Date: Thu, 26 Nov 2020 13:52:37 +0100 From: Michael Schuster <michaelsprivate@gmail.com> To: abefar@protonmail.com Cc: "freebsd-fs@freebsd.org" <freebsd-fs@freebsd.org> Subject: Re: ZFS not mounting after upgrade to 12.2 Message-ID: <CADqw_gLBjL%2B2whx=XTyCckEWJA48od1weWoZvsPRYhe_aUUyog@mail.gmail.com> In-Reply-To: <LxCiWaYTMwF3MPzD80odvrdYcZdwPLyDIr-9mSLjvUfKyytWDPOsRxK_7JInZ7c_y9ImiQehl9T0-zquchmUAKoR2kXIAWdUDAG3V-4SUf0=@protonmail.com> References: <LxCiWaYTMwF3MPzD80odvrdYcZdwPLyDIr-9mSLjvUfKyytWDPOsRxK_7JInZ7c_y9ImiQehl9T0-zquchmUAKoR2kXIAWdUDAG3V-4SUf0=@protonmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
See "my" recent thread: Recipe for compiling and installing CURRENT on 12.x RELEASE in a seperate boot env perhaps there's something there for you. HTH On Thu, Nov 26, 2020 at 1:47 PM abefar--- via freebsd-fs < freebsd-fs@freebsd.org> wrote: > Greetings! > > After upgrading to 12.2-RELEASE, the ZFS filesystems on my fileserver no > longer mount on boot. I have to do either "zfs mount -a" or "zpool export > data && zpool import data" in order for the pool's filesystems to activate > after booting. > > The first time I run the zfs(8) or zpool(8) commands after boot, there's a > delay of several seconds, even though the kernel modules are already loaded > at this point. > Everything appears normal according to "zfs list" and "zpool status", and > nothing out of the ordinary seems to occur in dmesg or the syslog. The only > thing indicating a problem is mountd(8) complaining about non-existing > export mount points. > I have zfs_enable="YES" in rc.conf, and have also tried adding > zfs_load="YES" to loader.conf, to no avail. > > My pool consists of an mps(4) SAS controller (LSI 9211-8i) with 8 HDDs in > raidz2 mode, originally added using their raw diskid/* device files (before > creating a partition table on them). > The only non-standard factor I can think of is that the server is a > virtual machine running on KVM (Debian Buster host w/ Linux 4.19) with the > HBA attached using PCI passthrough. However, this setup has been working > perfectly fine since 11.0-RELEASE where I moved it over from dedicated > hardware. > > Any ideas on how to proceed with troubleshooting this issue? > > Thanks! > _______________________________________________ > freebsd-fs@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-fs > To unsubscribe, send any mail to "freebsd-fs-unsubscribe@freebsd.org" > -- Michael Schuster http://recursiveramblings.wordpress.com/ recursion, n: see 'recursion'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADqw_gLBjL%2B2whx=XTyCckEWJA48od1weWoZvsPRYhe_aUUyog>