Date: Tue, 3 Jul 2012 23:26:56 +0200 From: =?ISO-8859-1?Q?=C9meric_Maschino?= <emeric.maschino@gmail.com> To: Marcel Moolenaar <marcel@xcllnt.net> Cc: freebsd-ia64@freebsd.org Subject: Re: Installing on zx6000 Message-ID: <CAA9xbM5WC3V=FtEbtjGwPjf19u%2B1eQ9kgwAFFt_8ZG2u=60gNQ@mail.gmail.com> In-Reply-To: <97D695A7-DAE0-4054-8958-1F4DB0EBDCEC@xcllnt.net> References: <4FE38863.9020303@wizardlike.ca> <1817B805-693A-4635-9506-EBD8F90C1166@xcllnt.net> <20120702124138.GB36368@mech-cluster241.men.bris.ac.uk> <14CF4E3A-17A4-466D-A1BB-A080616B35DD@xcllnt.net> <20120703112755.GA39761@mech-cluster241.men.bris.ac.uk> <97D695A7-DAE0-4054-8958-1F4DB0EBDCEC@xcllnt.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello,
2012/7/3 Marcel Moolenaar <marcel@xcllnt.net>:
>
> On Jul 3, 2012, at 4:27 AM, Anton Shterenlikht wrote:
>
>>>> uhub1: 2 ports with 2 removable, self powered
>>>> uhub0: 3 ports with 3 removable, self powered
>>>> uhub2: 5 ports with 5 removable, self powered
>>>> da0 at mpt0 bus 0 scbus1 target 0 lun 0
>>>> ***********************************************************
>>>> * ROM Version : 02.31
>>>> * ROM Date : 03/11/2004
>>>> * BMC Version : 01.53
>>>> ***********************************************************
>>>
>>> This one could be related to the USB stack. If it is, then it
>>> means you have a CD in the DVD drive and all you need to do
>>> is eject the disc. If you don't have a disc in the CD drive
So, from Marcel's explanation and looking at the boot.log file that I
posted on June 29th, I seem to have the USB issue too.
>> I'm not sure I can take the CD out before
>> the boot is complete, can I?
I tried. It didn't work:
FreeBSD/ia64 EFI boot, Revision 3.1
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xfef1f0+0x82710 syms=[0x8+0xb1120+0x8+0xa62a9]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
efipart_readwrite: rw=1, status=9223372036854775820
7 0 0x00006B 0x0000000000000018 unexpected trap
7 0 0x000066 0x0000000000000018 trap taken, number in ext PE
7 0 0x00003C 0x0000000000005400 trap taken, offset in ext PE
> You should be able to. As an experiment, try to boot verbose
> (this prints a lot more stuff and may impact timing) or boot
> with -a. -a tells the kernel to ask for the root mount and
> can also introduce a "breather". At the rootmount prompt,
> type "dot" with enter to have the kernel work for a second.
> Do this until you have /dev/cd0.
boot -a didn't help. Please have a look at the attached ask.log file.
BTW, I was never asked to enter the root mount...
boot -v didn't help either. I've attached the corresponding
verbose.log file if it can help further.
Best regards,
Emeric
[-- Attachment #2 --]
Entering /boot/kernel/kernel at 0x9ffc000000010500...
