Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 06 Jun 1996 14:34:44 +0000
From:      Matt Thomas <matt@lkg.dec.com>
To:        hosokawa@mt.cs.keio.ac.jp (HOSOKAWA Tatsumi)
Cc:        mobile@freebsd.org
Subject:   Re: Wavelan PCMCIA 
Message-ID:  <199606061434.OAA16986@whydos.lkg.dec.com>
In-Reply-To: Your message of "Fri, 07 Jun 1996 02:38:05 %2B0900." <199606061738.CAA19844@frig.mt.cs.keio.ac.jp> 

next in thread | previous in thread | raw e-mail | index | archive | help

> Wow!
> 
> Pls tell me the detailed configuration of your card (NetID, MAC addr,
> etc.) and your environment (how many cars? are you using the
> station?).

Card inserted, slot 3
Card inserted, slot 2
Card inserted, slot 0
wlp0: nwid [2:24] mac:[8:0:e:20:83:d]
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1202B/2475>, removable, intr, iordis
wcd0: 689Kb/sec, 128Kb cache, audio play, 255 volume levels, tray
wcd0: 120mm data disc loaded

pccardc dumpcis

Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  00 00 ff
        Common memory device information:
                Device number 1, type No device, WPS = OFF
                Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 80
    000:  05 00 44 69 67 69 74 61 6c 00 52 6f 61 6d 41 62
    010:  6f 75 74 2f 44 53 00 56 65 72 73 69 6f 6e 20 32
    020:  2e 30 30 00 57 61 76 65 4c 41 4e 2f 50 43 4d 43
    030:  49 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    040:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
        Version = 5.0, Manuf = [Digital],card vers = [RoamAbout/DS]
        Addit. info = [Version 2.00],[WaveLAN/PCMCIA]
Tuple #3, code = 0x10 (Checksum), length = 5
    000:  07 00 63 00 3c
        Checksum from offset 7, length 99, value is 0x3c
Tuple #4, code = 0x17 (Attribute memory descriptor), length = 3
    000:  49 02 ff
        Attribute memory device information:
                Device number 1, type EEPROM, WPS = ON
                Speed = 250nS, Memory block size = 8Kb, 1 units
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
    000:  56 01 01 01
        PCMCIA ID = 0x156, OEM ID = 0x101
Tuple #6, code = 0x21 (Functional ID), length = 2
    000:  06 00
        Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
    000:  01 07
        Modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 5
    000:  02 80 84 1e 00
        Data modem services available:
Tuple #9, code = 0x22 (Functional EXT), length = 2
    000:  03 06
Tuple #10, code = 0x22 (Functional EXT), length = 2
    000:  03 07
Tuple #11, code = 0x22 (Functional EXT), length = 8
    000:  04 06 08 00 0e 20 83 0d
        Voice services available:
Tuple #12, code = 0x22 (Functional EXT), length = 2
    000:  05 01
        Modem interface capabilities:
Tuple #13, code = 0x1a (Configuration map), length = 7
    000:  03 03 00 40 00 00 01
        Reg len = 4, config register addr = 0x4000, last config = 0x3
        Registers: X------- 
Tuple #14, code = 0x1b (Configuration entry), length = 15
    000:  c1 01 99 77 55 4d 5d 3e 66 4d 23 30 ff ff 00
        Config index = 0x1(default)
        Interface byte = 0x1 (I/O)
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 1 second: 3.5 x 100mA
                Max current average over 10 ms: 6 x 100mA
                Power down supply current: 4.5 x 10mA
        Card decodes 3 address lines, 8 Bit I/O only
                IRQ modes: Level
                IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
        Max twin cards = 0
        Misc attr:
Tuple #15, code = 0x1b (Configuration entry), length = 17
    000:  83 01 99 77 55 4d 5d b6 45 b6 7d 45 23 30 ff ff
    010:  00
        Config index = 0x3
        Interface byte = 0x1 (I/O)
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 1 second: 3 x 100mA, ext = 0x45
                Max current average over 10 ms: 3 x 100mA, ext = 0x7d
                Power down supply current: 4 x 10mA
        Card decodes 3 address lines, 8 Bit I/O only
                IRQ modes: Level
                IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
        Max twin cards = 0
        Misc attr:
Tuple #16, code = 0x11 (Long link to attribute memory), length = 4
    000:  f2 0d 00 00
        Long link to attribute memory, address 0xdf2
Tuple #17, code = 0xff (Terminator), length = 0
Tuple #18, code = 0x13 (Link target), length = 3
    000:  43 49 53
Tuple #19, code = 0x0 (Null tuple), length = 64
    000:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    010:  08 00 0e 20 83 0d 00 00 00 00 00 00 00 04 03 00
    020:  00 03 00 02 24 01 00 00 00 00 00 00 00 00 00 00
    030:  00 00 00 00 00 00 00 00 00 00 00 00 01 b3 28 aa
Tuple #20, code = 0x14 (No link), length = 0
Tuple #21, code = 0xff (Terminator), length = 0

> I've not succeeded to use this card under our package yet.

Since the romaing protocol is not yet supported, I've set the
nwid 0x0224 to the same nwid as the "best" access point that
I can see.

-- 
Matt Thomas               Internet:   matt@3am-software.com
3am Software Foundry      WWW URL:    http://www.3am-software.com/bio/matt.html
Westford, MA              Disclaimer: I disavow all knowledge of this message





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606061434.OAA16986>