Date: Tue, 17 Oct 2006 01:41:41 +0100 From: Dan <fbsdlist@stormbringer.clara.co.uk> To: freebsd-stable@freebsd.org Cc: Andriy Gapon <avg@icyb.net.ua>, freebsd-hardware@freebsd.org Subject: Re: nfsmb survey Message-ID: <200610170141.41902.fbsdlist@stormbringer.clara.co.uk> In-Reply-To: <4533BE2E.4080005@icyb.net.ua> References: <4533BE2E.4080005@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 16 October 2006 18:15, Andriy Gapon wrote:
> In STABLE and upcoming 6.2 (and in CURRENT, of course) there is a new
> SMB driver for NForce2/3/4 chipsets, nfsmb, developed by Ruslan
> Ermilov. However, the driver doesn't currently work on all hardware
> that it is to support. The problem is with choosing proper BAR
> registers, which, as it seems, might be different for different
> chipsets/SMB controllers.
>
> If you have a system based on NForce2/3/4, could you please share the
> following information:
>
> 1. find out pci handle of your SMB controller:
> $ pciconf -l | fgrep 0x0c0500
> and also note chip field value, it should match 00(64|84|d4|e4|52)10de.
> E.g.:
> nfsmb0@pci0:1:1: class=0x0c0500 card=0x1c02147b chip=0x006410de
> rev=0xa2 hdr=0x00
(root)# uname -a
FreeBSD storm 6.1-STABLE FreeBSD 6.1-STABLE #1: Mon May 22 23:55:36 BST
2006 root@storm:/usr/obj/usr/src/sys/GENERIC i386
(root)# pciconf -lv | fgrep 0x0c0500 -A 4
none1@pci0:1:1: class=0x0c0500 card=0x0c111458 chip=0x005210de rev=0xa2
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 SMBus'
class = serial bus
subclass = SMBus
> 2. read values in BARs 4 and 5 and also registers 0x50 and 0x54 like
> follows:
> $ pciconf -r pci0:1:1 0x20
> $ pciconf -r pci0:1:1 0x24
> $ pciconf -r pci0:1:1 0x50
> $ pciconf -r pci0:1:1 0x54
(root)# pciconf -r pci0:1:1 0x20
00001c01
(root)# pciconf -r pci0:1:1 0x24
00001c41
(root)# pciconf -r pci0:1:1 0x50
00001c01
(root)# pciconf -r pci0:1:1 0x54
00001c41
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610170141.41902.fbsdlist>