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 23:45:36 UTC 2012
marcel@eris.freebsd.org:/usr/obj/usr/src/sys/GENERIC ia64
CPU: Madison (1500 Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 5
Features = 0x1<LB>
real memory = 25712648192 (24521 MB)
avail memory = 25190416384 (24023 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000040ffe62050
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: ACPI Id=0, SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: ACPI Id=1, SAPIC Id=1, SAPIC Eid=0
Event timer "ITC" frequency 1500000000 Hz quality 1000
ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20110527/tbfadt-556)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20110527/tbfadt-556)
acpi0: <HP> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5c1004-0xff5c1007 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
ohci0: <NEC uPD 9210 USB controller> mem 0x80023000-0x80023fff irq 16 at device
1.0 on pci0
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80022000-0x80022fff irq 17 at device
1.1 on pci0
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80021000-0x800210ff irq 18 at d
evice 1.2 on pci0
usbus2: EHCI version 0.95
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
atapci0: <SiI (CMD) 649 UDMA100 controller> port 0xd58-0xd5f,0xd64-0xd67,0xd50-0
xd57,0xd60-0xd63,0xd40-0xd4f irq 21 at device 2.0 on pci0
atapci0: HW has secondary channel disabled
ata2: <ATA channel 0> on atapci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd00-0xd3f mem 0x80020000-0x80020fff,
0x80000000-0x8001ffff irq 20 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:30:6e:4a:d3:ab
pcib1: <ACPI Host-PCI bridge> on acpi0
pci32: <ACPI PCI bus> on pcib1
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2100-0x21ff mem 0x90840000-0x9084fff
f,0x90830000-0x9083ffff irq 27 at device 1.0 on pci32
mpt0: MPI Version=1.2.12.0
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0x90820000-0x9082fff
f,0x90810000-0x9081ffff irq 28 at device 1.1 on pci32
mpt1: MPI Version=1.2.12.0
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x000105> mem 0
x90800000-0x9080ffff irq 29 at device 2.0 on pci32
bge0: CHIP ID 0x00000105; ASIC REV 0x00; CHIP REV 0x01; PCI
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 1000BASE-T media interface> PHY 1 on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-m
aster, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:30:6e:4a:d2:bd
pcib2: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib2
pci64: <multimedia, audio> at device 1.0 (no driver attached)
pci64: <input device> at device 1.1 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci96: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0x8000-0x80ff mem 0xd0000000-0xd7ffffff,0
xd8030000-0xd803ffff at device 0.0 on pci128
vgapci1: <VGA-compatible display> mem 0xc8000000-0xcfffffff,0xd8020000-0xd802fff
f at device 0.1 on pci128
pcib5: <ACPI Host-PCI bridge> on acpi0
pci192: <ACPI PCI bus> on pcib5
uart0: <16550 or compatible> iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0
Timecounters tick every 1.000 msec
fxp0: link state changed to DOWN
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Microsoft Wheel Mouse Optical, class 0/0, rev 1.10/1.21, addr 2
> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen1.2: <CHICONY> at usbus1
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbu
s1
da0 at mpt0 bus 0 scbus1 target 0 lun 0
[-- Attachment #3 --]
Entering /boot/kernel/kernel at 0x9ffc000000010500...
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
VHPT: address=0xe000000000200000, size=0x100000
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 23:45:36 UTC 2012
marcel@eris.freebsd.org:/usr/obj/usr/src/sys/GENERIC ia64
UNWIND: table added: base=9ffc000000000000, start=9ffc000000ddff00, end=9ffc0000
00e2da08
Preloaded elf kernel "/boot/kernel/kernel" at 0x9ffc0000011c8ce0.
