Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Sep 2006 15:04:17 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        YAMAMOTO Shigeru <shigeru@iij.ad.jp>
Cc:        freebsd-current@FreeBSD.org
Subject:   Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.
Message-ID:  <20060927060417.GH5975@cdnetworks.co.kr>
In-Reply-To: <20060927.145600.127212419.shigeru@iij.ad.jp>
References:  <20060926121707.GC5975@cdnetworks.co.kr> <20060927.141621.78040393.shigeru@iij.ad.jp> <20060927052512.GG5975@cdnetworks.co.kr> <20060927.145600.127212419.shigeru@iij.ad.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Sep 27, 2006 at 02:56:00PM +0900, YAMAMOTO Shigeru wrote:
 > 
 > >>>>> "Pyun" == Pyun YongHyeon <pyunyh@gmail.com> writes:
 > Pyun> Thanks a lot. Would you let me know what PHY driver was attached to
 > Pyun> your NIC? If ukphy(4) was used for the NIC I'd like to know PHY model
 > Pyun> number.
 > 
 > On my PC, e1000phy is used, not ukphy.
 > 
 > I send a part of dmesg.
 > 
 > mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xdfdfc000-0xdfdfffff irq 17 at device 0.0 on pci2
 > msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
 > msk0: Ethernet address: 00:13:d4:fa:42:8a
 > miibus1: <MII bus> on msk0
 > e1000phy1: <Marvell 88E1111 Gigabit PHY> on miibus1
 > e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 > mskc0: [FAST]
 > msk0: link state changed to DOWN
 > msk0: link state changed to UP
 > 

It looks ok. Thanks again for reporting.

-- 
Regards,
Pyun YongHyeon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060927060417.GH5975>