Channel,Device : 0,3 Reported Location : Connector 0, Device 3 Vendor : ST350032 Model : 0AS Firmware : SD15 Size : 476940 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #4 Device is an Enclosure services device Reported Channel,Device : 2,0 Enclosure ID : 0 Type : SES2 Vendor : ADAPTEC Model : Virtual SGPIO 0 Firmware : 0001 Status of Enclosure services device Temperature : Normal Command completed successfully. there is also a large file called arcerror.txt, I wont include the whole thing but the last line is: Sat 26Apr2008 (tz=0) 08:10:21.697145000 arcconf: ArcPhysicalDeviceAttach.cpp: Line #: 745 StorLib::getSystemConfig() ArcSystem::buildChildren(Ret & retOUT) ArcAdapter::buildChildren(Ret &retOUT) ArcPhysicalDeviceAttach::ArcPhysicalDeviceAttach( Channel *pChannelIN, ...) ArcPhysicalDeviceAttach::setFsaInfo() ArcPhysicalDeviceAttach::doScsiPassThru() *** FSA API Error: FsaSendScsiCommand () fsaStatus=479 ***