CPU: Madison (1500 Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 5
Features = 0x1<LB>
real memory = 25712640000 (24521 MB)
Physical memory chunk(s):
0x00480000 - 0x01ffffff, 28835840 bytes (3520 pages)
0x04000000 - 0x3f5e3fff, 996032512 bytes (121586 pages)
0x3fb00000 - 0x3fb05fff, 24576 bytes (3 pages)
0x100000000 - 0x5e8063fff, 21072592896 bytes (2572338 pages)
0x4040000000 - 0x40fed6dfff, 3201753088 bytes (390839 pages)
0x40ff000000 - 0x40ff2c9fff, 2924544 bytes (357 pages)
0x40ffa00000 - 0x40ffd69fff, 3579904 bytes (437 pages)
0x40ffe00000 - 0x40ffe11fff, 73728 bytes (9 pages)
0x40ffe80000 - 0x40fffc1fff, 1318912 bytes (161 pages)
avail memory = 25190408192 (24023 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000040ffe62050
Table 'FACP' at 0xe00000003fb36800
Table 'SPCR' at 0xe00000003fb36938
Table 'DBGP' at 0xe00000003fb36988
Table 'APIC' at 0xe00000003fb36a48
Local APIC address=0xfee00000
Local APIC override entry
Local APIC address=0xfee00000
Local SAPIC entry
ProcessorId=0x0, Id=0x0, Eid=0x0
Local SAPIC entry
ProcessorId=0x1, Id=0x1, Eid=0x0
I/O SAPIC entry
Id=0x0, InterruptBase=0x10, Address=0xfed20800
I/O SAPIC entry
Id=0x1, InterruptBase=0x1b, Address=0xfed22800
I/O SAPIC entry
Id=0x2, InterruptBase=0x26, Address=0xfed24800
I/O SAPIC entry
Id=0x3, InterruptBase=0x31, Address=0xfed26800
I/O SAPIC entry
Id=0x4, InterruptBase=0x3c, Address=0xfed28800
I/O SAPIC entry
Id=0x6, InterruptBase=0x47, Address=0xfed2c800
Table 'SPMI' at 0xe00000003fb369c0
Table 'CPEP' at 0xe00000003fb36a10
Table 'SSDT' at 0xe00000003fb33870
Table 'SSDT' at 0xe00000003fb33a50
Table 'SSDT' at 0xe00000003fb33da0
Table 'SSDT' at 0xe00000003fb347c0
Table 'SSDT' at 0xe00000003fb351e0
Table 'SSDT' at 0xe00000003fb35c00
Table 'SSDT' at 0xe00000003fb36620
Table 'SSDT' at 0xe00000003fb36710
MCA: allocated 40960 bytes for state info.
XIV 144: use=2, IH=0x9ffc000000eed390
SMP: waking up cpu1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: ACPI Id=0, SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: ACPI Id=1, SAPIC Id=1, SAPIC Eid=0
ULE: setup cpu 0
ULE: setup cpu 1
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
XIV 240: use=3, IH=0x9ffc000000ee98f0
Event timer "ITC" frequency 1500000000 Hz quality 1000
ACPI: RSDP 0x3fb2e000 00028 (v02 HP)
ACPI: XSDT 0x3fb2e02c 00094 (v01 HP zx6000 00000000 HP 00000000)
ACPI: FACP 0x3fb36800 000F4 (v03 HP zx6000 00000000 HP 00000000)
ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20110527/tbfadt-556)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20110527/tbfadt-556)
ACPI: DSDT 0x3fb2e0e0 05781 (v01 HP zx6000 00000007 INTL 02012044)
ACPI: FACS 0x3fb368f8 00040
ACPI: SPCR 0x3fb36938 00050 (v01 HP zx6000 00000000 HP 00000000)
ACPI: DBGP 0x3fb36988 00034 (v01 HP zx6000 00000000 HP 00000000)
ACPI: APIC 0x3fb36a48 000B0 (v01 HP zx6000 00000000 HP 00000000)
ACPI: SPMI 0x3fb369c0 00050 (v04 HP zx6000 00000000 HP 00000000)
ACPI: CPEP 0x3fb36a10 00034 (v01 HP zx6000 00000000 HP 00000000)
ACPI: SSDT 0x3fb33870 001D6 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb33a50 00342 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb33da0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb347c0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb351e0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb35c00 00A16 (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb36620 000EB (v01 HP zx6000 00000006 INTL 02012044)
ACPI: SSDT 0x3fb36710 000EF (v01 HP zx6000 00000006 INTL 02012044)
nexus0: registered as a time-of-day clock (resolution 1000us, adjustment 0.00050
0000s)
acpi0: <HP> on motherboard
XIV 160: use=4, IH=0x9ffc000000eea400
