Date: Sat, 9 Apr 2016 19:52:46 +0000 From: =?utf-8?B?V2Vpw58sICBEci4gSsO8cmdlbg==?= <weiss@uni-mainz.de> To: 'Erik Moe' <e.moe@rcn.com>, Daniel Braniss <danny@cs.huji.ac.il> Cc: freebsd-arm <freeBSD-arm@freebsd.org> Subject: RE: Odroidc1+ stuck booting Message-ID: <a2285c9d127c4c5f8d86b0faad365a52@uni-mainz.de> In-Reply-To: <6FF9B11B-1F63-49FC-8195-58B4B963F204@rcn.com> References: <687E2129-BE66-4CC9-9B30-D8DFB7A2FEF6@cs.huji.ac.il> <982FE02C-7BEC-4CA0-BCAE-FE6CC5C9CFB4@rcn.com> <B39CD871-7BE5-44EA-816A-42A80E34D8A7@rcn.com> <EEAFAE63-3550-4862-924C-B8E7B68FC62E@cs.huji.ac.il> <CCC86C18-EE51-4A24-A9A1-4FDCBB28B198@cs.huji.ac.il> <F5CCEBD7-0C43-415C-97E5-35BEC63BEDC6@rcn.com> <77D2CAED-B44A-4602-8C70-C3DD0A8D089C@cs.huji.ac.il> <6FF9B11B-1F63-49FC-8195-58B4B963F204@rcn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I have a C1+ and just booted a FreeBSD current kernel not older than a week without problems. fatload mmc 0:1 0x21000000 kernel.bin go 0x21000000 Maybe you could try a different sd card, as it seems to get stuck at a time when it is probing the sd cards. Regards Juergen > -----Original Message----- > From: owner-freebsd-arm@freebsd.org [mailto:owner-freebsd-arm@freebsd.org] On Behalf Of > Erik Moe > Sent: Tuesday, April 05, 2016 10:53 PM > To: Daniel Braniss > Cc: freebsd-arm > Subject: Re: Odroidc1+ stuck booting > > That’s correct I have a C1, not a C1+. > > Erik > > > On Apr 4, 2016, at 6:02 AM, Daniel Braniss <danny@cs.huji.ac.il> wrote: > > > > I assume you have a C1 not a C1+, because I’m doing the same, > > and no luck. I know that the board is ok because It boots and runs Daisuke-san’s image. > > danny > > > >> On 31 Mar 2016, at 15:29, Erik Moe <e.moe@rcn.com> wrote: > >> > >> Everything I’m doing I “borrowed” from here: > https://wiki.freebsd.org/FreeBSD/arm/Odroid-C1 > >> > >> I’m using the stock ODROIDC1 kernel config in head which builds the FTD statically into > the kernel from src/sys/boot/fdt/dts/arm/odroidc1.dts. I liberated u-boot from > ArchLinuxARM-odroid-c1-latest.tar.gz. My boot.ini is simply this: > >> > >> ODROIDC-UBOOT-CONFIG > >> > >> setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" > >> run bootcmd > >> > >> Erik > >> > >>> On Mar 31, 2016, at 1:36 AM, Daniel Braniss <danny@cs.huji.ac.il> wrote: > >>> > >>> oh, and if you feel generous your ODROIDC1.conf … > >>> thanks, > >>> danny > >>> > >>>> On 31 Mar 2016, at 09:31, Daniel Braniss <danny@cs.huji.ac.il> wrote: > >>>> > >>>> hi Erik, > >>>> can you send me your > >>>> uboot > >>>> boot.ini > >>>> *.dtb > >>>> I’m pretty sure the issue is somewhere there then. > >>>> thanks, > >>>> danny > >>>> > >>>>> On 31 Mar 2016, at 09:11, Erik Moe <e.moe@rcn.com> wrote: > >>>>> > >>>>> I built a new image for my odriod-c1 for ssd from the latest sources and had no > issues and didn’t need to tweet anything. I don’t have and odriod-c1+, but my > understanding is there isn’t much difference between the two. I am using the serial > console. > >>>>> > >>>>> QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:10;BOOT:1;INIT:0;READ:0;CHECK:0;PASS:1; > >>>>> ----------------------------------------------------------------------- > >>>>> * Welcome to Hardkernel's ODROID-C... (Built at 19:33:00 Dec 8 2014) * > >>>>> ----------------------------------------------------------------------- > >>>>> CPU : AMLogic S805 > >>>>> MEM : 1024MB (DDR3@792MHz) > >>>>> BID : HKC13C0001 > >>>>> S/N : HKC1CC037EBE4620 > >>>>> 0x0000009f > >>>>> check SD_boot_type:0x1 card_type:0x1 > >>>>> Loading U-boot...success. > >>>>> > >>>>> > >>>>> U-boot(odroidc@) (Jun 12 2015 - 17:31:14) > >>>>> > >>>>> DRAM: 1 GiB > >>>>> relocation Offset is: 2ff1c000 > >>>>> MMC: SDCARD: 0, eMMC: 1 > >>>>> IR init is done! > >>>>> vpu clk_level = 3 > >>>>> set vpu clk: 182150000Hz, readback: 182150000Hz(0x701) > >>>>> mode = 6 vic = 4 > >>>>> set HDMI vic: 4 > >>>>> mode is: 6 > >>>>> viu chan = 1 > >>>>> config HPLL > >>>>> config HPLL done > >>>>> reconfig packet setting done > >>>>> MMC read: dev # 0, block # 33984, count 12288 ... 