Date: Wed, 23 Jan 2013 15:07:15 +0000 (UTC) From: Anton Yuzhaninov <citrin@citrin.ru> To: freebsd-questions@freebsd.org Subject: Re: IPMI SOL setup on FreeBSD 9.1 amd64 supermicro X9SCM-F/X9CL-F Message-ID: <kdoub2$r18$1@ger.gmane.org> References: <6.0.0.22.2.20130121123250.067f3158@mail.computinginnovations.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 21 Jan 2013 22:52:17, Derek Ragona wrote: DR> I have a couple servers that are built using the supermicro X9SCM-F/X9CL-F DR> motherboards, and I can't quite get IPMI SOL working right. DR> DR> These motherboards have 3 NIC's. One NIC is for a dedicated IPMI interface. DR> DR> I have both servers configured to use the dedicated IPMI NIC and these DR> NIC's are plugged into a separate unmanaged switch. DR> DR> Both systems boards are set to redirect com1. I changed /etc/ttys to run a DR> getty on /dev/ttyu0. I have com1 configured to 115,200 baud, 8, n, 1, no DR> flowcontrol in the BIOS. I in have /etc/ttys: DR> ttyu0 "/usr/libexec/getty std.115200" vt100 on secure /etc/ttys: ttyu1 "/usr/libexec/getty std.115200" vt100 on secure /boot/loader.conf: hint.uart.0.flags="0" hint.uart.1.flags="0x10" boot_serial="YES" boot_multicons="YES" comconsole_speed="115200" console="comconsole vidconsole" -- Anton Yuzhaninov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?kdoub2$r18$1>