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
ACPI timer: 0/37 0/9 1/1 0/11 0/5 1/3 1/1 1/3 1/1 1/3 -> 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5c1004-0xff5c1007 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0x1fff
pcib0: decoding 3 range 0x80000000-0x8fffffff
pcib0: decoding 3 range 0x80004000000-0x80103fffffe
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1033, dev=0x0035, revid=0x41
domain=0, bus=0, slot=1, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80023000, size 12, enabled
pcib0: allocated type 3 (0x80023000-0x80023fff) for rid 10 of pci0:0:1:0
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x1033, dev=0x0035, revid=0x41
domain=0, bus=0, slot=1, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80022000, size 12, enabled
pcib0: allocated type 3 (0x80022000-0x80022fff) for rid 10 of pci0:0:1:1
pcib0: matched entry for 0.1.INTB
pcib0: slot 1 INTB hardwired to IRQ 17
found-> vendor=0x1033, dev=0x00e0, revid=0x02
domain=0, bus=0, slot=1, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0210, cachelnsz=32 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80021000, size 8, enabled
pcib0: allocated type 3 (0x80021000-0x800210ff) for rid 10 of pci0:0:1:2
pcib0: matched entry for 0.1.INTC
pcib0: slot 1 INTC hardwired to IRQ 18
found-> vendor=0x1095, dev=0x0649, revid=0x02
domain=0, bus=0, slot=2, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=14
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd58, size 3, enabled
pcib0: allocated type 4 (0xd58-0xd5f) for rid 10 of pci0:0:2:0
map[14]: type I/O Port, range 32, base 0xd64, size 2, enabled
pcib0: allocated type 4 (0xd64-0xd67) for rid 14 of pci0:0:2:0
map[18]: type I/O Port, range 32, base 0xd50, size 3, enabled
pcib0: allocated type 4 (0xd50-0xd57) for rid 18 of pci0:0:2:0
map[1c]: type I/O Port, range 32, base 0xd60, size 2, enabled
pcib0: allocated type 4 (0xd60-0xd63) for rid 1c of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xd40, size 4, enabled
pcib0: allocated type 4 (0xd40-0xd4f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x1229, revid=0x0d
domain=0, bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0x80020000, size 12, enabled
pcib0: allocated type 3 (0x80020000-0x80020fff) for rid 10 of pci0:0:3:0
map[14]: type I/O Port, range 32, base 0xd00, size 6, enabled
pcib0: allocated type 4 (0xd00-0xd3f) for rid 14 of pci0:0:3:0
map[18]: type Memory, range 32, base 0x80000000, size 17, enabled
pcib0: allocated type 3 (0x80000000-0x8001ffff) for rid 18 of pci0:0:3:0
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
ohci0: <NEC uPD 9210 USB controller> mem 0x80023000-0x80023fff irq 16 at device
1.0 on pci0
XIV 192: use=4, IH=0x9ffc000000eea400
usbus0: <NEC uPD 9210 USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ohci1: <NEC uPD 9210 USB controller> mem 0x80022000-0x80022fff irq 17 at device
1.1 on pci0
XIV 193: use=4, IH=0x9ffc000000eea400
usbus1: <NEC uPD 9210 USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf: Attached
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80021000-0x800210ff irq 18 at d
evice 1.2 on pci0
XIV 194: use=4, IH=0x9ffc000000eea400
usbus2: EHCI version 0.95
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usbus2: bpf attached
ehci0: usbpf: Attached
atapci0: <SiI (CMD) 649 UDMA100 controller> port 0xd58-0xd5f,0xd64-0xd67,0xd50-0
xd57,0xd60-0xd63,0xd40-0xd4f irq 21 at device 2.0 on pci0
XIV 195: use=4, IH=0x9ffc000000eea400
atapci0: HW has secondary channel disabled
ata2: <ATA channel 0> on atapci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd00-0xd3f mem 0x80020000-0x80020fff,
0x80000000-0x8001ffff irq 20 at device 3.0 on pci0