12288 blocks read: OK > >>>>> There is no valid bmp file at the given address > >>>>> ============================================================ > >>>>> Vendor: Man 035344 Snr 29cfee4e Rev: 8.0 Prod: SL08G > >>>>> Type: Removable Hard Disk > >>>>> Capacity: 7580.0 MB = 7.4 GB (15523840 x 512) > >>>>> ------------------------------------------------------------ > >>>>> Partition Start Sector Num Sectors Type > >>>>> 1 1134 131040 6 > >>>>> 2 132174 15391666 a5 > >>>>> ============================================================ > >>>>> Net: Meson_Ethernet > >>>>> init suspend firmware done. (ret:0) > >>>>> Hit Enter key to stop autoboot -- : 0 > >>>>> exit abortboot: 0 > >>>>> reading boot.ini > >>>>> > >>>>> 98 bytes read > >>>>> Loading boot.ini from mmc0:1 (vfat) > >>>>> Executing the script... > >>>>> setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" > >>>>> run bootcmd > >>>>> reading kernel.bin > >>>>> > >>>>> 6055396 bytes read > >>>>> ## Starting application at 0x00100000 ... > >>>>> ARM Debug Architecture v7 > >>>>> 2 watchpoints and 3 breakpoints supported > >>>>> KDB: debugger backends: ddb > >>>>> KDB: current backend: ddb > >>>>> Copyright (c) 1992-2016 The FreeBSD Project. > >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >>>>> The Regents of the University of California. All rights reserved. > >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. > >>>>> FreeBSD 11.0-CURRENT #4 43026a8(master)-dirty: Thu Mar 31 04:14:32 CDT 2016 > >>>>> root@dora:/usr/home/emoe/Projects/ARM/odroid- > c1/obj/arm.armv6hf/usr/home/emoe/Projects/ARM/src/sys/ODROIDC1 arm > >>>>> FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) > >>>>> WARNING: WITNESS option enabled, expect reduced performance. > >>>>> VT: init without driver. > >>>>> Preloaded elf kernel "kernel" at 0xc07c5d6c. > >>>>> CPU: Cortex A5 rev 1 (Cortex-A core) > >>>>> Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext > >>>>> WB enabled LABT branch prediction disabled > >>>>> LoUU:2 LoC:2 LoUIS:2 > >>>>> Cache level 1: > >>>>> 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc > >>>>> 32KB/32B 2-way instruction cache Read-Alloc > >>>>> real memory = 1073737728 (1023 MB) > >>>>> avail memory = 1038233600 (990 MB) > >>>>> Physical memory chunk(s): > >>>>> 0x00001000 - 0x3fffffff, 1023 MB ( 262143 pages) > >>>>> Excluded memory regions: > >>>>> 0x00100000 - 0x00853fff, 7 MB ( 1876 pages) NoAlloc > >>>>> Static device mappings: > >>>>> 0xc1100000 - 0xc12fffff mapped at VA 0xffd00000 > >>>>> 0xc4200000 - 0xc42fffff mapped at VA 0xffc00000 > >>>>> 0xc4300000 - 0xc43fffff mapped at VA 0xffb00000 > >>>>> 0xc8000000 - 0xc80fffff mapped at VA 0xffa00000 > >>>>> 0xc8100000 - 0xc81fffff mapped at VA 0xff900000 > >>>>> 0xc9000000 - 0xc97fffff mapped at VA 0xff100000 > >>>>> 0xd9000000 - 0xd90fffff mapped at VA 0xff000000 > >>>>> 0xda000000 - 0xda0fffff mapped at VA 0xfef00000 > >>>>> Amlogic aml8726-m8b SoC > >>>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > >>>>> ULE: setup cpu 0 > >>>>> ULE: setup cpu 1 > >>>>> ULE: setup cpu 2 > >>>>> ULE: setup cpu 3 > >>>>> random: entropy device external