From owner-svn-src-stable@FreeBSD.ORG Sat Dec 19 05:05:14 2009 Return-Path: Delivered-To: svn-src-stable@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 775531065672; Sat, 19 Dec 2009 05:05:14 +0000 (UTC) (envelope-from nyan@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c]) by mx1.freebsd.org (Postfix) with ESMTP id 6419F8FC0A; Sat, 19 Dec 2009 05:05:14 +0000 (UTC) Received: from svn.freebsd.org (localhost [127.0.0.1]) by svn.freebsd.org (8.14.3/8.14.3) with ESMTP id nBJ55EYg020558; Sat, 19 Dec 2009 05:05:14 GMT (envelope-from nyan@svn.freebsd.org) Received: (from nyan@localhost) by svn.freebsd.org (8.14.3/8.14.3/Submit) id nBJ55EaZ020555; Sat, 19 Dec 2009 05:05:14 GMT (envelope-from nyan@svn.freebsd.org) Message-Id: <200912190505.nBJ55EaZ020555@svn.freebsd.org> From: Takahashi Yoshihiro Date: Sat, 19 Dec 2009 05:05:14 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-6@freebsd.org X-SVN-Group: stable-6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Subject: svn commit: r200707 - stable/6/sys/boot/pc98/btx/btx X-BeenThere: svn-src-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SVN commit messages for all the -stable branches of the src tree List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 19 Dec 2009 05:05:14 -0000 Author: nyan Date: Sat Dec 19 05:05:14 2009 New Revision: 200707 URL: http://svn.freebsd.org/changeset/base/200707 Log: MFC: r176645 and r200254 - Retire the support for using paging in BTX. - Use real mode instead of v86 mode. Modified: stable/6/sys/boot/pc98/btx/btx/Makefile stable/6/sys/boot/pc98/btx/btx/btx.S Directory Properties: stable/6/sys/ (props changed) stable/6/sys/contrib/pf/ (props changed) stable/6/sys/dev/cxgb/ (props changed) Modified: stable/6/sys/boot/pc98/btx/btx/Makefile ============================================================================== --- stable/6/sys/boot/pc98/btx/btx/Makefile Sat Dec 19 05:00:09 2009 (r200706) +++ stable/6/sys/boot/pc98/btx/btx/Makefile Sat Dec 19 05:05:14 2009 (r200707) @@ -5,10 +5,6 @@ INTERNALPROG= NO_MAN= SRCS= btx.S -.if defined(PAGING) -CFLAGS+=-DPAGING -.endif - .if defined(BOOT_BTX_NOHANG) BOOT_BTX_FLAGS=0x1 .else Modified: stable/6/sys/boot/pc98/btx/btx/btx.S ============================================================================== --- stable/6/sys/boot/pc98/btx/btx/btx.S Sat Dec 19 05:00:09 2009 (r200706) +++ stable/6/sys/boot/pc98/btx/btx/btx.S Sat Dec 19 05:05:14 2009 (r200707) @@ -21,12 +21,11 @@ .set MEM_BTX,0x1000 # Start of BTX memory .set MEM_ESP0,0x1800 # Supervisor stack .set MEM_BUF,0x1800 # Scratch buffer - .set MEM_ESP1,0x1e00 # Link stack - .set MEM_IDT,0x1e00 # IDT - .set MEM_TSS,0x1f98 # TSS - .set MEM_MAP,0x2000 # I/O bit map - .set MEM_DIR,0x4000 # Page directory - .set MEM_TBL,0x5000 # Page tables + .set MEM_ESPR,0x5e00 # Real mode stack + .set MEM_IDT,0x5e00 # IDT + .set MEM_TSS,0x5f98 # TSS + .set MEM_MAP,0x6000 # I/O bit map + .set MEM_TSS_END,0x7fff # End of TSS .set MEM_ORG,0x9000 # BTX code .set MEM_USR,0xa000 # Start of user memory /* @@ -35,6 +34,14 @@ .set PAG_SIZ,0x1000 # Page size .set PAG_CNT,0x1000 # Pages to map /* + * Fields in %eflags. + */ + .set PSL_RESERVED_DEFAULT,0x00000002 + .set PSL_T,0x00000100 # Trap flag + .set PSL_I,0x00000200 # Interrupt enable flag + .set PSL_VM,0x00020000 # Virtual 8086 mode flag + .set PSL_AC,0x00040000 # Alignment check flag +/* * Segment selectors. */ .set SEL_SCODE,0x8 # Supervisor code @@ -49,7 +56,6 @@ */ .set TSS_ESP0,0x4 # PL 0 ESP .set TSS_SS0,0x8 # PL 0 SS - .set TSS_ESP1,0xc # PL 1 ESP .set TSS_MAP,0x66 # I/O bit map base /* * System calls. @@ -57,10 +63,20 @@ .set SYS_EXIT,0x0 # Exit .set SYS_EXEC,0x1 # Exec /* - * V86 constants. + * Fields in V86 interface structure. */ - .set V86_FLG,0x208eff # V86 flag mask - .set V86_STK,0x400 # V86 stack allowance + .set V86_CTL,0x0 # Control flags + .set V86_ADDR,0x4 # Int number/address + .set V86_ES,0x8 # V86 ES + .set V86_DS,0xc # V86 DS + .set V86_FS,0x10 # V86 FS + .set V86_GS,0x14 # V86 GS +/* + * V86 control flags. + */ + .set V86F_ADDR,0x10000 # Segment:offset address + .set V86F_CALLF,0x20000 # Emulate far call + .set V86F_FLAGS,0x40000 # Return flags /* * Dump format control bytes. */ @@ -78,15 +94,13 @@ * BIOS Data Area locations. */ .set BDA_MEM,0x501 # Free memory - .set BDA_KEYFLAGS,0x53a # Keyboard shift-state flags .set BDA_POS,0x53e # Cursor position /* * Derivations, for brevity. */ .set _ESP0H,MEM_ESP0>>0x8 # Byte 1 of ESP0 - .set _ESP1H,MEM_ESP1>>0x8 # Byte 1 of ESP1 .set _TSSIO,MEM_MAP-MEM_TSS # TSS I/O base - .set _TSSLM,MEM_DIR-MEM_TSS-1 # TSS limit + .set _TSSLM,MEM_TSS_END-MEM_TSS # TSS limit .set _IDTLM,MEM_TSS-MEM_IDT-1 # IDT limit /* * Code segment. @@ -101,7 +115,7 @@ btx_hdr: .byte 0xeb # Machine ID .byte 0xe # Header size .ascii "BTX" # Magic .byte 0x1 # Major version - .byte 0x1 # Minor version + .byte 0x2 # Minor version .byte BTX_FLAGS # Flags .word PAG_CNT-MEM_ORG>>0xc # Paging control .word break-start # Text size @@ -122,13 +136,24 @@ init: cli # Disable interrupts */ mov $MEM_IDT,%di # Memory to initialize mov $(MEM_ORG-MEM_IDT)/2,%cx # Words to zero - push %di # Save rep # Zero-fill stosw # memory - pop %di # Restore +/* + * Update real mode IDT for reflecting hardware interrupts. + */ + mov $intr20,%bx # Address first handler + mov $0x10,%cx # Number of handlers + mov $0x20*4,%di # First real mode IDT entry +init.0: mov %bx,(%di) # Store IP + inc %di # Address next + inc %di # entry + stosw # Store CS + add $4,%bx # Next handler + loop init.0 # Next IRQ /* * Create IDT. */ + mov $MEM_IDT,%di mov $idtctl,%si # Control string init.1: lodsb # Get entry cbw # count @@ -154,60 +179,16 @@ init.3: lea 0x8(%di),%di # Next entry */ init.4: movb $_ESP0H,TSS_ESP0+1(%di) # Set ESP0 movb $SEL_SDATA,TSS_SS0(%di) # Set SS0 - movb $_ESP1H,TSS_ESP1+1(%di) # Set ESP1 movb $_TSSIO,TSS_MAP(%di) # Set I/O bit map base -#ifdef PAGING -/* - * Create page directory. - */ - xor %edx,%edx # Page - mov $PAG_SIZ>>0x8,%dh # size - xor %eax,%eax # Zero - mov $MEM_DIR,%di # Page directory - mov $PAG_CNT>>0xa,%cl # Entries - mov $MEM_TBL|0x7,%ax # First entry -init.5: stosl # Write entry - add %dx,%ax # To next - loop init.5 # Till done -/* - * Create page tables. - */ - mov $MEM_TBL,%di # Page table - mov $PAG_CNT>>0x8,%ch # Entries - xor %ax,%ax # Start address -init.6: mov $0x7,%al # Set U:W:P flags - cmp btx_hdr+0x8,%cx # Standard user page? - jb init.7 # Yes - cmp $PAG_CNT-MEM_BTX>>0xc,%cx # BTX memory? - jae init.7 # No or first page - and $~0x2,%al # Clear W flag - cmp $PAG_CNT-MEM_USR>>0xc,%cx # User page zero? - jne init.7 # No - testb $0x80,btx_hdr+0x7 # Unmap it? - jz init.7 # No - and $~0x1,%al # Clear P flag -init.7: stosl # Set entry - add %edx,%eax # Next address - loop init.6 # Till done -#endif /* * Bring up the system. */ mov $0x2820,%bx # Set protected mode callw setpic # IRQ offsets lidt idtdesc # Set IDT -#ifdef PAGING - xor %eax,%eax # Set base - mov $MEM_DIR>>0x8,%ah # of page - mov %eax,%cr3 # directory -#endif lgdt gdtdesc # Set GDT mov %cr0,%eax # Switch to protected -#ifdef PAGING - or $0x80000001,%eax # mode and enable paging -#else inc %ax # mode -#endif mov %eax,%cr0 # ljmp $SEL_SCODE,$init.8 # To 32-bit code .code32 @@ -297,8 +278,8 @@ exit.2: xor %ax,%ax # Real mode segme exit.3: jz exit.3 # No movb $0xa0,%al outb %al,$0x35 - movb 0,%al - outb %al,$0xf0 + movb $0x00,%al + outb %al,$0xf0 # reboot the machine exit.4: jmp exit.4 /* * Set IRQ offsets by reprogramming 8259A PICs. @@ -329,10 +310,6 @@ setpic: in $0x02,%al # Save master retw # To caller .code32 /* - * Initiate return from V86 mode to user mode. - */ -inthlt: hlt # To supervisor mode -/* * Exception