Date: Mon, 3 Mar 2003 11:35:07 +0200 From: Aleksey Kukhar <tiran@azuritesoft.com> To: freebsd-hardware@freebsd.org Subject: multiport cards' operation problem on 5.0-RELEASE Message-ID: <8038034751.20030303113507@azuritesoft.com>
next in thread | raw e-mail | index | archive | help
Hi. Please advice me. I have computer with ancient isa multiport card in it. A couple of days before we have switched to 5.0-RELEASE from 4.2-RELEASE. Now I am experiencing problems with the multiport card. No hardware settings (including BIOS) were changed. Kernel reports that "sioXX: configured irq 10 not in bitmap of probed irqs 0". Irq 10 is dedicated (BIOS) to legacy ISA devices. Please, help me with this issue. I include some useful information about my system here (a-e): a) 4.2-RELEASE kernel messages (everything is ok): > : Copyright (c) 1992-2000 The FreeBSD Project. > : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > : The Regents of the University of California. All rights reserved. > : FreeBSD 4.2-RELEASE #1: Sat Jun 22 21:17:38 EEST 2002 > : povar@gw.osmu.odessa.ua:/usr/src/sys/compile/OSMU > : Timecounter "i8254" frequency 1193182 Hz > : Timecounter "TSC" frequency 334505198 Hz > : CPU: Pentium II/Pentium II Xeon/Celeron (334.51-MHz 686-class CPU) > : Origin = "GenuineIntel" Id = 0x650 Stepping = 0 > : Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > : real memory = 134201344 (131056K bytes) : config>> q > : avail memory = 127369216 (124384K bytes) > : Preloaded elf kernel "kernel" at 0xc0322000. > : Preloaded userconfig_script "/boot/kernel.conf" at 0xc032209c. > : Pentium Pro MTRR support enabled > : npx0: <math processor> on motherboard > : npx0: INT 16 interface > : pcib0: <Host to PCI bridge> on motherboard > : pci0: <PCI bus> on pcib0 > : pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > : pci1: <PCI bus> on pcib2 > : pci1: <S3 Trio3D/2X graphics accelerator> at 0.0 > : isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0 > : isa0: <ISA bus> on isab0 > : pci0: <VIA Apollo ATA controller> at 4.1 > : pci0: <VIA 83C572 USB controller> at 4.2 irq 15 > : rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xdb800000-0xdb8000ff irq 15 at device 9.0 on pci0 > : rl0: Ethernet address: 00:50:ba:d7:8f:74 > : miibus0: <MII bus> on rl0 > : rlphy0: <RealTek internal media interface> on miibus0 > : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : rl1: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xdb000000-0xdb0000ff irq 12 at device 10.0 on pci0 > : rl1: Ethernet address: 00:50:ba:d8:80:7c > : miibus1: <MII bus> on rl1 > : rlphy1: <RealTek internal media interface> on miibus1 > : rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xda800000-0xda800fff irq 11 at device 12.0 on pci0 > : aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs > : rl2: <RealTek 8139 10/100BaseTX> port 0xb000-0xb0ff mem 0xda000000-0xda0000ff irq 15 at device 13.0 on pci0 > : rl2: Ethernet address: 00:50:ba:d7:93:ed > : miibus2: <MII bus> on rl2 > : rlphy2: <RealTek internal media interface> on miibus2 > : rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : pcib1: <Host to PCI bridge> on motherboard > : pci2: <PCI bus> on pcib1 > : atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > : atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > : kbd0 at atkbd0 > : vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > : sc0: <System console> at flags 0x100 on isa0 > : sc0: VGA <16 virtual consoles, flags=0x300> > : sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > : sio0: type 16550A > : sio1 at port 0x2f8-0x2ff irq 3 on isa0 > : sio1: type 16550A > : sio2 at port 0x180-0x187 irq 10 flags 0x205 on isa0 > : sio2: type 16550A (multiport master) > : sio3 at port 0x188-0x18f flags 0x205 on isa0 > : sio3: type 16550A (multiport) > : sio4 at port 0x190-0x197 flags 0x205 on isa0 > : sio4: type 16550A (multiport) > : sio5 at port 0x198-0x19f flags 0x205 on isa0 > : sio5: type 16550A (multiport) > : sio6 at port 0x1a0-0x1a7 flags 0x205 on isa0 > : sio6: type 16550A (multiport) > : sio7 at port 0x1a8-0x1af flags 0x205 on isa0 > : sio7: type 16550A (multiport) > : sio8 at port 0x1b0-0x1b7 flags 0x205 on isa0 > : sio8: type 16550A (multiport) > : sio9 at port 0x1b8-0x1bf flags 0x205 on isa0 > : sio9: type 16550A (multiport) > : DUMMYNET initialized (000608) > : IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled > : IP Filter: v3.4.8 initialized. Default = pass all, Logging = disabled > : Waiting 15 seconds for SCSI devices to settle > : Mounting root from ufs:/dev/da0s1a > : da0 at ahc0 bus 0 target 10 lun 0 > : da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device > : da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > : da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) b) 5.0-RELEASE, fragment of kernel config file: > # Serial (COM) ports > options COM_MULTIPORT > device sio # 8250, 16[45]50 based serial ports c) 5.0-RELEASE, fragment of /boot/device.hints (ports of multiport card are sio4-sio11): > hint.sio.0.at="isa" > hint.sio.0.port="0x3F8" > hint.sio.0.flags="0x10" > hint.sio.0.irq="4" > hint.sio.1.at="isa" > hint.sio.1.port="0x2F8" > hint.sio.1.irq="3" > hint.sio.2.at="isa" > hint.sio.2.disabled="1" > hint.sio.2.port="0x3E8" > hint.sio.2.irq="5" > hint.sio.3.at="isa" > hint.sio.3.disabled="1" > hint.sio.3.port="0x2E8" > hint.sio.3.irq="9" > hint.sio.4.at="isa" > hint.sio.4.port="0x180" > hint.sio.4.flags="0x405" > hint.sio.4.irq="10" > hint.sio.5.at="isa" > hint.sio.5.port="0x188" > hint.sio.5.flags="0x405" > hint.sio.6.at="isa" > hint.sio.6.port="0x190" > hint.sio.6.flags="0x405" > hint.sio.7.at="isa" > hint.sio.7.port="0x198" > hint.sio.7.flags="0x405" > hint.sio.8.at="isa" > hint.sio.8.port="0x1a0" > hint.sio.8.flags="0x405" > hint.sio.9.at="isa" > hint.sio.9.port="0x1a8" > hint.sio.9.flags="0x405" > hint.sio.10.at="isa" > hint.sio.10.port="0x1b0" > hint.sio.10.flags="0x405" > hint.sio.11.at="isa" > hint.sio.11.port="0x1b8" > hint.sio.11.flags="0x405" d) 5.0-RELEASE, some kernel messages from boot sequence: > : Copyright (c) 1992-2003 The FreeBSD Project. > : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > : The Regents of the University of California. All rights reserved. > : FreeBSD 5.0-RELEASE #1: Sat Mar 1 16:46:31 EET 2003 > : root@gw.osmu.odessa.ua:/usr/src/sys/i386/compile/OSMU > : Preloaded elf kernel "/boot/kernel/kernel" at 0xc044c000. > : Preloaded elf module "/boot/kernel/acpi.ko" at 0xc044c0a8. > : Timecounter "i8254" frequency 1193182 Hz > : Timecounter "TSC" frequency 334504188 Hz > : CPU: Pentium II/Pentium II Xeon/Celeron (334.50-MHz 686-class CPU) > : Origin = "GenuineIntel" Id = 0x650 Stepping = 0 > : Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > : real memory = 201310208 (191 MB) > : avail memory = 190881792 (182 MB) > : Initializing GEOMetry subsystem > : Pentium Pro MTRR support enabled > : npx0: <math processor> on motherboard > : npx0: INT 16 interface > : acpi0: <ASUS P3V_4X > on motherboard > : ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 > : Using $PIR table, 8 entries at 0xc00f0e60 > : acpi0: power button is handled as a fixed feature programming model. > : Timecounter "ACPI-fast" frequency 3579545 Hz > : acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > : acpi_cpu0: <CPU> on acpi0 > : acpi_button0: <Power Button> on acpi0 > : pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > : pci0: <ACPI PCI bus> on pcib0 > : agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 > : pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > : pci1: <PCI bus> on pcib1 > : pci1: <display, VGA> at device 0.0 (no driver attached) > : isab0: <PCI-ISA bridge> at device 4.0 on pci0 > : isa0: <ISA bus> on isab0 > : pci0: <mass storage, ATA> at device 4.1 (no driver attached) > : pci0: <serial bus, USB> at device 4.2 (no driver attached) > : pci0: <bridge, HOST-PCI> at device 4.3 (no driver attached) > : rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xdb800000-0xdb8000ff irq 5 at device 9.0 on pci0 > : rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl0: Ethernet address: 00:50:ba:d7:8f:74 > : miibus0: <MII bus> on rl0 > : rlphy0: <RealTek internal media interface> on miibus0 > : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : rl1: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xdb000000-0xdb0000ff irq 12 at device 10.0 on pci0 > : rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl1: Ethernet address: 00:50:ba:d8:80:7c > : miibus1: <MII bus> on rl1 > : rlphy1: <RealTek internal media interface> on miibus1 > : rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xda800000-0xda800fff irq 11 at device 12.0 on pci0 > : aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > : rl2: <RealTek 8139 10/100BaseTX> port 0xb000-0xb0ff mem 0xda000000-0xda0000ff irq 5 at device 13.0 on pci0 > : rl2: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > : rl2: Ethernet address: 00:50:ba:d7:93:ed > : miibus2: <MII bus> on rl2 > : rlphy2: <RealTek internal media interface> on miibus2 > : rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > : sio0 port 0x3f8-0x3ff irq 4 on acpi0 > : sio0: type 16550A > : sio1 port 0x2f8-0x2ff irq 3 on acpi0 > : sio1: type 16550A > : atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > : atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > : kbd0 