interface > >>>>> null: <full device, null device, zero device> > >>>>> openfirm: <Open Firmware control device> > >>>>> mem: <memory> > >>>>> nfslock: pseudo-device > >>>>> crypto: <crypto core> > >>>>> random: harvesting attach, 8 bytes (4 bits) from nexus0 > >>>>> ofwbus0: <Open Firmware Device Tree> > >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0 > >>>>> clkmsr0: <Amlogic aml8726 clkmsr> mem 0xc1108758-0xc1108767 on simplebus0 > >>>>> clkmsr0: bus clock 159 MHz > >>>>> random: harvesting attach, 8 bytes (4 bits) from clkmsr0 > >>>>> l2cache0: <PL310 L2 cache controller> mem 0xc4200000-0xc4200fff irq 0 on ofwbus0 > >>>>> l2cache0: Part number: 0x3, release: 0x9 > >>>>> l2cache0: L2 Cache enabled: 512KB/32B 8 ways > >>>>> l2cache0: Early BRESP response: disabled > >>>>> l2cache0: Instruction prefetch: disabled > >>>>> l2cache0: Data prefetch: enabled > >>>>> l2cache0: Non-secure interrupt control: disabled > >>>>> l2cache0: Non-secure lockdown: disabled > >>>>> l2cache0: Share override: disabled > >>>>> l2cache0: Double linefill: disabled > >>>>> l2cache0: Instruction prefetch: disabled > >>>>> l2cache0: Data prefetch: enabled > >>>>> l2cache0: Double linefill on WRAP request: disabled > >>>>> l2cache0: Prefetch drop: disabled > >>>>> l2cache0: Incr double Linefill: disabled > >>>>> l2cache0: Not same ID on exclusive sequence: disabled > >>>>> l2cache0: Prefetch offset: 0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from l2cache0 > >>>>> scu0: <ARM Snoop Control Unit> mem 0xc4300000-0xc4300fff on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from scu0 > >>>>> cpuconfig0: <Amlogic CPU Config> mem 0xd901ff80-0xd901ff8f on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpuconfig0 > >>>>> ccm0: <Amlogic aml8726 ccm> mem 0xc1104140-0xc1104153 on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from ccm0 > >>>>> pinctrl0: <Amlogic aml8726 pinctrl> mem 0xc11080b0-0xc11080d7,0xc11080e8- > 0xc11080ff,0xc1108120-0xc1108137,0xc8100014-0xc8100017,0xc810002c-0xc810002f,0xc810002c- > 0xc810002f on simplebus0 > >>>>> Processing 3 pin-config node(s) in pinctrl-0 for pinctrl@c11080b0 > >>>>> Processing 1 pin-config node(s) in pinctrl-0 for mmc@c1108c20 > >>>>> Processing 1 pin-config node(s) in pinctrl-0 for sdxc@c1108e00 > >>>>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0 > >>>>> gic0: <ARM Generic Interrupt Controller> mem 0xc4301000-0xc4301fff,0xc4300100- > 0xc43001ff on ofwbus0 > >>>>> ofwbus0: no default resources for rid = 0, type = 1 > >>>>> gic0: pn 0x390, arch 0x1, rev 0x1, implementer 0x43b irqs 256 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gic0 > >>>>> wdt0: <Amlogic aml8726 WDT> mem 0xc1109900-0xc1109907 irq 2 on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from wdt0 > >>>>> timer0: <Amlogic aml8726 timer> mem 0xc1109940-0xc1109957 irq 1 on ofwbus0 > >>>>> Event timer "aml8726 timer A" frequency 1000000 Hz quality 1000 > >>>>> Timecounter "aml8726 timer E" frequency 1000000 Hz quality 1000 > >>>>> random: harvesting attach, 8 bytes (4 bits) from timer0 > >>>>> uart0: <Amlogic aml8726 UART> mem 0xc81004c0-0xc81004d7 irq 3 on simplebus0 > >>>>> uart0: RTS iflow, CTS oflow > >>>>> uart0: console (115200,n,8,1) > >>>>> uart0: fast interrupt > >>>>> uart0: PPS capture mode: DCDinvalid > >>>>> random: harvesting attach, 8 bytes (4 bits) from uart0 > >>>>> uart1: <Amlogic aml8726 UART> mem 0xc11084c0-0xc11084d7 irq 4 on simplebus0 > >>>>> uart1: RTS iflow, CTS oflow > >>>>> uart1: fast interrupt > >>>>> uart1: PPS capture mode: DCDinvalid > >>>>> random: harvesting attach, 8 bytes (4 bits) from uart1 > >>>>> uart2: <Amlogic aml8726 UART> mem 0xc11084dc-0xc11084f3 irq 5 on simplebus0 > >>>>> uart2: RTS iflow, CTS oflow > >>>>> uart2: fast interrupt > >>>>> uart2: PPS capture mode: DCDinvalid > >>>>> random: harvesting attach, 8 bytes (4 bits) from uart2 > >>>>> uart3: <Amlogic aml8726 UART> mem 0xc1108700-0xc1108717 irq 6 on simplebus0 > >>>>> uart3: RTS iflow, CTS oflow > >>>>> uart3: fast interrupt > >>>>> uart3: PPS capture mode: DCDinvalid > >>>>> random: harvesting attach, 8 bytes (4 bits) from uart3 > >>>>> simplebus0: <i2c@c8100500> mem 0xc8100500-0xc810051f irq 7 disabled compat > amlogic,meson6-i2c (no driver attached) > >>>>> aml8726_iic0: <Amlogic aml8726 I2C> mem 0xc1108500-0xc110851f irq 8 on simplebus0 > >>>>> iicbb0: <I2C bit-banging driver> on aml8726_iic0 > >>>>> iicbus0: <Philips I2C bus> on iicbb0 master-only > >>>>> iic0: <I2C generic I/O> on iicbus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iic0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iicbus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iicbb0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic0 > >>>>> aml8726_iic1: <Amlogic aml8726 I2C> mem 0xc11087c0-0xc11087df irq 9 on simplebus0 > >>>>> iicbb1: <I2C bit-banging driver> on aml8726_iic1 > >>>>> iicbus1: <Philips I2C bus> on iicbb1 master-only > >>>>> iic1: <I2C generic I/O> on iicbus1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iic1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iicbus1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from iicbb1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic1 > >>>>> simplebus0: <ir-receiver@c8100480> mem 0xc8100480-0xc810049f irq 10 disabled compat > amlogic,meson6-ir (no driver attached) > >>>>> simplebus0: <spi@c1108c80> mem 0xc1108c80-0xc1108cff disabled compat amlogic,meson6- > spifc (no driver attached) > >>>>> simplebus0: <ethernet@c9410000> mem 0xc9410000-0xc941ffff,0xc1108108-0xc110810b irq > 11 disabled compat amlogic,meson6-dwmac (no driver attached) > >>>>> rtc0: <Amlogic aml8726 RTC> mem 0xc8100740-0xc8100753 irq 12 on simplebus0 > >>>>> rtc0: crystal oscillator check failed > >>>>> device_attach: rtc0 attach returned 6 > >>>>> gpio0: <Amlogic aml8726 GPIO> mem 0xc8100024-0xc8100027,0xc8100024- > 0xc8100027,0xc8100028-0xc810002b on simplebus0 > >>>>> gpiobus0: <OFW GPIO bus> on gpio0 > >>>>> gpioled0: <GPIO led> at pin 13 on gpiobus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0 > >>>>> gpioc0: <GPIO controller> on gpio0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpio0 > >>>>> gpio1: <Amlogic aml8726 GPIO> mem 0xc1108054-0xc1108057,0xc1108058- > 0xc110805b,0xc110805c-0xc110805f on simplebus0 > >>>>> gpiobus1: <OFW GPIO bus> on gpio1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus1 > >>>>> gpioc1: <GPIO controller> on gpio1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpio1 > >>>>> gpio2: <Amlogic aml8726 GPIO> mem 0xc110806c-0xc110806f,0xc1108070- > 0xc1108073,0xc1108074-0xc1108077 on simplebus0 > >>>>> gpiobus2: <OFW GPIO bus> on gpio2 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus2 > >>>>> gpioc2: <GPIO controller> on gpio2 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc2 > >>>>> random: harvesting attach, 8 bytes (4 bits) from gpio2 > >>>>> aml8726_mmc0: <Amlogic aml8726 MMC> mem 0xc1108c20-0xc1108c3f irq 13 on simplebus0 > >>>>> mmc0: <MMC/SD bus> on aml8726_mmc0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from mmc0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_mmc0 > >>>>> aml8726_sdxc0: <Amlogic aml8726-m8 SDXC> mem 0xc1108e00-0xc1108e3b irq 14 on > simplebus0 > >>>>> mmc1: <MMC/SD bus> on aml8726_sdxc0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from mmc1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from aml8726_sdxc0 > >>>>> simplebus0: <rng@c1108100> mem 0xc1108100-0xc1108107 compat amlogic,aml8726-rng (no > driver attached) > >>>>> usbphy0: <Amlogic aml8726-m8 USB PHY> mem 0xc1108800-0xc110881f on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from usbphy0 > >>>>> usbphy1: <Amlogic aml8726-m8 USB PHY> mem 0xc1108820-0xc110883f on simplebus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from usbphy1 > >>>>> dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xc9040000-0xc907ffff irq 15 on > simplebus0 > >>>>> usbus0 on dwcotg0 > >>>>> dwcotg0: usbpf: Attached > >>>>> random: harvesting attach, 8 bytes (4 bits) from usbus0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from dwcotg0 > >>>>> dwcotg1: <DWC OTG 2.0 integrated USB controller> mem 0xc90c0000-0xc90fffff irq 16 on > simplebus0 > >>>>> usbus1 on dwcotg1 > >>>>> dwcotg1: usbpf: Attached > >>>>> random: harvesting attach, 8 bytes (4 bits) from usbus1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from dwcotg1 > >>>>> dwc0: <Amlogic Meson Gigabit Ethernet Controller> mem 0xc9410000-0xc9411fff irq 11 > on simplebus0 > >>>>> miibus0: <MII bus> on dwc0 > >>>>> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 > >>>>> rgephy0: OUI 0x00e04c, model 0x0011, rev. 6 > >>>>> rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, > 1000baseT-FDX-master, auto > >>>>> random: harvesting attach, 8 bytes (4 bits) from rgephy0 > >>>>> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > >>>>> rgephy1: OUI 0x00e04c, model 0x0011, rev. 6 > >>>>> rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, > 1000baseT-FDX-master, auto > >>>>> random: harvesting attach, 8 bytes (4 bits) from rgephy1 > >>>>> random: harvesting attach, 8 bytes (4 bits) from miibus0 > >>>>> dwc0: bpf attached > >>>>> dwc0: Ethernet address: 62:73:64:5d:6a:ec > >>>>> random: harvesting attach, 8 bytes (4 bits) from dwc0 > >>>>> fb0: <Amlogic aml8726 FB> mem 0xc8006048-0xc8006053,0xc1106800- > 0xc1106bff,0xc1107400-0xc11077ff irq 17,18,19,20 on simplebus0 > >>>>> fbd0 on fb0 > >>>>> VT: initialize with new VT driver "fb". > >>>>> random: harvesting attach, 8 bytes (4 bits) from fbd0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from fb0 > >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 > >>>>> cpu0: <Open Firmware CPU> on cpulist0 > >>>>> cpu0: missing 'clock-frequency' property > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpu0 > >>>>> cpu1: <Open Firmware CPU> on cpulist0 > >>>>> cpu1: missing 'clock-frequency' property > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpu1 > >>>>> cpu2: <Open Firmware CPU> on cpulist0 > >>>>> cpu2: missing 'clock-frequency' property > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpu2 > >>>>> cpu3: <Open Firmware CPU> on cpulist0 > >>>>> cpu3: missing 'clock-frequency' property > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpu3 > >>>>> random: harvesting attach, 8 bytes (4 bits) from cpulist0 > >>>>> ofwbus0: <clk@0> compat fixed-clock (no driver attached) > >>>>> ofwbus0: <leds> compat gpio-leds (no driver attached) > >>>>> cryptosoft0: <software crypto> > >>>>> crypto: assign cryptosoft0 driver id 0, flags 100663296 > >>>>> crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 > >>>>> crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 > >>>>> random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 > >>>>> procfs registered > >>>>> Timecounters tick every 10.000 msec > >>>>> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 > >>>>> usbus0: 480Mbps High Speed USB v2.0 > >>>>> IPsec: Initialized Security Association Processing. > >>>>> lo0: bpf attached > >>>>> mmc0: Probing bus > >>>>> usbus1: 480Mbps High Speed USB v2.0 > >>>>> mmc0: SD 2.0 interface conditions: OK > >>>>> mmc0: SD probe: OK (OCR: 0x40ff8000) > >>>>> mmc0: Current OCR: 0x00ff8000 > >>>>> ugen1.1: <DWCOTG> at usbus1 > >>>>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > >>>>> ugen0.1: <DWCOTG> at usbus0 > >>>>> uhub1: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > >>>>> mmc0: Probing cards > >>>>> mmc0: New card detected (CID 035344534c3038478029cfee4e00f900) > >>>>> mmc0: New card detected (CSD 400e00325b5900003b377f800a404000) > >>>>> mmc0: Card at relative address 0xaaaa added: > >>>>> mmc0: card: SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD > >>>>> mmc0: bus: 4bit, 50MHz, high speed timing > >>>>> mmc0: memory: 15523840 blocks, erase sector 8192 blocks > >>>>> mmc0: setting transfer rate to 39.750MHz (high speed timing) > >>>>> mmcsd0: 8GB <SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD> at mmc0 39.7MHz/4bit/8- > block > >>>>> random: harvesting attach, 8 bytes (4 bits) from mmcsd0 > >>>>> mmc1: Probing bus > >>>>> GEOM: new disk mmcsd0 > >>>>> mmc0: setting bus width to 4 bits > >>>>> GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes > >>>>> GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes > >>>>> mmc1: SD probe: failed > >>>>> mmc1: MMC probe: failed > >>>>> mmc1: Current OCR: 0x00000000 > >>>>> mmc1: No compatible cards found on bus > >>>>> Release APs > >>>>> WARNING: WITNESS option enabled, expect reduced performance. > >>>>> Trying to mount root from ufs:mmcsd0s2 []... > >>>>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not aligned on 4194304 > bytes > >>>>> warning: no time-of-day clock registered, system time will not be set accurately > >>>>> start_init: trying /sbin/init > >>>>> uhub0: 1 port with 1 removable, self powered > >>>>> random: harvesting attach, 8 bytes (4 bits) from uhub0 > >>>>> uhub1: 1 port with 1 removable, self powered > >>>>> random: harvesting attach, 8 bytes (4 bits) from uhub1 > >>>>> ugen1.2: <vendor 0x05e3> at usbus1 > >>>>> uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus1 > >>>>> uhub2: MTT enabled > >>>>> Growing root partition to fill device > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not aligned on 4194304 > bytes > >>>>> mmcsd0s2 resized > >>>>> growfs: superblock not recognized > >>>>> /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a > new one > >>>>> uhub2: 4 ports with 4 removable, self powered > >>>>> random: harvesting attach, 8 bytes (4 bits) from uhub2 > >>>>> Setting hostuuid: 214610b1-f72e-11e5-8203-df073412266c. > >>>>> Setting hostid: 0x373425ad. > >>>>> No suitable dump device was found. > >>>>> Starting file system checks: > >>>>> /dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS > >>>>> /dev/mmcsd0s2: clean, 36687 free (103 frags, 4573 blocks, 0.0% fragmentation) > >>>>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned on 4194304 > bytes > >>>>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not aligned on 4194304 > bytes > >>>>> Mounting local file systems:. > >>>>> Setting hostname: freebsd. > >>>>> Setting up > harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,C > ACHED > >>>>> Feeding entropy:random: unblocking device. > >>>>> . > >>>>> dwc0: link state changed to DOWN > >>>>> Starting Network: lo0 