Date: Tue, 21 Jan 2003 22:19:19 +0000 From: Trent Nelson <trent@limekiln.vcisp.net> To: freebsd-current@FreeBSD.ORG Cc: tnelson@switch.com, nate@root.org Subject: Re: System freeze running -current Message-ID: <20030121221919.GB14964@limekiln.vcisp.net> In-Reply-To: <20030103151234.GA21140@arpa.com> References: <20030103151234.GA21140@arpa.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hurrah, I was able to get the output from a trace when the problem
described below occurs.
db> trace
Debugger(c0357efe,4,1,0,1) at Debugger+0x54
scgetc(c03c8400,2,b45afa2e,16166842,c25a6180) at scgetc+0x445
sckbdevent(c03a31e0,0,c03c8400,d1d51ccc,4e) at sckbdevent+0x1e0
atkbd_intr(c03a31e0,0,d1d51d08,c01ca531,c03a31e0) at atkbd_intr+0x2c
atkbd_isa_intr(c03a31e0,0,0,0,c25bc1c8) at atkbd_isa_intr+0x21
ithread_loop(c25a9b00,d1d51d48,0,20000,200381) at ithread_loop+0x1d1
fork_exit(c01ca360,c25a9b00,d1d51d48) at fork_exit+0xb3
fork_trampoline() at fork_trampoline+0x1a
--- trap 0x1, eip = 0, esp = 0xd1d51d7c, ebp = 0 ---
Regards,
Trent.
On Fri, Jan 03, 2003 at 09:12:34AM -0600, Trent Nelson wrote:
>
> I've experienced -current lock up in exactly the same way twice now;
> once with 5.0-RC2, and just now, with sources from 30th December.
>
> The system in question is a Sharp PC-AR50 laptop. In both instances
> the system was idle and I was editing a file in vim on ttyv0. Both
> systems exhibited the following symptoms:
>
> 1. Able to switch terminals using alt-F1..F8, but that's it, I'm un-
> able to type anything else (keyboard doesn't respond to letters,
> numbers, but capslock and numlock still turn on lights).
> 2. Responds to pings from other systems on the network.
> 3. Cannot connect to the machine via ssh from other systems. The
> connection is opened, according to ssh -vvv, but just hangs.
> 4. Mouse cursor not responding to either USB mouse or touchpad.
> 5. The screensaver (blank) still came on after ten minutes, and I
> believe that pressing a key that wasn't previously working turned
> it off. (I can't be 100% on that one, it was a pretty random bash
> at the keyboard, as you do when you turn off the screen saver.)
> 6. Trying out keys, pressing ctl-alt-break caused the following to be
> printed on ttyv0:
> sio4: detached
> ad4: removed from config
> ata2: detached
> 7. Trying out more keys, I could page up and down ttyv0 with scroll
> lock on.
> 8. When switching terminals or paging up/down, there was a very, very
> small latency between the keypress and the terminal switching or
> the page going up or down.
> 9. ctrl-alt-del did not work, had to hold down the power button for
> five seconds (hard shutdown) to turn the laptop off.
>
> I have not noticed any other problems with my laptop, and successfu-
> lly builtworld on it a number of times.
>
> Laptop has the following specs: PIII-850MHz, 20GB, DVD, 256MB RAM,
> at the time of the last freeze, had a 3Com 56K PCMCIA (3CCM156)
> modem in slot 0, and a CompactFlash PC Card adapter with a 256MB
> flash card in it in slot 1 -- which wasn't mounted. (Actually,
> the modem would have been present in the first freeze as well, but
> I doubt the flash card was.)
>
> % uname -a
> FreeBSD cherry.limekiln.vcisp.net 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Mon Dec 30 04:33:27 GMT 2002 trent@cherry.limekiln.vcisp.net:/usr/obj/shared/work/BSD/FreeBSD/FreeBSD-CURRENT/src/sys/CHERRY i386
>
> I've attached a copy of my kernel config. as well as the output from
> boot -v (taken from the next boot after the crash).
>
> Regards,
>
> Trent.
>
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #1: Mon Dec 30 04:33:27 GMT 2002
> trent@cherry.limekiln.vcisp.net:/usr/obj/shared/work/BSD/FreeBSD/FreeBSD-CURRENT/src/sys/CHERRY
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0485000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04850b4.