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 103c 1274 000d
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: OUI 0x005500, model 0x0015, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: bpf attached
fxp0: Ethernet address: 00:30:6e:4a:d3:ab
XIV 208: use=4, IH=0x9ffc000000eea400
pcib1: <ACPI Host-PCI bridge> on acpi0
pcib1: decoding 3 range 0xff5e0000-0xff5e0007
pcib1: decoding 3 range 0xff5e2000-0xff5e2007
pcib1: decoding 4 range 0x2000-0x2fff
pcib1: decoding 3 range 0x90000000-0x97ffffff
pcib1: decoding 3 range 0x90004000000-0x90103fffffe
pci32: <ACPI PCI bus> on pcib1
pci32: domain=0, physical bus=32
found-> vendor=0x1000, dev=0x0030, revid=0x07
domain=0, bus=32, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0x2100, size 8, enabled
pcib1: allocated type 4 (0x2100-0x21ff) for rid 10 of pci0:32:1:0
map[14]: type Memory, range 64, base 0x90840000, size 16, enabled
pcib1: allocated type 3 (0x90840000-0x9084ffff) for rid 14 of pci0:32:1:0
map[1c]: type Memory, range 64, base 0x90830000, size 16, enabled
pcib1: allocated type 3 (0x90830000-0x9083ffff) for rid 1c of pci0:32:1:0
pcib1: matched entry for 32.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 27
found-> vendor=0x1000, dev=0x0030, revid=0x07
domain=0, bus=32, slot=1, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=b, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib1: allocated type 4 (0x2000-0x20ff) for rid 10 of pci0:32:1:1
map[14]: type Memory, range 64, base 0x90820000, size 16, enabled
pcib1: allocated type 3 (0x90820000-0x9082ffff) for rid 14 of pci0:32:1:1
map[1c]: type Memory, range 64, base 0x90810000, size 16, enabled
pcib1: allocated type 3 (0x90810000-0x9081ffff) for rid 1c of pci0:32:1:1
pcib1: matched entry for 32.1.INTB
pcib1: slot 1 INTB hardwired to IRQ 28
found-> vendor=0x14e4, dev=0x1645, revid=0x15
domain=0, bus=32, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=29
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0x90800000, size 16, enabled
pcib1: allocated type 3 (0x90800000-0x9080ffff) for rid 10 of pci0:32:2:0
pcib1: matched entry for 32.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 29
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2100-0x21ff mem 0x90840000-0x9084fff
f,0x90830000-0x9083ffff irq 27 at device 1.0 on pci32
XIV 196: use=4, IH=0x9ffc000000eea400
mpt0: MPI Version=1.2.12.0
mpt0: chain depth limited to 48 (from 2550)
mpt0: Maximum Segment Count: 336, Maximum CAM Segment Count: 17
mpt0: MsgLength=15 IOCNumber = 0
mpt0: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes
Max Chain Depth 48
mpt0: IOCFACTS: Num Ports 1, FWImageSize 40048, Flags=0x1
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0x90820000-0x9082fff
f,0x90810000-0x9081ffff irq 28 at device 1.1 on pci32
XIV 197: use=4, IH=0x9ffc000000eea400
mpt1: MPI Version=1.2.12.0
mpt1: chain depth limited to 48 (from 2550)
mpt1: Maximum Segment Count: 336, Maximum CAM Segment Count: 17
mpt1: MsgLength=15 IOCNumber = 1
mpt1: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes
Max Chain Depth 48
mpt1: IOCFACTS: Num Ports 1, FWImageSize 40048, Flags=0x1
mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pci0:32:2:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x000105> mem 0
x90800000-0x9080ffff irq 29 at device 2.0 on pci32
bge0: CHIP ID 0x00000105; ASIC REV 0x00; CHIP REV 0x01; PCI
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 1000BASE-T media interface> PHY 1 on miibus1
brgphy0: OUI 0x001018, model 0x0011, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-m
aster, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:30:6e:4a:d2:bd
XIV 209: use=4, IH=0x9ffc000000eea400
pcib2: <ACPI Host-PCI bridge> on acpi0
