Date: Fri, 17 Jan 2003 18:48:01 +0200 From: Yury Tarasievich <grog@grsu.by> To: freebsd-hackers@freebsd.org Subject: Re: 4.7 on 2 Xeons SMP? Message-ID: <3E2833C1.2070207@grsu.by> References: <3E271197.2050207@grsu.by>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------090807000702050801040908
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Want to attract your attention once more. At my place double Xeons fails
to start (with only SMP and APIC options added to GENERIC) with
following diagnostics:
> I tried both 4.7-RELEASE srs/sys and that of January 14. That's what I
> get when booting with SMP enabled (copied from screen):
> ....
> Programming 24 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> Programming 24 pins in IOAPIC #1
> Programming 24 pins in IOAPIC #2
> AP #1 (PHY# 6) failed
> panic y/n?
> mp_lock = 00000001; cpuid = 0; lapic_id = 00000000
I'm also attaching dmesg of successful boot of GENERIC. Now, when I
looked into sources for apic initializing (where it seemingly fails),
I've thought that with some qualified guidance (by e-mail or likewise) I
could possibly try to address the problem myself. Bad news is that
machine's going to be in my "posession" for two weeks only (in case
FreeBSD+Oracle 9i combo fails to start) and that I'm practically
unacquainted with kernel debugging so coaching should come really
low-level, like in recent Dreyfus article about running IRIX binaries on
NetBSD. Good news is I have some knowledge of electronics and recognize
some concepts in source and understood almost everything in said article. :)
So would anybody be willing to spare time and knowledge?
--------------090807000702050801040908
Content-Type: text/plain;
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1794.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073217536 (1048064K bytes)
avail memory = 1039351808 (1014992K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 17 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x7000-0x701f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x7020-0x703f irq 5 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0x8000-0x80ff mem 0xfc240000-0xfc240fff irq 5 at device 2.0 on pci4
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x8800-0x883f mem 0xfc200000-0xfc21ffff,0xfc242000-0xfc242fff irq 11 at device 4.0 on pci4
fxp0: Ethernet address 00:02:b3:b0:c5:06
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x8840-0x887f mem 0xfc220000-0xfc23ffff,0xfc243000-0xfc243fff irq 11 at device 5.0 on pci4
fxp1: Ethernet address 00:02:b3:b0:c2:14
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x7040-0x704f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe3800-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <TEAC CD-552E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
--------------090807000702050801040908--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E2833C1.2070207>