> Calibrating clock(s) ... TSC clock: 846271143 Hz, i8254 clock: 1193112 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> Timecounter "TSC" frequency 846324031 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (846.32-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x686 Stepping = 6
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 268369920 (255 MB)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x004ac000 - 0x0ffe7fff, 263438336 bytes (64316 pages)
> avail memory = 255811584 (243 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f71d0
> bios32: Entry = 0xfd8a0 (c00fd8a0) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xfd8a0+0x12f
> pnpbios: Found PnP BIOS data at 0xc00f7200
> pnpbios: Entry = f0000:abbe Rev = 1.0
> Other BIOS signatures found:
> Initializing GEOMetry subsystem
> null: <null device, zero device>
> random: <entropy source>
> mem: <memory & I/O>
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <SHARP PC-XJ800> on motherboard
> ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
> ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
> ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
> ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
> pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
> Using $PIR table, 7 entries at 0xc00fdf50
> PCI-Only Interrupts: none
> Location Bus Device Pin Link IRQs
> embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
> embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
> embedded 1 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
> embedded 1 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
> embedded 1 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 12 A 0x60 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 14 A 0x62 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 11 A 0x60 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 11 B 0x61 3 4 5 6 7 9 10 11 12 14 15
> acpi0: power button is handled as a fixed feature programming model.
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> Timecounter "ACPI-safe" frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> ---- initial configuration ------------------------
> \\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3
> \\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.14.0
> \\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0
> \\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.11.0
> \\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.11.1
> ---- before setting priority for links ------------
> ---- before fixup boot-disabled links -------------
> ---- after fixup boot-disabled links --------------
> ---- arbitrated configuration ---------------------
> \\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3
> \\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.14.0
> \\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0
> \\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.11.0
> \\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.11.1
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> map[10]: type 3, range 32, base f8000000, size 26, enabled
> found-> vendor=0x8086, dev=0x7190, revid=0x03
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x7191, revid=0x03
> bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
> lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x7110, revid=0x02
> bus=0, slot=7, func=0
> class=06-80-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
> found-> vendor=0x8086, dev=0x7111, revid=0x01
> bus=0, slot=7, func=1
> class=01-01-80, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled
> found-> vendor=0x8086, dev=0x7112, revid=0x01
> bus=0, slot=7, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=5
> map[90]: type 4, range 32, base 00002180, size 4, enabled
> found-> vendor=0x8086, dev=0x7113, revid=0x03
> bus=0, slot=7, func=3
> class=06-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type 4, range 32, base 0000f800, size 8, port disabled
> map[14]: type 1, range 32, base fedffc00, size 10, memory disabled
> found-> vendor=0x1113, dev=0x1216, revid=0x11
> bus=0, slot=11, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0010, statreg=0x0290, cachelnsz=8 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base fedfe000, size 12, memory disabled
> found-> vendor=0x104c, dev=0xac42, revid=0x00
> bus=0, slot=12, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base fedfd000, size 12, memory disabled
> found-> vendor=0x104c, dev=0xac42, revid=0x00
> bus=0, slot=12, func=1
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base fedff000, size 11, memory disabled
> map[14]: type 1, range 32, base fedf8000, size 14, enabled
> found-> vendor=0x104c, dev=0x8027, revid=0x00
> bus=0, slot=12, func=2
> class=0c-00-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D2 D3 current D0
> map[10]: type 4, range 32, base 0000f400, size 8, enabled
> found-> vendor=0x125d, dev=0x1988, revid=0x12
> bus=0, slot=14, func=0
> class=04-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 4, range 32, base 0000f000, size 8, enabled
> found-> vendor=0x125d, dev=0x1989, revid=0x12
> bus=0, slot=14, func=1
> class=07-80-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
