Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Jun 2012 08:02:17 +0200
From:      vermaden <vermaden@interia.pl>
To:        guru@unixarea.de, mike@sentex.net
Cc:        freebsd-questions@freebsd.org
Subject:   Re: umodem/ppp/3g stopped working after update from 9.0-RELEASE to 9-STABLE
Message-ID:  <kbwzpfzegdfzkxyrhfmo@rnfz>
In-Reply-To: <20120628185809.GA1107@tiny.Sisis.de>
References:  <orbevfsodiahrtleagth@uazf> <20120628185809.GA1107@tiny.Sisis.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

> Did it perhaps create more serial ports for you that were
> not there before  ?  What is the output of ls -l /dev/cuaU*
>=20
> 	---Mike

# ls -l /dev/cuaU*
crw-rw----  1 uucp  dialer    0, 155 2012.06.29 06:42 /dev/cuaU0
crw-rw----  1 uucp  dialer    0, 156 2012.06.29 06:42 /dev/cuaU0.init
crw-rw----  1 uucp  dialer    0, 157 2012.06.29 06:42 /dev/cuaU0.lock
crw-rw----  1 uucp  dialer    0, 161 2012.06.29 07:55 /dev/cuaU1
crw-rw----  1 uucp  dialer    0, 162 2012.06.29 06:42 /dev/cuaU1.init
crw-rw----  1 uucp  dialer    0, 163 2012.06.29 06:42 /dev/cuaU1.lock

I have tried both cuaU0 and cuaU1 but same result.



> I said this already: the /etc/ppp/ppp.conf file you are
> using is completely broken and the log matches this;
>=20
> what should these AT cmds do in the section of 3g:
>=20
> 3g:
> set device /dev/cuaU0
> set speed 38400
> set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
> add default HISADDR
> term
> AT+CFUN=3D1
> AT+CGDCONT=3D1,"IP","www.plusgsm.pl"
> ATD*99#
>=20
> 	matthias

I did not knew that its broken, I used the '3g'
profile to connect, like that: # ppp -ddial 3g

It worked very well without errors on 9.0-RELEASE
and it stopped working after the update to the
9-STABLE, what is broken there?

Regards,
vermaden
--=20








































...



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?kbwzpfzegdfzkxyrhfmo>