pcib2: decoding 4 range 0x3000-0x5fff
pcib2: decoding 3 range 0x98000000-0xafffffff
pcib2: decoding 3 range 0xa0004000000-0xa0103fffffe
pci64: <ACPI PCI bus> on pcib2
pci64: domain=0, physical bus=64
found-> vendor=0x1319, dev=0x0801, revid=0xb2
domain=0, bus=64, slot=1, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=0
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x3000, size 7, enabled
pcib2: allocated type 4 (0x3000-0x307f) for rid 10 of pci0:64:1:0
pcib2: matched entry for 64.1.INTA
pcib2: slot 1 INTA hardwired to IRQ 38
found-> vendor=0x1319, dev=0x0802, revid=0xb2
domain=0, bus=64, slot=1, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns)
powerspec 1 supports D0 D1 D3 current D0
map[10]: type I/O Port, range 32, base 0x3080, size 4, enabled
pcib2: allocated type 4 (0x3080-0x308f) for rid 10 of pci0:64:1:1
pci64: <multimedia, audio> at device 1.0 (no driver attached)
pci64: <input device> at device 1.1 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pcib3: decoding 4 range 0x6000-0x7fff
pcib3: decoding 3 range 0xb0000000-0xc7ffffff
pcib3: decoding 3 range 0xb0004000000-0xb0103fffffe
pci96: <ACPI PCI bus> on pcib3
pci96: domain=0, physical bus=96
pcib4: <ACPI Host-PCI bridge> on acpi0
pcib4: decoding 4 range 0x3b0-0x3df
pcib4: decoding 4 range 0x8000-0xbfff
pcib4: decoding 3 range 0xa0000-0xfffff
pcib4: decoding 3 range 0xc8000000-0xdfffffff
pcib4: decoding 3 range 0xc0004000000-0xc0103fffffe
pci128: <ACPI PCI bus> on pcib4
pci128: domain=0, physical bus=128
found-> vendor=0x1002, dev=0x4e47, revid=0x80
domain=0, bus=128, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0187, statreg=0x02b0, cachelnsz=32 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, e
nabled
pcib4: allocated type 3 (0xd0000000-0xd7ffffff) for rid 10 of pci0:128:0:0
map[14]: type I/O Port, range 32, base 0x8000, size 8, enabled
pcib4: allocated type 4 (0x8000-0x80ff) for rid 14 of pci0:128:0:0
map[18]: type Memory, range 32, base 0xd8030000, size 16, enabled
pcib4: allocated type 3 (0xd8030000-0xd803ffff) for rid 18 of pci0:128:0:0
found-> vendor=0x1002, dev=0x4e67, revid=0x80
domain=0, bus=128, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0086, statreg=0x02b0, cachelnsz=32 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xc8000000, size 27, e
nabled
pcib4: allocated type 3 (0xc8000000-0xcfffffff) for rid 10 of pci0:128:0:1
map[14]: type Memory, range 32, base 0xd8020000, size 16, enabled
pcib4: allocated type 3 (0xd8020000-0xd802ffff) for rid 14 of pci0:128:0:1
vgapci0: <VGA-compatible display> port 0x8000-0x80ff mem 0xd0000000-0xd7ffffff,0
xd8030000-0xd803ffff at device 0.0 on pci128
vgapci1: <VGA-compatible display> mem 0xc8000000-0xcfffffff,0xd8020000-0xd802fff
f at device 0.1 on pci128
pcib5: <ACPI Host-PCI bridge> on acpi0
pcib5: decoding 4 range 0xc000-0xdfff
pcib5: decoding 3 range 0xe0000000-0xefffffff
pcib5: decoding 3 range 0xe0004000000-0xe0103fffffe
pci192: <ACPI PCI bus> on pcib5
pci192: domain=0, physical bus=192
uart0: <16550 or compatible> iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0
XIV 176: use=4, IH=0x9ffc000000eea400
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0
XIV 177: use=4, IH=0x9ffc000000eea400
uart1: fast interrupt
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
fxp0: link state changed to DOWN
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ata2: reset tp1 mask=03 ostat0=50 ostat1=01
ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata2: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
ata2: reset tp2 stat0=00 stat1=01 devices=0x10000
(noperiph:mpt0:0:-1:-1): reset bus
(noperiph:mpt1:0:-1:-1): reset bus