dwc0. > >>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > >>>>> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > >>>>> inet6 ::1 prefixlen 128 > >>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > >>>>> inet 127.0.0.1 netmask 0xff000000 > >>>>> groups: lo > >>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > >>>>> dwc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > >>>>> options=80008<VLAN_MTU,LINKSTATE> > >>>>> ether 62:73:64:5d:6a:ec > >>>>> media: Ethernet autoselect (none) > >>>>> status: no carrier > >>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > >>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat > >>>>> Starting devd. > >>>>> add net fe80::: gateway ::1 > >>>>> add net ff02::: gateway ::1 > >>>>> add net ::ffff:0.0.0.0: gateway ::1 > >>>>> add net ::0.0.0.0: gateway ::1 > >>>>> Generating host.conf. > >>>>> Waiting 30s for the default route interface: .....(no carrier) > >>>>> Creating and/or trimming log files. > >>>>> Starting syslogd. > >>>>> Clearing /tmp (X related). > >>>>> Updating motd:. > >>>>> Mounting late file systems:. > >>>>> Configuring vt: blanktime. > >>>>> Generating RSA host key. > >>>>> 2048 SHA256:efid4fCpKZlmdi69b18qj+SNx2mSPQNr6ourB/w9tPw root@freebsd (RSA) > >>>>> Generating ECDSA host key. > >>>>> 256 SHA256:bpBVM0B9a3xDhmy3bvoC4OuELAJ4fvJd+p3tNwgia6k root@freebsd (ECDSA) > >>>>> Generating ED25519 host key. > >>>>> 256 SHA256:VHMKoDA1Zv50CmxiLJwTIvg58S2DuBg6zj2VFXDGq/M root@freebsd (ED25519) > >>>>> Performing sanity check on sshd configuration. > >>>>> Could not load host key: /etc/ssh/ssh_host_dsa_key > >>>>> Starting sshd. > >>>>> Could not load host key: /etc/ssh/ssh_host_dsa_key > >>>>> Starting cron. > >>>>> Starting background file system checks in 60 seconds. > >>>>> lock order reversal: > >>>>> 1st 0xc4499814 ufs (ufs) @ /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 > >>>>> 2nd 0xd90169a0 bufwait (bufwait) @ > /usr/home/emoe/Projects/ARM/src/sys/ufs/ffs/ffs_vnops.c:263 > >>>>> 3rd 0xc45c15d4 ufs (ufs) @ /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 > >>>>> stack backtrace: > >>>>> mount: /dev/mmcsd0s2: Device busy > >>>>> > >>>>> Thu Mar 31 10:49:29 UTC 2016 > >>>>> > >>>>> FreeBSD/arm (freebsd) (ttyu0) > >>>>> > >>>>> login: > >>>>> > >>>>>> On Mar 30, 2016, at 7:47 PM, Erik Moe <e.moe@rcn.com> wrote: > >>>>>> > >>>>>> I was able to build a working odroid-c1 image not too long ago. Let me pull the > latest sources and see if something has changed. > >>>>>> > >>>>>> Erik > >>>>>> > >>>>>>> On Mar 30, 2016, at 2:24 AM, Daniel Braniss <danny@cs.huji.ac.il> wrote: > >>>>>>> > >>>>>>> Hi, > >>>>>>> Managed to make a bootable SD, cross compile world/kernel, > >>>>>>> but the kernel startup gets stuck, I can’t even get into the debugger. > >>>>>>> any help/hints most welcome :-) > >>>>>>> btw, I can also boot via the network, cutting down the debug cycle considerably. > >>>>>>> thanks, > >>>>>>> danny > >>>>>>> PS: here is the console output > >>>>>>> <s1> > >>>>>>> _______________________________________________ > >>>>>>> freebsd-arm@freebsd.org mailing list > >>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >>>>>> _______________________________________________ > >>>>>> freebsd-arm@freebsd.org mailing list > >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >>>>> > >>>> > >>>> _______________________________________________ > >>>> freebsd-arm@freebsd.org mailing list > >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >>> > >> > > > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a2285c9d127c4c5f8d86b0faad365a52>