Date: Mon, 03 Jul 2000 10:26:22 -0700 From: josh b <statik@cris.com> To: Larry Rosenman <ler@lerctr.org> Cc: Larry Rosenman <ler@lerctr.org>, freebsd-questions@FreeBSD.ORG Subject: Re: 3com 3c509 is the wacknes!! Message-ID: <4.3.1.1.20000703101704.00aea2f0@pop3.concentric.net> In-Reply-To: <200007031115.e63BFZ116407@lerami.lerctr.org> References: <4.3.1.1.20000702233853.00adf460@pop3.concentric.net>
next in thread | previous in thread | raw e-mail | index | archive | help
thank god i got it working.. i took the 3Com dos util for my card and placed the exe on a dos bootdisk and ran it. i saw pnp was already disconfigured ;(.but! i saw the ports and irq of it, i knew 15 was in use or something so i just used the auto configure thing in the program and it works perfect now!!!!!!!!!! its on port 300 irq5, its a beauty,,cept i see it has some other connecions on the back of my card, a paralell port like one and a werid ass one that looks like u could plug ur cable wire for ur tv in there, its a mini tube kinda sticking out with a place for a wire in the middle..odd, so if anyone knows what i can use these other conections for thatd be nice..other than that thanks for the help!!!!!!!! At 06:15 AM 7/3/00 -0500, Larry Rosenman wrote: >Grr. Can you clear it (using the pins?) > >I suspect that IRQ15 is NOT available, and the card wants it. > >LER > > > bios is passworded =( > > At 01:47 AM 7/3/00 -0500, Larry Rosenman wrote: > > > > thats whats pissing me off! i dont know anything about it other > than its a > > > > 3Com 3c509b isa..i got this old computer from a school donation and > now im > > > > mesing with it and installed freebsdm, runs great..right now im > setting up > > > > a dos bootdisk w/ this 3com dos util and im gona disable pnp on the > card, > > > > hopefully it goes well > > >I mean in the BIOS of this computer....???? > > > > > >LER > > > > > > > but At 01:23 AM 7/3/00 -0500, Larry Rosenman wrote: > > > > >Is it set to PCI/PNP or LEGACY ISA? > > > > > > > > > >(15 is usually the 2nd IDE controller, so You may need to > > > > >free it and tell the BIOS to use it for LEGACY ISA). > > > > > > > > > >Larry > > > > > > i think its free... in my bios setup it has 14,11, and 10 being > used.. > > > > > > At 01:02 AM 7/3/00 -0500, Larry Rosenman wrote: > > > > > > > > thanks for the quick reply.. i tried just device ep ( thats > what it > > > > > > > says to > > > > > > > > do in to LINT also) and it just gives me this on boot up: > > > > > > > > > > > > > > > > ep0: <3Com 35c09-Comba Etherlink III> at port 0x280-0x28f irq > > > 15 on > > > > > isa0 > > > > > > > > ep0: No irq?! > > > > > > > > ep0: ep_alloc() failed! (6) > > > > > > >Is IRQ 15 free in the BIOS? > > > > > > > > > > > > > >Larry > > > > > > > > > > > > > > > > i canot figure it out... > > > > > > > > > > > > > > > > At 08:30 PM 7/2/00 -0400, you wrote: > > > > > > > > >You dont have to give it any arguements for the nic, just try > > > > > device ep0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >At 08:26 PM 7/2/00 , you wrote: > > > > > > > > >>hello...im trying to get my 3com etherlink 3 to work on my > > > 4.0 box. > > > > > > > > >>heres my kernel config for it: > > > > > > > > >> > > > > > > > > >>device ep0 at isa? port 0x300 irq 10 > > > > > > > > >> > > > > > > > > >>i have the rest of the nic commented out. and when i boot > up i > > > > > get this: > > > > > > > > >> > > > > > > > > >>ep0 at port 0x300 irq 10 on isa0 > > > > > > > > >>ep0: eeprom failed to come ready. > > > > > > > > >> > > > > > > > > >>ep0: Eterhnet adress 00:00:00:00:00:00 > > > > > > > > >>ep1: <3Com 35c09-Comba Etherlink III> at port 0x280-0x28f > irq 15 > > > > > on isa0 > > > > > > > > >>ep1: No irq?! > > > > > > > > >>ep1: ep_alloc() failed! (6) > > > > > > > > >>device_probe_and_attach: ep1 attach returned 6 > > > > > > > > >> > > > > > > > > >> > > > > > > > > >>i have no idea why ep1 even exists!! i read in the > freebsd book > > > > > that the > > > > > > > > >>ep driver was buggy, anyone have any idea on this?? > > > > > > > > >>thanks!!!!! > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >>To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > >>with "unsubscribe freebsd-questions" in the body of the > message > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________ > > > > > > > > >Steiny's Studio > > > > > > > > >Pachyderm Productions > > > > > > > > >http://steiny.hypermart.net > > > > > > > > > > > > > > > > > > > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > >with "unsubscribe freebsd-questions" in the body of the > message > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > > > > > >-- > > > > > > >Larry Rosenman http://www.lerctr.org/~ler > > > > > > >Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org > > > > > > >US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > > > > > > > > > > > > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > >-- > > > > >Larry Rosenman http://www.lerctr.org/~ler > > > > >Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org > > > > >US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > > > > > > > > > > > >-- > > >Larry Rosenman http://www.lerctr.org/~ler > > >Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org > > >US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > > >with "unsubscribe freebsd-questions" in the body of the message > > > > >-- >Larry Rosenman http://www.lerctr.org/~ler >Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org >US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.1.1.20000703101704.00aea2f0>