(aprobe0:ata2:0:0:0): SIGNATURE: eb14
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
(probe0:mpt0:0:0:0): SCSI status error
(probe0:mpt0:0:0:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(probe0:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurre
d)
(probe0:mpt0:0:0:0): Field Replaceable Unit: 2
(probe0:mpt0:0:0:0): Retrying command (per sense data)
uhub2: 5 ports with 5 removable, self powered
(probe0:mpt0:0:1:0): SCSI status error
(probe0:mpt0:0:1:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe0:mpt0:0:1:0): CAM status: SCSI Status Error
(probe0:mpt0:0:1:0): SCSI status: Check Condition
(probe0:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurre
d)
(probe0:mpt0:0:1:0): Field Replaceable Unit: 2
(probe0:mpt0:0:1:0): Retrying command (per sense data)
(probe1:mpt1:0:2:0): SCSI status error
(probe1:mpt1:0:2:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0
(probe1:mpt1:0:2:0): CAM status: SCSI Status Error
(probe1:mpt1:0:2:0): SCSI status: Check Condition
(probe1:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurre
d)
(probe1:mpt1:0:2:0): Field Replaceable Unit: 2
(probe1:mpt1:0:2:0): Retrying command (per sense data)
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Microsoft Wheel Mouse Optical, class 0/0, rev 1.10/1.21, addr 2
> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen1.2: <CHICONY> at usbus1
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbu
s1
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
pass0 at ata2 bus 0 scbus0 target 0 lun 0
pass0: <TEAC DV-28E-B 2.2B> Removable CD-ROM SCSI-0 device
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass1 at mpt0 bus 0 scbus1 target 0 lun 0
pass1: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3HW2GKRX00007521UKCV
pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
pass1: Command Queueing enabled
pass2 at mpt0 bus 0 scbus1 target 1 lun 0
pass2: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
pass2: Serial Number 3HW2G10700007521F0GP
pass2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
pass2: Command Queueing enabled
pass3 at mpt1 bus 0 scbus2 target 2 lun 0
pass3: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
pass3: Serial Number 3HW1LSK80000750183DQ
pass3: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
pass3: Command Queueing enabled
da0 at mpt0 bus 0 scbus1 target 0 lun 0
da0: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
da0: Serial Number 3HW2GKRX00007521UKCV
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
da0: Command Queueing enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 scbus1 target 1 lun 0
da1: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
da1: Serial Number 3HW2G10700007521F0GP
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
da1: Command Queueing enabled
da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da2 at mpt1 bus 0 scbus2 target 2 lun 0
da2: <HP 73.4G ST373453LC HPC5> Fixed Direct Access SCSI-3 device
da2: Serial Number 3HW1LSK80000750183DQ
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
da2: Command Queueing enabled
da2: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <TEAC DV-28E-B 2.2B> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [156656 x 2048 byte records]
XIV 161: use=3, IH=0x9ffc000000eee530
XIV 241: use=3, IH=0x9ffc000000eee550
XIV 224: use=3, IH=0x9ffc000000eee560
XIV 145: use=3, IH=0x9ffc000000eee570
XIV 225: use=3, IH=0x9ffc000000eee580
XIV 242: use=3, IH=0x9ffc000000eee590
XIV 2: use=3, IH=0x9ffc000000eee590
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk cd0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAA9xbM5WC3V=FtEbtjGwPjf19u%2B1eQ9kgwAFFt_8ZG2u=60gNQ>