at atkbd0 > : orm0: <Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0 > : sc0: <System console> on isa0 > : sc0: VGA <16 virtual consoles, flags=0x200> > : vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > : sio10: configured irq 10 not in bitmap of probed irqs 0 > : sio10: port may not be enabled > : sio10 at port 0x1b0-0x1b7 flags 0x405 on isa0 > : sio10: type 16550A (multiport) > : sio11: configured irq 10 not in bitmap of probed irqs 0 > : sio11: port may not be enabled > : sio11 at port 0x1b8-0x1bf flags 0x405 on isa0 > : sio11: type 16550A (multiport) > : sio4: configured irq 10 not in bitmap of probed irqs 0 > : sio4: port may not be enabled > : sio4 at port 0x180-0x187 irq 10 flags 0x405 on isa0 > : sio4: type 16550A (multiport master) > : sio5: configured irq 10 not in bitmap of probed irqs 0 > : sio5: port may not be enabled > : sio5 at port 0x188-0x18f flags 0x405 on isa0 > : sio5: type 16550A (multiport) > : sio6: configured irq 10 not in bitmap of probed irqs 0 > : sio6: port may not be enabled > : sio6 at port 0x190-0x197 flags 0x405 on isa0 > : sio6: type 16550A (multiport) > : sio7: configured irq 10 not in bitmap of probed irqs 0 > : sio7: port may not be enabled > : sio7 at port 0x198-0x19f flags 0x405 on isa0 > : sio7: type 16550A (multiport) > : sio8: configured irq 10 not in bitmap of probed irqs 0 > : sio8: port may not be enabled > : sio8 at port 0x1a0-0x1a7 flags 0x405 on isa0 > : sio8: type 16550A (multiport) > : sio9: configured irq 10 not in bitmap of probed irqs 0 > : sio9: port may not be enabled > : sio9 at port 0x1a8-0x1af flags 0x405 on isa0 > : sio9: type 16550A (multiport) > : Timecounters tick every 10.000 msec > : DUMMYNET initialized (011031) > : ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled > : IP Filter: v3.4.29 initialized. Default = pass all, Logging = disabled > : Waiting 15 seconds for SCSI devices to settle > : acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% > : da0 at ahc0 bus 0 target 6 lun 0 > : da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device > : da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > : da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) > : da1 at ahc0 bus 0 target 10 lun 0 > : da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device > : da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > : da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) e) 5.0-RELEASE, pciconf output > agp0@pci0:0:0: class=0x060000 card=0x80171043 chip=0x06911106 rev=0xc4 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82C691/693A/694X Apollo Pro/133/133A System Controller' > class = bridge > subclass = HOST-PCI > pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0x85981106 rev=0x00 hdr=0x01 > vendor = 'VIA Technologies Inc' > device = 'VT82C598MVP/694x Apollo MVP3/Pro133x PCI to AGP Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:4:0: class=0x060100 card=0x80171043 chip=0x05961106 rev=0x23 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82C596/A/B "Mobile South" PCI to ISA Bridge' > class = bridge > subclass = PCI-ISA > none0@pci0:4:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x10 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' > class = mass storage > subclass = ATA > none1@pci0:4:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x11 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' > class = serial bus > subclass = USB > none2@pci0:4:3: class=0x060000 card=0x00000000 chip=0x30501106 rev=0x30 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82C596/596A/596 Power Management and SMBus Controller' > class = bridge > subclass = HOST-PCI > rl0@pci0:9:0: class=0x020000 card=0x13001186 chip=0x813910ec rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' > class = network > subclass = ethernet > rl1@pci0:10:0: class=0x020000 card=0x13001186 chip=0x813910ec rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' > class = network > subclass = ethernet > ahc0@pci0:12:0: class=0x010000 card=0x00000000 chip=0x81789004 rev=0x00 hdr=0x00 > vendor = 'Adaptec Inc' > device = 'AHA-2940U/UW/2940D Ultra/Ultra Wide/Dual SCSI Host Adapter' > class = mass storage > subclass = SCSI > rl2@pci0:13:0: class=0x020000 card=0x13001186 chip=0x813910ec rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' > class = network > subclass = ethernet > none3@pci1:0:0: class=0x030000 card=0x8a135333 chip=0x8a135333 rev=0x02 hdr=0x00 > vendor = 'S3 Incorporated' > device = '86C362/86C368 Trio3D2x & Trio3D2x+ AGP' > class = display > subclass = VGA -- Best regards, Aleksey Kukhar To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8038034751.20030303113507>