> agp0: allocating GATT for aperture of size 64M
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: I/O decode 0xe000-0xefff
> pcib1: memory decode 0xfd000000-0xfecfffff
> pcib1: prefetched decode 0xfff00000-0xfffff
> ---- initial configuration ------------------------
> \\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 1.0.0
> ---- before setting priority for links ------------
> ---- before fixup boot-disabled links -------------
> ---- after fixup boot-disabled links --------------
> ---- arbitrated configuration ---------------------
> \\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 1.0.0
> pci1: <ACPI PCI bus> on pcib1
> pci1: physical bus=1
> map[10]: type 1, range 32, base fd000000, size 24, enabled
> map[14]: type 4, range 32, base 0000e800, size 8, enabled
> map[18]: type 1, range 32, base fecfe000, size 12, enabled
> found-> vendor=0x1002, dev=0x4c4d, revid=0x64
> bus=1, slot=0, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
> lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=9
> powerspec 1 supports D0 D1 D2 D3 current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> PCI-ISA bridge with incorrect subclass 0x80
> PCI-ISA bridge with incorrect subclass 0x80
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
> ata0: mask=03 ostat0=50 ostat2=00
> ata0-master: ATAPI 00 00
> ata0-slave: ATAPI 00 00
> ata0: mask=03 stat0=50 stat1=00
> ata0-master: ATA 01 a5
> ata0: devices=01
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
> ata1: mask=03 ostat0=50 ostat2=01
> ata1-master: ATAPI 14 eb
> ata1-slave: ATAPI 14 eb
> ata1: mask=03 stat0=00 stat1=01
> ata1: devices=0c
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfcc0-0xfcdf irq 5 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0xf800-0xf8ff mem 0xfedffc00-0xfedfffff irq 11 at device 11.0 on pci0
> dc0: Ethernet address: 00:d0:59:29:2e:f0
> miibus0: <MII bus> on dc0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: OUI 0x000895, model 0x0001, rev. 0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc0: bpf attached
> cbb0: <TI4451 PCI-CardBus Bridge> mem 0xfedfe000-0xfedfefff irq 11 at device 12.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <TI4451 PCI-CardBus Bridge> mem 0xfedfd000-0xfedfdfff irq 11 at device 12.1 on pci0
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pci0: <serial bus, FireWire> at device 12.2 (no driver attached)
> pci0: <multimedia, audio> at device 14.0 (no driver attached)
> pci0: <simple comms> at device 14.1 (no driver attached)
> acpi_acad0: <AC adapter> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> acpi_cmbat1: <Control method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
> acpi_button0: <Sleep Button> on acpi0
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ppc0: using extended I/O port range
> ppc0: ECP SPP SPP
> ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lp0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> unknown: not probed (disabled)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: unable to allocate IRQ
> psmcpnp0 irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000000, packet size:3
> psm0: syncmask:c0, syncbits:00
> acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc0000-0xcc7ff on isa0
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> le0: not probed (disabled)
> lnc0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x41 0x41 0x41 0x41
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> vga0: vga: WARNING: video mode switching is not fully supported on this adapter
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
> 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
> 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
> 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
> 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> procfs registered
> Timecounters tick every 10.000 msec
> lo0: bpf attached
> acpi_cpu0: set speed to 100.0%
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> acpi_acad0: acline initialization start
> system power profile changed to 'economy'
> acpi_cpu0: set speed to 50.0%
> acpi_acad0: Off Line
> acpi_cmbat0: battery initialization start
> acpi_cmbat1: battery initialization start
> pccard0: CIS version PCCARD 2.0 or 2.1
> pccard0: CIS info: 3COM, 3CCM156, 56K Global Modem PC Card
> pccard0: Manufacturer code 0x101, product 0x39
> pccard0: function 0: serial port, ccr addr 300 mask 3
> pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 3f8-3ff; rdybsy_active io8 irqlevel powerdown audio
> pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 2f8-2ff; rdybsy_active io8 irqlevel powerdown audio
> pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 3e8-3ef; rdybsy_active io8 irqlevel powerdown audio
> pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 2e8-2ef; rdybsy_active io8 irqlevel powerdown audio
> pccard0: Allocation failed for cfe 32
> sio4 at port 0x2f8-0x2ff irq 11 function 0 config 33 on pccard0
> sio4: type 16550A
> sio4: unable to activate interrupt in fast mode - using normal mode
> pccard1: CIS version PCCARD 2.0 or 2.1
> pccard1: CIS info: TOSHIBA THNCF256MBA , , ,
> pccard1: Manufacturer code 0x98, product 0x0
> pccard1: function 0: fixed disk, ccr addr 200 mask f
