From owner-freebsd-hardware Mon Mar 3 1:36:16 2003 Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 483DF37B405 for ; Mon, 3 Mar 2003 01:36:08 -0800 (PST) Received: from minerva.hmdns.net (minerva.hmdns.net [216.118.75.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8926443FBF for ; Mon, 3 Mar 2003 01:36:06 -0800 (PST) (envelope-from tiran@azuritesoft.com) Received: from localhost ([127.0.0.1] helo=127.0.0.1) by minerva.hmdns.net with asmtp (Exim 3.36 #1) id 18pmMJ-0004cK-00 for freebsd-hardware@freebsd.org; Mon, 03 Mar 2003 04:35:44 -0500 Date: Mon, 3 Mar 2003 11:35:07 +0200 From: Aleksey Kukhar X-Mailer: The Bat! (v1.60q) Reply-To: Aleksey Kukhar X-Priority: 3 (Normal) Message-ID: <8038034751.20030303113507@azuritesoft.com> To: freebsd-hardware@freebsd.org Subject: multiport cards' operation problem on 5.0-RELEASE MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - minerva.hmdns.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [0 0] X-AntiAbuse: Sender Address Domain - azuritesoft.com Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi. Please advice me. I have computer with ancient isa multiport card in it. A couple of days before we have switched to 5.0-RELEASE from 4.2-RELEASE. Now I am experiencing problems with the multiport card. No hardware settings (including BIOS) were changed. Kernel reports that "sioXX: configured irq 10 not in bitmap of probed irqs 0". Irq 10 is dedicated (BIOS) to legacy ISA devices. Please, help me with this issue. I include some useful information about my system here (a-e): a) 4.2-RELEASE kernel messages (everything is ok): > : Copyright (c) 1992-2000 The FreeBSD Project. > : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > : The Regents of the University of California. All rights reserved. > : FreeBSD 4.2-RELEASE #1: Sat Jun 22 21:17:38 EEST 2002 > : povar@gw.osmu.odessa.ua:/usr/src/sys/compile/OSMU > : Timecounter "i8254" frequency 1193182 Hz > : Timecounter "TSC" frequency 334505198 Hz > : CPU: Pentium II/Pentium II Xeon/Celeron (334.51-MHz 686-class CPU) > : Origin = "GenuineIntel" Id = 0x650 Stepping = 0 > : Features=0x183f9ff > : real memory = 134201344 (131056K bytes) : config>> q > : avail memory = 127369216 (124384K bytes) > : Preloaded elf kernel "kernel" at 0xc0322000. > : Preloaded userconfig_script "/boot/kernel.conf" at 0xc032209c. > : Pentium Pro MTRR support enabled > : npx0: on motherboard > : npx0: INT 16 interface > : pcib0: on motherboard > : pci0: on pcib0 > : pcib2: at device 1.0 on pci0 > : pci1: on pcib2 > : pci1: at 0.0 > : isab0: at device 4.0 on pci0 > : isa0: on isab0 > : pci0: at 4.1 > : pci0: at 4.2 irq 15 > : rl0: port 0xd000-0xd0ff mem 0xdb800000-0xdb8000ff irq 15 at device 9.0 on pci0 > : rl0: Ethernet address: 00:50:ba:d7:8f:74 > : miibus0: on rl0 > : rlphy0: on miibus0 > : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : rl1: port 0xb800-0xb8ff mem 0xdb000000-0xdb0000ff irq 12 at device 10.0 on pci0 > : rl1: Ethernet address: 00:50:ba:d8:80:7c > : miibus1: on rl1 > : rlphy1: on miibus1 > : rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : ahc0: port 0xb400-0xb4ff mem 0xda800000-0xda800fff irq 11 at device 12.0 on pci0 > : aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs > : rl2: port 0xb000-0xb0ff mem 0xda000000-0xda0000ff irq 15 at device 13.0 on pci0 > : rl2: Ethernet address: 00:50:ba:d7:93:ed > : miibus2: on rl2 > : rlphy2: on miibus2 > : rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : pcib1: on motherboard > : pci2: on pcib1 > : atkbdc0: at port 0x60,0x64 on isa0 > : atkbd0: flags 0x1 irq 1 on atkbdc0 > : kbd0 at atkbd0 > : vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > : sc0: at flags 0x100 on isa0 > : sc0: VGA <16 virtual consoles, flags=0x300> > : sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > : sio0: type 16550A > : sio1 at port 0x2f8-0x2ff irq 3 on isa0 > : sio1: type 16550A > : sio2 at port 0x180-0x187 irq 10 flags 0x205 on isa0 > : sio2: type 16550A (multiport master) > : sio3 at port 0x188-0x18f flags 0x205 on isa0 > : sio3: type 16550A (multiport) > : sio4 at port 0x190-0x197 flags 0x205 on isa0 > : sio4: type 16550A (multiport) > : sio5 at port 0x198-0x19f flags 0x205 on isa0 > : sio5: type 16550A (multiport) > : sio6 at port 0x1a0-0x1a7 flags 0x205 on isa0 > : sio6: type 16550A (multiport) > : sio7 at port 0x1a8-0x1af flags 0x205 on isa0 > : sio7: type 16550A (multiport) > : sio8 at port 0x1b0-0x1b7 flags 0x205 on isa0 > : sio8: type 16550A (multiport) > : sio9 at port 0x1b8-0x1bf flags 0x205 on isa0 > : sio9: type 16550A (multiport) > : DUMMYNET initialized (000608) > : IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled > : IP Filter: v3.4.8 initialized. Default = pass all, Logging = disabled > : Waiting 15 seconds for SCSI devices to settle > : Mounting root from ufs:/dev/da0s1a > : da0 at ahc0 bus 0 target 10 lun 0 > : da0: Fixed Direct Access SCSI-3 device > : da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > : da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) b) 5.0-RELEASE, fragment of kernel config file: > # Serial (COM) ports > options COM_MULTIPORT > device sio # 8250, 16[45]50 based serial ports c) 5.0-RELEASE, fragment of /boot/device.hints (ports of multiport card are sio4-sio11): > hint.sio.0.at="isa" > hint.sio.0.port="0x3F8" > hint.sio.0.flags="0x10" > hint.sio.0.irq="4" > hint.sio.1.at="isa" > hint.sio.1.port="0x2F8" > hint.sio.1.irq="3" > hint.sio.2.at="isa" > hint.sio.2.disabled="1" > hint.sio.2.port="0x3E8" > hint.sio.2.irq="5" > hint.sio.3.at="isa" > hint.sio.3.disabled="1" > hint.sio.3.port="0x2E8" > hint.sio.3.irq="9" > hint.sio.4.at="isa" > hint.sio.4.port="0x180" > hint.sio.4.flags="0x405" > hint.sio.4.irq="10" > hint.sio.5.at="isa" > hint.sio.5.port="0x188" > hint.sio.5.flags="0x405" > hint.sio.6.at="isa" > hint.sio.6.port="0x190" > hint.sio.6.flags="0x405" > hint.sio.7.at="isa" > hint.sio.7.port="0x198" > hint.sio.7.flags="0x405" > hint.sio.8.at="isa" > hint.sio.8.port="0x1a0" > hint.sio.8.flags="0x405" > hint.sio.9.at="isa" > hint.sio.9.port="0x1a8" > hint.sio.9.flags="0x405" > hint.sio.10.at="isa" > hint.sio.10.port="0x1b0" > hint.sio.10.flags="0x405" > hint.sio.11.at="isa" > hint.sio.11.port="0x1b8" > hint.sio.11.flags="0x405" d) 5.0-RELEASE, some kernel messages from boot sequence: > : Copyright (c) 1992-2003 The FreeBSD Project. > : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > : The Regents of the University of California. All rights reserved. > : FreeBSD 5.0-RELEASE #1: Sat Mar 1 16:46:31 EET 2003 > : root@gw.osmu.odessa.ua:/usr/src/sys/i386/compile/OSMU > : Preloaded elf kernel "/boot/kernel/kernel" at 0xc044c000. > : Preloaded elf module "/boot/kernel/acpi.ko" at 0xc044c0a8. > : Timecounter "i8254" frequency 1193182 Hz > : Timecounter "TSC" frequency 334504188 Hz > : CPU: Pentium II/Pentium II Xeon/Celeron (334.50-MHz 686-class CPU) > : Origin = "GenuineIntel" Id = 0x650 Stepping = 0 > : Features=0x183f9ff > : real memory = 201310208 (191 MB) > : avail memory = 190881792 (182 MB) > : Initializing GEOMetry subsystem > : Pentium Pro MTRR support enabled > : npx0: on motherboard > : npx0: INT 16 interface > : acpi0: on motherboard > : ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 > : Using $PIR table, 8 entries at 0xc00f0e60 > : acpi0: power button is handled as a fixed feature programming model. > : Timecounter "ACPI-fast" frequency 3579545 Hz > : acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > : acpi_cpu0: on acpi0 > : acpi_button0: on acpi0 > : pcib0: port 0xcf8-0xcff on acpi0 > : pci0: on pcib0 > : agp0: mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 > : pcib1: at device 1.0 on pci0 > : pci1: on pcib1 > : pci1: at device 0.0 (no driver attached) > : isab0: at device 4.0 on pci0 > : isa0: on isab0 > : pci0: at device 4.1 (no driver attached) > : pci0: at device 4.2 (no driver attached) > : pci0: at device 4.3 (no driver attached) > : rl0: port 0xd000-0xd0ff mem 0xdb800000-0xdb8000ff irq 5 at device 9.0 on pci0 > : rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl0: Ethernet address: 00:50:ba:d7:8f:74 > : miibus0: on rl0 > : rlphy0: on miibus0 > : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : rl1: port 0xb800-0xb8ff mem 0xdb000000-0xdb0000ff irq 12 at device 10.0 on pci0 > : rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl1: Ethernet address: 00:50:ba:d8:80:7c > : miibus1: on rl1 > : rlphy1: on miibus1 > : rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : ahc0: port 0xb400-0xb4ff mem 0xda800000-0xda800fff irq 11 at device 12.0 on pci0 > : aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > : rl2: port 0xb000-0xb0ff mem 0xda000000-0xda0000ff irq 5 at device 13.0 on pci0 > : rl2: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl2: Ethernet address: 00:50:ba:d7:93:ed > : miibus2: on rl2 > : rlphy2: on miibus2 > : rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : sio0 port 0x3f8-0x3ff irq 4 on acpi0 > : sio0: type 16550A > : sio1 port 0x2f8-0x2ff irq 3 on acpi0 > : sio1: type 16550A > : atkbdc0: port 0x64,0x60 irq 1 on acpi0 > : atkbd0: flags 0x1 irq 1 on atkbdc0 > : kbd0 at atkbd0 > : orm0: