Date: Mon, 28 Mar 2005 21:26:49 +0200 From: Olivier Gautherot <olivier@gautherot.net> To: freebsd-hardware@freebsd.org Cc: Carlos Silva <full-disclosure@csilva.org> Subject: Re: USB 2.0 problem Message-ID: <200503282126.50500.olivier@gautherot.net> In-Reply-To: <424858B3.7020001@csilva.org> References: <423F5D07.4030008@myrealbox.com> <424015B0.3010608@csilva.org> <424858B3.7020001@csilva.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Carlos! > The latest version (5.4-PRERELEASE) doesn't worked. It stills at 1MB/s. > Anyone with ideas? Try "usbdevs -v" and check whether your USB bridge is recognized as EHCI. Your chipset maynot be fully supported... Olivier > > Regards, > Carlos > > Carlos Silva aka|Danger_Man| wrote: > > Hi, > > > > 5.2.1-RELEASE-p13 > > > > Thanks, I'll try the latest version. > > > > Best Regards, > > > > Carlos > > > > Edwin Ringersma wrote: > >> Hi, > >> > >> What version are you running ? > >> It's a known problem. > >> I'm testing with the latest 5 version (5.4 prerelease) and now it's > >> reporting the USB 2.0 device on an intel based motherboard as 40MB/s. > >> (with 5.3 it was reported as 1.0MB/s) > >> So it looks like the support for USB 2.0 has improved from 5.3 . > >> > >> regards, > >> Edwin Ringersma > >> Date sent: Mon, 21 Mar 2005 23:55:11 +0000 > >> From: Carlos Silva aka|Danger_Man| > >> <full-disclosure@csilva.org> > >> To: freebsd-hardware@freebsd.org > >> Subject: Re: USB 2.0 problem > >> > >>> Carlos Jorge Santos wrote: > >>>> Hi, > >>>> > >>>> You're probably using USB 1.1 driver instead of USB 2.0. > >>>> To enable USB 2.0 you have to recompile your kernel with : > >>>> > >>>> device ehci > >>>> > >>>> Take a look at : > >>>> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/usb-disks.ht > >>>>ml > >>>> > >>>> > >>>> Best Regards > >>>> Carlos Santos (Portugal) :-) > >>> > >>> No, I've compiled the kernel with ehci (eg. usb3: USB revision 2.0 ) > >>> > >>> :-) > >>> > >>> regards, > >>> > >>> Carlos Silv (Portugal too) > >>> > >>>> Carlos Silva aka|Danger_Man| wrote: > >>>>> Hi dudes, > >>>>> > >>>>> I have a little problem with my external disk drive, my data > >>>>> transfer rate is 1.000MB/s. > >>>>> I have USB 2.0 so the rate is larger, right? > >>>>> Somebody has an idea how to enlarge the rate? > >>>>> > >>>>> Regards, > >>>>> > >>>>> Carlos > >>>>> > >>>>> > >>>>> osiris# dmesg | grep usb && dmesg | grep da0 > >>>>> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > >>>>> usb0: USB revision 1.0 > >>>>> usb1: <VIA 83C572 USB controller> on uhci1 > >>>>> usb1: USB revision 1.0 > >>>>> usb2: <VIA 83C572 USB controller> on uhci2 > >>>>> usb2: USB revision 1.0 > >>>>> ehci_pci_attach: companion usb1 > >>>>> ehci_pci_attach: companion usb2 > >>>>> usb3: EHCI version 0.95 > >>>>> usb3: companion controllers, 2 ports each: usb1 usb2 > >>>>> usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > >>>>> usb3: USB revision 2.0 > >>>>> GEOM: create disk da0 dp=0xc2d96850 > >>>>> da0 at umass-sim0 bus 0 target 0 lun 0 > >>>>> da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device > >>>>> da0: 1.000MB/s transfers > >>>>> da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C) > >>>>> osiris# > >>>>> > >>>>> osiris# usbdevs > >>>>> addr 1: UHCI root hub, Intel > >>>>> addr 1: UHCI root hub, VIA > >>>>> addr 1: UHCI root hub, VIA > >>>>> addr 2: USB 2.0 Storage Device, Acer Labs > >>>>> addr 1: EHCI root hub, (0x1106) > >>>>> osiris# > >>>>> > >>>>> osiris# camcontrol devlist > >>>>> <USB 2.0 Storage Device 0100> at scbus0 target 0 lun 0 > >>>>> (da0,pass0) > >>>>> osiris# > >>> > >>> _______________________________________________ > >>> freebsd-hardware@freebsd.org mailing list > >>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > >>> To unsubscribe, send any mail to > >>> "freebsd-hardware-unsubscribe@freebsd.org" > > > > _______________________________________________ > > freebsd-hardware@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > > To unsubscribe, send any mail to > > "freebsd-hardware-unsubscribe@freebsd.org" > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" -- Olivier Gautherot Tel: 0688 380 434 (intl) +33 688 380 434 olivier@gautherot.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200503282126.50500.olivier>