> pccard1: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; mwait_required rdybsy_active powerdown
> pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
> pccard1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
> pccard1: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
> pccard1: Allocation failed for cfe 0
> ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard1
> ata2: iobase=0x0100 altiobase=0x0110 bmaddr=0x0000
> ata2: mask=01 ostat0=50 ostat2=00
> ata2-master: ATAPI 00 00
> ata2: mask=01 stat0=50 stat1=00
> ata2-master: ATA 01 a5
> ata2: devices=01
> ata1-slave: ATAPI identify retries exceeded
> ad0: success setting UDMA2 on Intel chip
> GEOM: new disk ad0
> ar: FreeBSD check1 failed
> ad0: <FUJITSU MHM2200AT/3822> ATA-5 disk at ata0-master
> ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA33
> ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
> ar: FreeBSD check1 failed
> ad4: <TOSHIBA THNCF256MBA/2.00> ATA-0 disk at ata2-master
> ad4: 244MB (500736 sectors), 978 C, 16 H, 32 S, 512 B
> ad4: 1 secs/int, 1 depth queue, BIOSPIO
> ad4: piomode=2 dmamode=-1 udmamode=-1 cblid=0
> ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
> ata1-master: success setting PIO4 on generic chip
> acd0: <UJDA540/1.30> DVD-ROM drive at ata1 as master
> acd0: read 4132KB/s (34015KB/s), 128KB buffer, PIO4
> acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> GEOM: Configure ad0s1, start 32256 length 12584646144 end 12584678399
> GEOM: Configure ad0s2, start 12584678400 length 7419202560 end 20003880959
> GEOM: new disk ad4
> GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
> GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
> GEOM: Configure ad0s2b, start 134217728 length 536870912 end 671088639
> GEOM: Configure ad0s2c, start 0 length 7419202560 end 7419202559
> GEOM: Configure ad0s2d, start 671088640 length 134217728 end 805306367
> GEOM: Configure ad0s2e, start 805306368 length 134217728 end 939524095
> GEOM: Configure ad0s2f, start 939524096 length 6479678464 end 7419202559
> GEOM: Configure ad4s1, start 16384 length 256098304 end 256114687
> Mounting root from ufs:/dev/ad0s2a
> WARNING: / was not properly dismounted
> start_init: trying /sbin/init
> WARNING: /usr was not properly dismounted
> /usr: mount pending error: blocks 16 files 1
> WARNING: /var was not properly dismounted
> /var: mount pending error: blocks 0 files 1
> WARNING: /var/tmp was not properly dismounted
> splash: image decoder found: blank_saver
> Linux ELF exec handler installed
> acpi_acad0: acline initialization done, tried 7 times
> acpi_cmbat0: battery initialization failed, giving up
> acpi_cmbat1: battery initialization failed, giving up
>
> machine i386
> cpu I686_CPU
> ident CHERRY
> maxusers 0
>
> #To statically compile in device wiring instead of /boot/device.hints
> #hints "GENERIC.hints" #Default places to look for devices.
>
> makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
> options INET #InterNETworking
> #options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_ACL #Support for access control lists
> options UFS_DIRHASH #Improve performance on big directories
> options MD_ROOT #MD is a potential root device
> options NFSCLIENT #Network Filesystem Client
> options NFSSERVER #Network Filesystem Server
> options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem (requires PSEUDOFS)
> options PSEUDOFS #Pseudo-filesystem framework
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options COMPAT_FREEBSD4 #Compatible with FreeBSD4
> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # # output. Adds ~128k to driver.
> #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # # output. Adds ~215k to driver.
>
> # Debugging for use in -current
> options DDB #Enable the kernel debugger
> #options INVARIANTS #Enable calls of extra sanity checking
> #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
> #options WITNESS #Enable checks to detect deadlocks and cycles
> #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
>
> # To make an SMP kernel, the next two are needed
> #options SMP # Symmetric MultiProcessor Kernel
> #options APIC_IO # Symmetric (APIC) I/O
>
> device isa
> device eisa
> device pci
>
> # Floppy drives
> device fdc
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI Controllers
> #device ahb # EISA AHA1742 family
> #device ahc # AHA2940 and onboard AIC7xxx devices
> #device ahd # AHA39320/29320 and onboard AIC79xx devices
> #device amd # AMD 53C974 (Tekram DC-390(T))
> #device isp # Qlogic family
> #device mpt # LSI-Logic MPT-Fusion
> ##device ncr # NCR/Symbios Logic
> #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
> #device trm # Tekram DC395U/UW/F DC315U adapters
> #
> #device adv # Advansys SCSI adapters
> #device adw # Advansys wide SCSI adapters
> #device aha # Adaptec 154x SCSI adapters
> #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
> #device bt # Buslogic/Mylex MultiMaster SCSI adapters
> #
> #device ncv # NCR 53C500
> #device nsp # Workbit Ninja SCSI-3
> #device stg # TMC 18C30/18C50
> #
> ## RAID controllers interfaced to the SCSI subsystem
> #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> #device ciss # Compaq Smart RAID 5*
> #device dpt # DPT Smartcache III, IV - See NOTES for options!
