Date: Sat, 8 Jun 1996 16:39:17 +0200 (MET DST) From: Michael Beckmann <petzi@zit.th-darmstadt.de> To: scsi@freebsd.org Subject: Fast SCSI-2 = 6 MB/sec ? Message-ID: <Pine.BSF.3.91.960608162724.401A-100000@zit1.zit.th-darmstadt.de>
next in thread | raw e-mail | index | archive | help
I have just installed a Plextor SCSI CD ROM drive in my machine. I had to find out that it supports only 6 MB/sec. Here is the output from dmesg: ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:8 ncr0 waiting for scsi devices to settle (ncr0:0:0): 200ns (5 Mb/sec) offset 8. (ncr0:0:0): "IBM OEM DFHSS4F 4141" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 4303MB (8813870 512 byte sectors) (ncr0:2:0): 200ns (5 Mb/sec) offset 8. (ncr0:2:0): "IBM OEM 0662S12 2 23" type 0 fixed SCSI 2 sd1(ncr0:2:0): Direct-Access sd1(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1003MB (2055035 512 byte sectors) (ncr0:3:0): "PLEXTOR CD-ROM PX-4XCE 1.01" type 5 removable SCSI 2 cd0(ncr0:3:0): CD-ROM cd0(ncr0:3:0): FAST SCSI-2 175ns (6 Mb/sec) offset 8. ^^^^^^^^^^ cd0(ncr0:3:0): NOT READY asc:3a,0 Medium not present can't get the size (ncr0:5:0): "HP C1533A 9503" type 1 removable SCSI 2 st0(ncr0:5:0): Sequential-Access st0(ncr0:5:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. density code 0x13, variable blocks, write-enabled I know that the CD ROM drive can never deliver a throughput of 6 MB/sec, (actually, it should deliver around 680 kByte/sec.) but I wonder if the CD ROM drive decreases the performance of the entire bus, thus limiting the bus throughput to 6 MB/sec. Am I right ? Should I be concerned about this and replace the CD drive ? I wonder if my bus is running at 10 MByte/sec at all, because the hard drives report both 5 MB/sec and 10 MB/sec. Michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960608162724.401A-100000>