jump table. */ intx00: push $0x0 # Int 0x0: #DE @@ -358,18 +335,12 @@ intx00: push $0x0 # Int 0x0: #DE push $0xc # Int 0xc: #SS jmp except # Stack segment fault push $0xd # Int 0xd: #GP - jmp ex_v86 # General protection + jmp except # General protection push $0xe # Int 0xe: #PF jmp except # Page fault intx10: push $0x10 # Int 0x10: #MF jmp ex_noc # Floating-point error /* - * Handle #GP exception. - */ -ex_v86: testb $0x2,0x12(%esp,1) # V86 mode? - jz except # No - jmp v86mon # To monitor -/* * Save a zero error code. */ ex_noc: pushl (%esp,1) # Duplicate int no @@ -381,24 +352,17 @@ except: cld # String ops inc pushl %ds # Save pushl %es # most pusha # registers - movb $0x6,%al # Push loop count - testb $0x2,0x3a(%esp,1) # V86 mode? - jnz except.1 # Yes pushl %gs # Set GS pushl %fs # Set FS pushl %ds # Set DS pushl %es # Set ES - movb $0x2,%al # Push loop count cmpw $SEL_SCODE,0x44(%esp,1) # Supervisor mode? jne except.1 # No pushl %ss # Set SS - leal 0x50(%esp,1),%eax # Set - pushl %eax # ESP jmp except.2 # Join common code -except.1: pushl 0x50(%esp,1) # Set GS, FS, DS, ES - decb %al # (if V86 mode), and - jne except.1 # SS, ESP -except.2: push $SEL_SDATA # Set up +except.1: pushl 0x50(%esp,1) # Set SS +except.2: pushl 0x50(%esp,1) # Set ESP + push $SEL_SDATA # Set up popl %ds # to pushl %ds # address popl %es # data @@ -407,14 +371,12 @@ except.2: push $SEL_SDATA # Set up movl $MEM_BUF,%edi # Buffer pushl %eax pushl %edx -wait.1: - inb $0x60,%al +wait.1: inb $0x60,%al testb $0x04,%al jz wait.1 movb $0xe0,%al outb %al,$0x62 -wait.2: - inb $0x60,%al +wait.2: inb $0x60,%al testb $0x01,%al jz wait.2 xorl %edx,%edx @@ -443,237 +405,11 @@ wait.2: je except.3 # Yes cmpb $0x1,(%esp,1) # Debug? jne except.2a # No - testl $0x100,0x10(%esp,1) # Trap flag set? + testl $PSL_T,0x10(%esp,1) # Trap flag set? jnz except.3 # Yes except.2a: jmp exit # Exit except.3: leal 0x8(%esp,1),%esp # Discard err, int no iret # From interrupt -/* - * Return to user mode from V86 mode. - */ -intrtn: cld # String ops inc - pushl %ds # Address - popl %es # data - leal 0x3c(%ebp),%edx # V86 Segment registers - movl MEM_TSS+TSS_ESP1,%esi # Link stack pointer - lodsl # INT_V86 args pointer - movl %esi,%ebx # Saved exception frame - testl %eax,%eax # INT_V86 args? - jz intrtn.2 # No - movl $MEM_USR,%edi # User base - movl 0x1c(%esi),%ebx # User ESP - movl %eax,(%edi,%ebx,1) # Restore to user stack - leal 0x8(%edi,%eax,1),%edi # Arg segment registers - testb $0x4,-0x6(%edi) # Return flags? - jz intrtn.1 # No - movl 0x30(%ebp),%eax # Get V86 flags - movw %ax,0x18(%esi) # Set user flags -intrtn.1: leal 0x10(%esi),%ebx # Saved exception frame - xchgl %edx,%esi # Segment registers - movb $0x4,%cl # Update seg regs - rep # in INT_V86 - movsl # args -intrtn.2: xchgl %edx,%esi # Segment registers - leal 0x28(%ebp),%edi # Set up seg - movb $0x4,%cl # regs for - rep # later - movsl # pop - xchgl %ebx,%esi # Restore exception - movb $0x5,%cl # frame to - rep # supervisor - movsl # stack - movl %esi,MEM_TSS+TSS_ESP1 # Link stack pointer - popa # Restore - leal 0x8(%esp,1),%esp # Discard err, int no - popl %es # Restore - popl %ds # user - popl %fs # segment - popl %gs # registers - iret # To user mode -/* - * V86 monitor. - */ -v86mon: cld # String ops inc - pushl $SEL_SDATA # Set up for - popl %ds # flat addressing - pusha # Save registers - movl %esp,%ebp # Address stack frame - movzwl 0x2c(%ebp),%edi # Load V86 CS - shll $0x4,%edi # To linear - movl 0x28(%ebp),%esi # Load V86 IP - addl %edi,%esi # Code pointer - xorl %ecx,%ecx # Zero - movb $0x2,%cl # 16-bit operands - xorl %eax,%eax # Zero -v86mon.1: lodsb # Get opcode - cmpb $0x66,%al # Operand size prefix? - jne v86mon.2 # No - movb $0x4,%cl # 32-bit operands - jmp v86mon.1 # Continue -v86mon.2: cmpb $0xf4,%al # HLT? - jne v86mon.3 # No - cmpl $inthlt+0x1,%esi # Is inthlt? - jne v86mon.7 # No (ignore) - jmp intrtn # Return to user mode -v86mon.3: cmpb $0xf,%al # Prefixed instruction? - jne v86mon.4 # No - cmpb $0x09,(%esi) # Is it a WBINVD? - je v86wbinvd # Yes - cmpb $0x30,(%esi) # Is it a WRMSR? - je v86wrmsr # Yes - cmpb $0x32,(%esi) # Is it a RDMSR? - je v86rdmsr # Yes - cmpb $0x20,(%esi) # Is this a MOV reg,CRx? - je v86mov # Yes -v86mon.4: cmpb $0xfa,%al # CLI? - je v86cli # Yes - cmpb $0xfb,%al # STI? - je v86sti # Yes - movzwl 0x38(%ebp),%ebx # Load V86 SS - shll $0x4,%ebx # To offset - pushl %ebx # Save - addl 0x34(%ebp),%ebx # Add V86 SP - movl 0x30(%ebp),%edx # Load V86 flags - cmpb $0x9c,%al # PUSHF/PUSHFD? - je v86pushf # Yes - cmpb $0x9d,%al # POPF/POPFD? - je v86popf # Yes - cmpb $0xcd,%al # INT imm8? - je v86intn # Yes - cmpb $0xcf,%al # IRET/IRETD? - je v86iret # Yes - popl %ebx # Restore - popa # Restore - jmp except # Handle exception -v86mon.5: movl %edx,0x30(%ebp) # Save V86 flags -v86mon.6: popl %edx # V86 SS adjustment - subl %edx,%ebx # Save V86 - movl %ebx,0x34(%ebp) # SP -v86mon.7: subl %edi,%esi # From linear - movl %esi,0x28(%ebp) # Save V86 IP - popa # Restore - leal 0x8(%esp,1),%esp # Discard int no, error - iret # To V86 mode -/* - * Emulate MOV reg,CRx. - */ -v86mov: movb 0x1(%esi),%bl # Fetch Mod R/M byte - testb $0x10,%bl # Read CR2 or CR3? - jnz v86mov.1 # Yes - movl %cr0,%eax # Read CR0 - testb $0x20,%bl # Read CR4 instead? - jz v86mov.2 # No - movl %cr4,%eax # Read CR4 - jmp v86mov.2 -v86mov.1: movl %cr2,%eax # Read CR2 - testb $0x08,%bl # Read CR3 instead? - jz v86mov.2 # No - movl %cr3,%eax # Read CR3 -v86mov.2: andl $0x7,%ebx # Compute offset in - shl $2,%ebx # frame of destination - neg %ebx # register - movl %eax,0x1c(%ebp,%ebx,1) # Store CR to reg - incl %esi # Adjust IP -/* - * Return from emulating a 0x0f prefixed instruction - */ -v86preret: incl %esi # Adjust IP - jmp v86mon.7 # Finish up -/* - * Emulate WBINVD - */ -v86wbinvd: wbinvd # Write back and invalidate - # cache - jmp v86preret # Finish up -/* - * Emulate WRMSR - */ -v86wrmsr: movl 0x18(%ebp),%ecx # Get user's %ecx (MSR to write) - movl 0x14(%ebp),%edx # Load the value - movl 0x1c(%ebp),%eax # to write - wrmsr # Write MSR - jmp v86preret # Finish up -/* - * Emulate RDMSR - */ -v86rdmsr: movl 0x18(%ebp),%ecx # MSR to read - rdmsr # Read the MSR - movl %eax,0x1c(%ebp) # Return the value of - movl %edx,0x14(%ebp) # the MSR to the user - jmp v86preret # Finish up -/* - * Emulate CLI. - */ -v86cli: andb $~0x2,0x31(%ebp) # Clear IF - jmp v86mon.7 # Finish up -/* - * Emulate STI. - */ -v86sti: orb $0x2,0x31(%ebp) # Set IF - jmp v86mon.7 # Finish up -/* - * Emulate PUSHF/PUSHFD. - */ -v86pushf: subl %ecx,%ebx # Adjust SP - cmpb $0x4,%cl # 32-bit - je v86pushf.1 # Yes - data16 # 16-bit -v86pushf.1: movl %edx,(%ebx) # Save flags - jmp v86mon.6 # Finish up -/* - * Emulate IRET/IRETD. - */ -v86iret: movzwl (%ebx),%esi # Load V86 IP - movzwl 0x2(%ebx),%edi # Load V86 CS - leal 0x4(%ebx),%ebx # Adjust SP - movl %edi,0x2c(%ebp) # Save V86 CS - xorl %edi,%edi # No ESI adjustment -/* - * Emulate POPF/POPFD (and remainder of IRET/IRETD). - */ -v86popf: cmpb $0x4,%cl # 32-bit? - je v86popf.1 # Yes - movl %edx,%eax # Initialize - data16 # 16-bit -v86popf.1: movl (%ebx),%eax # Load flags - addl %ecx,%ebx # Adjust SP - andl $V86_FLG,%eax # Merge - andl $~V86_FLG,%edx # the - orl %eax,%edx # flags - jmp v86mon.5 # Finish up -/* - * trap int 15, function 87 - * reads %es:%si from saved registers on stack to find a GDT containing - * source and destination locations - * reads count of words from saved %cx - * returns success by setting %ah to 0 - */ -int15_87: pushl %esi # Save - pushl %edi # registers - movl 0x3C(%ebp),%edi # Load ES - movzwl 0x4(%ebp),%eax # Load user's SI - shll $0x4,%edi # EDI = (ES << 4) + - addl %eax,%edi # SI - movl 0x11(%edi),%eax # Read base of - movb 0x17(%edi),%al # GDT entry - ror $8,%eax # for source - xchgl %eax,%esi # into %esi - movl 0x19(%edi),%eax # Read base of - movb 0x1f(%edi),%al # GDT entry for - ror $8,%eax # destination - xchgl %eax,%edi # into %edi - pushl %ds # Make: - popl %es # es = ds - movzwl 0x18(%ebp),%ecx # Get user's CX - shll $0x1,%ecx # Convert count from words - rep # repeat... - movsb # perform copy. - popl %edi # Restore - popl %esi # registers - movb $0x0,0x1d(%ebp) # set ah = 0 to indicate - # success - andb $0xfe,%dl # clear CF - jmp v86mon.5 # Finish up /* * Reboot the machine by setting the reboot flag and exiting @@ -682,36 +418,7 @@ reboot: orb $0x1,btx_hdr+0x7 # Set the jmp exit # Terminate BTX and reboot /* - * Emulate INT imm8... also make sure to check if it's int 15/87 - */ -v86intn: lodsb # Get int no - cmpb $0x19,%al # is it int 19? - je reboot # yes, reboot the machine - cmpb $0x15,%al # is it int 15? - jne v86intn.1 # no, skip parse - cmpb $0x87,0x1d(%ebp) # is it the memcpy subfunction? - je int15_87 # yes - cmpw $0x4f53,0x1c(%ebp) # is it the delete key callout? - jne v86intn.1 # no, handle the int normally - movb BDA_KEYFLAGS,%ch # get the shift key state - andb $0x18,%ch # mask off just Ctrl and Alt - cmpb $0x18,%ch # are both Ctrl and Alt down? - je reboot # yes, reboot the machine -v86intn.1: subl %edi,%esi # From - shrl $0x4,%edi # linear - movw %dx,-0x2(%ebx) # Save flags - movw %di,-0x4(%ebx) # Save CS - leal -0x6(%ebx),%ebx # Adjust SP - movw %si,(%ebx) # Save IP - shll $0x2,%eax # Scale - movzwl (%eax),%esi # Load IP - movzwl 0x2(%eax),%edi # Load CS - movl %edi,0x2c(%ebp) # Save CS - xorl %edi,%edi # No ESI adjustment - andb $~0x1,%dh # Clear TF - jmp v86mon.5 # Finish up -/* - * Hardware interrupt jump table. + * Protected Mode Hardware interrupt jump table. */ intx20: push $0x8 # Int 0x20: IRQ0 jmp int_hw # V86 int 0x8 @@ -745,127 +452,267 @@ intx20: push $0x8 # Int 0x20: IRQ0 jmp int_hw # V86 int 0x16 push $0x17 # Int 0x2f: IRQ15 jmp int_hw # V86 int 0x17 + +/* + * Invoke real mode interrupt/function call from user mode with arguments. + */ +intx31: pushl $-1 # Dummy int no for btx_v86 /* - * Reflect hardware interrupts. + * Invoke real mode interrupt/function call from protected mode. + * + * We place a trampoline on the user stack that will return to rret_tramp + * which will reenter protected mode and then finally return to the user + * client. + * + * Kernel frame %esi points to: Real mode stack frame at MEM_ESPR: + * + * -0x00 user %ss -0x04 kernel %esp (with full frame) + * -0x04 user %esp -0x08 btx_v86 pointer + * -0x08 user %eflags -0x0c flags (only used if interrupt) + * -0x0c user %cs -0x10 real mode CS:IP return trampoline + * -0x10 user %eip -0x12 real mode flags + * -0x14 int no -0x16 real mode CS:IP (target) + * -0x18 %eax + * -0x1c %ecx + * -0x20 %edx + * -0x24 %ebx + * -0x28 %esp + * -0x2c %ebp + * -0x30 %esi + * -0x34 %edi + * -0x38 %gs + * -0x3c %fs + * -0x40 %ds + * -0x44 %es + * -0x48 zero %eax (hardware int only) + * -0x4c zero %ecx (hardware int only) + * -0x50 zero %edx (hardware int only) + * -0x54 zero %ebx (hardware int only) + * -0x58 zero %esp (hardware int only) + * -0x5c zero %ebp (hardware int only) + * -0x60 zero %esi (hardware int only) + * -0x64 zero %edi (hardware int only) + * -0x68 zero %gs (hardware int only) + * -0x6c zero %fs (hardware int only) + * -0x70 zero %ds (hardware int only) + * -0x74 zero %es (hardware int only) */ -int_hw: testb $0x2,0xe(%esp,1) # V86 mode? - jz intusr # No - pushl $SEL_SDATA # Address - popl %ds # data - xchgl %eax,(%esp,1) # Swap EAX, int no - pushl %ebp # Address - movl %esp,%ebp # stack frame - pushl %ebx # Save - shll $0x2,%eax # Get int - movl (%eax),%eax # vector - subl $0x6,0x14(%ebp) # Adjust V86 ESP - movzwl 0x18(%ebp),%ebx # V86 SS - shll $0x4,%ebx # * 0x10 - addl 0x14(%ebp),%ebx # + V86 ESP - xchgw %ax,0x8(%ebp) # Swap V86 IP - rorl $0x10,%eax # Swap words - xchgw %ax,0xc(%ebp) # Swap V86 CS - roll $0x10,%eax # Swap words - movl %eax,(%ebx) # CS:IP for IRET - movl 0x10(%ebp),%eax # V86 flags - movw %ax,0x4(%ebx) # Flags for IRET - andb $~0x3,0x11(%ebp) # Clear IF, TF - popl %ebx # Restore - popl %ebp # saved - popl %eax # registers - iret # To V86 mode -/* - * Invoke V86 interrupt from user mode, with arguments. - */ -intx31: stc # Have btx_v86 - pushl %eax # Missing int no -/* - * Invoke V86 interrupt from user mode. - */ -intusr: std # String ops dec - pushl %eax # Expand - pushl %eax # stack - pushl %eax # frame - pusha # Save +int_hw: cld # String ops inc + pusha # Save gp regs pushl %gs # Save - movl %esp,%eax # seg regs - pushl %fs # and - pushl %ds # point - pushl %es # to them + pushl %fs # seg + pushl %ds # regs + pushl %es push $SEL_SDATA # Set up popl %ds # to pushl %ds # address popl %es # data + leal 0x44(%esp,1),%esi # Base of frame + movl %esp,MEM_ESPR-0x04 # Save kernel stack pointer + movl -0x14(%esi),%eax # Get Int no + cmpl $-1,%eax # Hardware interrupt? + jne intusr.1 # Yes +/* + * v86 calls save the btx_v86 pointer on the real mode stack and read + * the address and flags from the btx_v86 structure. For interrupt + * handler invocations (VM86 INTx requests), disable interrupts, + * tracing, and alignment checking while the handler runs. + */ movl $MEM_USR,%ebx # User base movl %ebx,%edx # address - jc intusr.1 # If btx_v86 - xorl %edx,%edx # Control flags - xorl %ebp,%ebp # btx_v86 pointer -intusr.1: leal 0x50(%esp,1),%esi # Base of frame - pushl %esi # Save addl -0x4(%esi),%ebx # User ESP - movl MEM_TSS+TSS_ESP1,%edi # Link stack pointer - leal -0x4(%edi),%edi # Adjust for push - xorl %ecx,%ecx # Zero - movb $0x5,%cl # Push exception - rep # frame on - movsl # link stack - xchgl %eax,%esi # Saved seg regs - movl 0x40(%esp,1),%eax # Get int no - testl %edx,%edx # Have btx_v86? - jz intusr.2 # No movl (%ebx),%ebp # btx_v86 pointer - movb $0x4,%cl # Count - addl %ecx,%ebx # Adjust for pop - rep # Push saved seg regs - movsl # on link stack addl %ebp,%edx # Flatten btx_v86 ptr - leal 0x14(%edx),%esi # Seg regs pointer - movl 0x4(%edx),%eax # Get int no/address - movzwl 0x2(%edx),%edx # Get control flags -intusr.2: movl %ebp,(%edi) # Push btx_v86 and - movl %edi,MEM_TSS+TSS_ESP1 # save link stack ptr - popl %edi # Base of frame - xchgl %eax,%ebp # Save intno/address - movl 0x48(%esp,1),%eax # Get flags - testb $0x2,%dl # Simulate CALLF? - jnz intusr.3 # Yes - decl %ebx # Push flags - decl %ebx # on V86 - movw %ax,(%ebx) # stack -intusr.3: movb $0x4,%cl # Count - subl %ecx,%ebx # Push return address - movl $inthlt,(%ebx) # on V86 stack - rep # Copy seg regs to - movsl # exception frame - xchgl %eax,%ecx # Save flags - movl %ebx,%eax # User ESP - subl $V86_STK,%eax # Less bytes - ja intusr.4 # to - xorl %eax,%eax # keep -intusr.4: shrl $0x4,%eax # Gives segment - stosl # Set SS - shll $0x4,%eax # To bytes - xchgl %eax,%ebx # Swap - subl %ebx,%eax # Gives offset - stosl # Set ESP - xchgl %eax,%ecx # Get flags - btsl $0x11,%eax # Set VM - andb $~0x1,%ah # Clear TF - stosl # Set EFL - xchgl %eax,%ebp # Get int no/address - testb $0x1,%dl # Address? - jnz intusr.5 # Yes - shll $0x2,%eax # Scale + movl %edx,MEM_ESPR-0x08 # Save btx_v86 ptr + movl V86_ADDR(%edx),%eax # Get int no/address + movl V86_CTL(%edx),%edx # Get control flags + movl -0x08(%esi),%ebx # Save user flags in %ebx + testl $V86F_ADDR,%edx # Segment:offset? + jnz intusr.4 # Yes + andl $~(PSL_I|PSL_T|PSL_AC),%ebx # Disable interrupts, tracing, + # and alignment checking for + # interrupt handler + jmp intusr.3 # Skip hardware interrupt +/* + * Hardware interrupts store a NULL btx_v86 pointer and use the + * address (interrupt number) from the stack with empty flags. Also, + * push a dummy frame of zeros onto the stack for all the general + * purpose and segment registers and clear %eflags. This gives the + * hardware interrupt handler a clean slate. + */ +intusr.1: xorl %edx,%edx # Control flags + movl %edx,MEM_ESPR-0x08 # NULL btx_v86 ptr + movl $12,%ecx # Frame is 12 dwords +intusr.2: pushl $0x0 # Fill frame + loop intusr.2 # with zeros + movl $PSL_RESERVED_DEFAULT,%ebx # Set clean %eflags +/* + * Look up real mode IDT entry for hardware interrupts and VM86 INTx + * requests. + */ +intusr.3: shll $0x2,%eax # Scale movl (%eax),%eax # Load int vector -intusr.5: movl %eax,%ecx # Save - shrl $0x10,%eax # Gives segment - stosl # Set CS - movw %cx,%ax # Restore - stosl # Set EIP - leal 0x10(%esp,1),%esp # Discard seg regs - popa # Restore - iret # To V86 mode + jmp intusr.5 # Skip CALLF test +/* + * Panic if V86F_CALLF isn't set with V86F_ADDR. + */ +intusr.4: testl $V86F_CALLF,%edx # Far call? + jnz intusr.5 # Ok + movl %edx,0x30(%esp,1) # Place VM86 flags in int no + movl $badvm86,%esi # Display bad + call putstr # VM86 call + popl %es # Restore + popl %ds # seg + popl %fs # regs + popl %gs + popal # Restore gp regs + jmp ex_noc # Panic +/* + * %eax now holds the segment:offset of the function. + * %ebx now holds the %eflags to pass to real mode. + * %edx now holds the V86F_* flags. + */ +intusr.5: movw %bx,MEM_ESPR-0x12 # Pass user flags to real mode + # target +/* + * If this is a v86 call, copy the seg regs out of the btx_v86 structure. + */ + movl MEM_ESPR-0x08,%ecx # Get btx_v86 ptr + jecxz intusr.6 # Skip for hardware ints + leal -0x44(%esi),%edi # %edi => kernel stack seg regs + pushl %esi # Save + leal V86_ES(%ecx),%esi # %esi => btx_v86 seg regs + movl $4,%ecx # Copy seg regs + rep # from btx_v86 + movsl # to kernel stack + popl %esi # Restore +intusr.6: movl -0x08(%esi),%ebx # Copy user flags to real + movl %ebx,MEM_ESPR-0x0c # mode return trampoline + movl $rret_tramp,%ebx # Set return trampoline + movl %ebx,MEM_ESPR-0x10 # CS:IP + movl %eax,MEM_ESPR-0x16 # Real mode target CS:IP + ljmpw $SEL_RCODE,$intusr.7 # Change to 16-bit segment + .code16 +intusr.7: movl %cr0,%eax # Leave + dec %al # protected + movl %eax,%cr0 # mode + ljmpw $0x0,$intusr.8 +intusr.8: xorw %ax,%ax # Reset %ds + movw %ax,%ds # and + movw %ax,%ss # %ss + lidt ivtdesc # Set IVT + popl %es # Restore + popl %ds # seg + popl %fs # regs + popl %gs + popal # Restore gp regs + movw $MEM_ESPR-0x16,%sp # Switch to real mode stack + iret # Call target routine +/* + * For the return to real mode we setup a stack frame like this on the real + * mode stack. Note that callf calls won't pop off the flags, but we just + * ignore that by repositioning %sp to be just above the btx_v86 pointer + * so it is aligned. The stack is relative to MEM_ESPR. + * + * -0x04 kernel %esp + * -0x08 btx_v86 + * -0x0c %eax + * -0x10 %ecx + * -0x14 %edx + * -0x18 %ebx + * -0x1c %esp + * -0x20 %ebp + * -0x24 %esi + * -0x28 %edi + * -0x2c %gs + * -0x30 %fs + * -0x34 %ds + * -0x38 %es + * -0x3c %eflags + */ +rret_tramp: movw $MEM_ESPR-0x08,%sp # Reset stack pointer + pushal # Save gp regs + pushl %gs # Save + pushl %fs # seg + pushl %ds # regs + pushl %es + pushfl # Save %eflags + cli # Disable interrupts + std # String ops dec + xorw %ax,%ax # Reset seg + movw %ax,%ds # regs + movw %ax,%es # (%ss is already 0) + lidt idtdesc # Set IDT + lgdt gdtdesc # Set GDT + mov %cr0,%eax # Switch to protected + inc %ax # mode + mov %eax,%cr0 # + ljmp $SEL_SCODE,$rret_tramp.1 # To 32-bit code + .code32 +rret_tramp.1: xorl %ecx,%ecx # Zero + movb $SEL_SDATA,%cl # Setup + movw %cx,%ss # 32-bit + movw %cx,%ds # seg + movw %cx,%es # regs + movl MEM_ESPR-0x04,%esp # Switch to kernel stack + leal 0x44(%esp,1),%esi # Base of frame + andb $~0x2,tss_desc+0x5 # Clear TSS busy + movb $SEL_TSS,%cl # Set task + ltr %cx # register +/* + * Now we are back in protected mode. The kernel stack frame set up + * before entering real mode is still intact. For hardware interrupts, + * leave the frame unchanged. + */ + cmpl $0,MEM_ESPR-0x08 # Leave saved regs unchanged + jz rret_tramp.3 # for hardware ints +/* + * For V86 calls, copy the registers off of the real mode stack onto + * the kernel stack as we want their updated values. Also, initialize + * the segment registers on the kernel stack. + * + * Note that the %esp in the kernel stack after this is garbage, but popa + * ignores it, so we don't have to fix it up. + */ + leal -0x18(%esi),%edi # Kernel stack GP regs + pushl %esi # Save + movl $MEM_ESPR-0x0c,%esi # Real mode stack GP regs + movl $8,%ecx # Copy GP regs from + rep # real mode stack + movsl # to kernel stack + movl $SEL_UDATA,%eax # Selector for data seg regs + movl $4,%ecx # Initialize %ds, + rep # %es, %fs, and + stosl # %gs +/* + * For V86 calls, copy the saved seg regs on the real mode stack back + * over to the btx_v86 structure. Also, conditionally update the + * saved eflags on the kernel stack based on the flags from the user. + */ + movl MEM_ESPR-0x08,%ecx # Get btx_v86 ptr + leal V86_GS(%ecx),%edi # %edi => btx_v86 seg regs + leal MEM_ESPR-0x2c,%esi # %esi => real mode seg regs + xchgl %ecx,%edx # Save btx_v86 ptr + movl $4,%ecx # Copy seg regs + rep # from real mode stack + movsl # to btx_v86 + popl %esi # Restore + movl V86_CTL(%edx),%edx # Read V86 control flags + testl $V86F_FLAGS,%edx # User wants flags? + jz rret_tramp.3 # No + movl MEM_ESPR-0x3c,%eax # Read real mode flags + movw %ax,-0x08(%esi) # Update user flags (low 16) +/* + * Return to the user task + */ +rret_tramp.3: popl %es # Restore + popl %ds # seg + popl %fs # regs + popl %gs + popal # Restore gp regs + addl $4,%esp # Discard int no + iret # Return to user mode + /* * System Call. */ @@ -882,13 +729,6 @@ intx30: cmpl $SYS_EXEC,%eax # Exec sys movl $MEM_USR,%eax # User base address addl 0xc(%esp,1),%eax # Change to user leal 0x4(%eax),%esp # stack -#ifdef PAGING - movl %cr0,%eax # Turn - andl $~0x80000000,%eax # off - movl %eax,%cr0 # paging - xorl %eax,%eax # Flush - movl %eax,%cr3 # TLB -#endif popl %eax # Call call *%eax # program intx30.1: orb $0x1,%ss:btx_hdr+0x7 # Flag reboot @@ -920,7 +760,7 @@ dump.1: testb $DMP_X32,%ch # Dump long dump.2: testb $DMP_MEM,%ch # Dump memory? jz dump.8 # No pushl %ds # Save - testb $0x2,0x52(%ebx) # V86 mode? + testl $PSL_VM,0x50(%ebx) # V86 mode? jnz dump.3 # Yes verr 0x4(%esi) # Readable selector? jnz dump.3 # No @@ -1111,6 +951,61 @@ putchr.4: movw %dx,(%ebx) # Update pos ret # To caller #endif + .code16 +/* + * Real Mode Hardware interrupt jump table. + */ +intr20: push $0x8 # Int 0x20: IRQ0 + jmp int_hwr # V86 int 0x8 + push $0x9 # Int 0x21: IRQ1 + jmp int_hwr # V86 int 0x9 + push $0xa # Int 0x22: IRQ2 + jmp int_hwr # V86 int 0xa + push $0xb # Int 0x23: IRQ3 + jmp int_hwr # V86 int 0xb + push $0xc # Int 0x24: IRQ4 + jmp int_hwr # V86 int 0xc + push $0xd # Int 0x25: IRQ5 + jmp int_hwr # V86 int 0xd + push $0xe # Int 0x26: IRQ6 + jmp int_hwr # V86 int 0xe + push $0xf # Int 0x27: IRQ7 + jmp int_hwr # V86 int 0xf + push $0x10 # Int 0x28: IRQ8 + jmp int_hwr # V86 int 0x10 + push $0x11 # Int 0x29: IRQ9 + jmp int_hwr # V86 int 0x11 + push $0x12 # Int 0x2a: IRQ10 + jmp int_hwr # V86 int 0x12 + push $0x13 # Int 0x2b: IRQ11 + jmp int_hwr # V86 int 0x13 + push $0x14 # Int 0x2c: IRQ12 + jmp int_hwr # V86 int 0x14 + push $0x15 # Int 0x2d: IRQ13 + jmp int_hwr # V86 int 0x15 + push $0x16 # Int 0x2e: IRQ14 + jmp int_hwr # V86 int 0x16 + push $0x17 # Int 0x2f: IRQ15 + jmp int_hwr # V86 int 0x17 +/* + * Reflect hardware interrupts in real mode. + */ *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***