Date: Mon, 12 Aug 2002 12:35:17 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: "Schroeder, Aaron" <Aaron.Schroeder@qg.com> Cc: "'Wilko Bulte'" <wkb@freebie.xs4all.nl>, Marcin Gryszkalis <mgryszkalis@cerint.pl>, freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG Subject: RE: ISP Nvram [ was 'da driver problem?' ] Message-ID: <Pine.BSF.4.21.0208121234550.73304-100000@beppo> In-Reply-To: <025596A38A894B45AFE62346A6BF47464E29AF@waexch1.qgraph.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm sure he is. Unless properly segmented this usually doesn't work well. On Mon, 12 Aug 2002, Schroeder, Aaron wrote: > Wilko, > > Are you thinking the same thing that I am? Wide and Narrow on the same bus = > train wreck? > > AJ > > -----Original Message----- > From: Wilko Bulte [mailto:wkb@freebie.xs4all.nl] > Sent: Monday, August 12, 2002 2:27 PM > To: Marcin Gryszkalis > Cc: mjacob@feral.com; freebsd-alpha; freebsd-scsi@FreeBSD.ORG > Subject: Re: ISP Nvram [ was 'da driver problem?' ] > > > On Mon, Aug 12, 2002 at 09:06:03PM +0200, Marcin Gryszkalis wrote: > > Matthew Jacob wrote: > > > Interrupt the boot process and at the loader prompt do > > > set isp_debug=0x1f > > > and boot (or fail to boot) and send us the output. > > > Or add > > > set isp_no_nvram=0x1 > > > to keep NVRAM from being read. > > > > I'll try... (I'll be able to do it on wednesday). > > > > > You haven't said whether you're now loading isp firmware or not. > > I loaded ispfw.ko (w/o any difference). > > > > Preloaded elf kernel "kernel" at 0xfffffc0000600000. > > Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0. > > ... > > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem > > 0x82018000-0x82018fff irq 12 at device 9.0 on pci0 > > isp0: interrupting at CIA irq 12 > > isp0: invalid NVRAM header > > da0 at isp0 bus 0 target 1 lun 0 > > da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device > > da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing > Enabled > > Martin, are these drives inside StorageWorks SBB containers? [I lost the > beginning of this thread]. If yes, do you have a mix of RZ29B-VA and > RZ29B-VW drives? > > -- > | / o / /_ _ wilko@FreeBSD.org > |/|/ / / /( (_) Bulte Arnhem, the Netherlands > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0208121234550.73304-100000>