> #device iir # Intel Integrated RAID
> #device mly # Mylex AcceleRAID/eXtremeRAID
> #
> ## SCSI peripherals
> #device scbus # SCSI bus (required)
> #device ch # SCSI media changers
> #device da # Direct Access (disks)
> #device sa # Sequential Access (tape etc)
> #device cd # CD
> #device pass # Passthrough device (direct SCSI access)
> #device ses # SCSI Environmental Services (and SAF-TE)
> #
> ## RAID controllers
> #device aac # Adaptec FSA RAID
> #device aacp # SCSI passthrough for aac (requires CAM)
> #device amr # AMI MegaRAID
> #device ida # Compaq Smart RAID
> #device mlx # Mylex DAC960 family
> #device pst # Promise Supertrak SX6000
> #device twe # 3ware ATA RAID
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device vga # VGA video card driver
>
> device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> # Enable this for the pcvt (VT220 compatible) console driver
> #device vt
> #options XSERVER # support for X server on a vt console
> #options FAT_CURSOR # start with block cursor
>
> device agp # support several AGP chipsets
>
> # Floating point support - do not disable.
> device npx
>
> # Power management support (see NOTES for more options)
> #device apm
> # Add suspend/resume support for the i8254.
> device pmtimer
>
> # PCCARD (PCMCIA) support
> # Pcmcia and cardbus bridge support
> device cbb # cardbus (yenta) bridge
> #device pcic # ExCA ISA and PCI bridges
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> device sio # 8250, 16[45]50 based serial ports
>
> # Parallel port
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> #device de # DEC/Intel DC21x4x (``Tulip'')
> #device em # Intel PRO/1000 adapter Gigabit Ethernet Card
> #device txp # 3Com 3cR990 (``Typhoon'')
> #device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
> device miibus # MII bus support
> device dc # DEC/Intel 21143 and various workalikes
> #device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
> #evice rl # RealTek 8129/8139
> #evice sf # Adaptec AIC-6915 (``Starfire'')
> #evice sis # Silicon Integrated Systems SiS 900/SiS 7016
> #evice ste # Sundance ST201 (D-Link DFE-550TX)
> #evice tl # Texas Instruments ThunderLAN
> #evice tx # SMC EtherPower II (83c170 ``EPIC'')
> #evice vr # VIA Rhine, Rhine II
> #evice wb # Winbond W89C840F
> #evice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
> #evice bge # Broadcom BCM570xx Gigabit Ethernet
>
> # ISA Ethernet NICs. pccard nics included.
> #evice cs # Crystal Semiconductor CS89x0 NIC
> # 'device ed' requires 'device miibus'
> #evice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
> #evice ex # Intel EtherExpress Pro/10 and Pro/10+
> #evice ep # Etherlink III based cards
> #evice fe # Fujitsu MB8696x based cards
> #evice lnc # NE2100, NE32-VL Lance Ethernet cards
> #evice sn # SMC's 9000 series of ethernet chips
> #evice xe # Xircom pccard ethernet
>
> # ISA devices that use the old ISA shims
> #device le
>
> # Wireless NIC cards
> #evice an # Aironet 4500/4800 802.11 wireless NICs.
> #evice awi # BayStack 660 and others
> #evice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> #device wl # Older non 802.11 Wavelan wireless NIC.
>
> # Pseudo devices - the number indicates how many units to allocate.
> device random # Entropy device
> device loop # Network loopback
> device ether # Ethernet support
> device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
> device snp # Snoop device
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> device bpf # Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> #device udbp # USB Double Bulk Pipe devices
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> #device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> #device urio # Diamond Rio 500 MP3 player
> #device uscanner # Scanners
> # USB Ethernet, requires mii
> #device aue # ADMtek USB ethernet
> #device cue # CATC USB ethernet
> #device kue # Kawasaki LSI USB ethernet
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030121221919.GB14964>