Date: Mon, 20 Oct 2003 13:28:57 -0400 From: "Ken Menzel" <kenm@icarz.com> To: "Edy Lie" <email@edylie.net>, <freebsd-scsi@freebsd.org> Subject: Re: Adaptec 2100s monitoring script Message-ID: <05e401c3972f$a6916770$b2db7bd1@icarz.com> References: <20031018180559.E1E0B43F3F@mx1.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
cd /usr/ports/sysutils/asr-utils make install I then wrote a quick perl script to tie this in with nagios: Port: nagios-1.1_2 Path: /usr/ports/net/nagios If you run Nagios and want my script (check_raidutil.pl) let me know. ----------------------------- here is some sample output: kirk# raidutil -L logical Address Type Manufacturer/Model Capacity Status ---------------------------------------------------------------------- ----- d0b0t0d0 RAID 1 (Mirrored) ADAPTEC RAID-1 17366MB Optimal kirk# dmesg | grep asr asr0: <Adaptec Caching SCSI RAID> mem 0xf4000000-0xf5ffffff irq 5 at device 10.1 on pci1 asr0: major=154 asr0: ADAPTEC 2100S FW Rev. 320P, 1 channel, 256 CCBs, Protocol I2O da0 at asr0 bus 0 target 0 lun 0 da1 at asr0 bus 0 target 2 lun 0 kirk# ----- Original Message ----- From: "Edy Lie" <email@edylie.net> To: <freebsd-scsi@freebsd.org> Sent: Saturday, October 18, 2003 2:05 PM Subject: Adaptec 2100s monitoring script > Greetings, > > I am sorry if this question has been asked. I was wondering if anyone has a > good method to monitor the health of the RAID 5 using Adaptec 2100s ? > > Thank you. > Best Regards, > Ed > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?05e401c3972f$a6916770$b2db7bd1>