Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Aug 2005 11:27:14 GMT
From:      Rogier "DocWilco" Mulhuijzen <freebsd@bsdchicks.com>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   amd64/85431: AMD64 has short but temporary freezes (hangups) on Sun Blade W1100Z
Message-ID:  <200508291127.j7TBREIl098585@www.freebsd.org>
Resent-Message-ID: <200508291130.j7TBU9A1029440@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         85431
>Category:       amd64
>Synopsis:       AMD64 has short but temporary freezes (hangups) on Sun Blade W1100Z
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Aug 29 11:30:09 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Rogier "DocWilco" Mulhuijzen
>Release:        6.0-BETA2
>Organization:
>Environment:
FreeBSD andromeda.kaashema.nl 6.0-BETA2 FreeBSD 6.0-BETA2 #6: Mon Aug 22 20:23:34 CEST 2005     root@andromeda.kaashema.nl:/usr/obj/usr/src/sys/ANDROMEDA  amd64

>Description:
I have a Sun Blade W1100Z system and 6.0-BETA2 works fine on it (5.4 seems to have trouble with the USB controllers), but every 9-10 seconds there's a 0.5-1 second freeze. The whole system stops responding. Any moving display freezes, and mouse and keyboard input are ignored. Network traffic does not seem to get lost, but will experience a delay.

I can't boot without ACPI, because then the ATA controllers aren't enabled (they're behind a ACPI PCI bridge it seems).

Both 5.4 and 6.0-BETA2 seem to suffer the stutter problems, and there seems to be no difference between GENERIC and my custom kernels.

Here's the boot dmesg and an example of a ping to the host.

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #6: Mon Aug 22 20:23:34 CEST 2005
    root@andromeda.kaashema.nl:/usr/obj/usr/src/sys/ANDROMEDA
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 144 (1794.90-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf5a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 536215552 (511 MB)
avail memory = 508952576 (485 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
acpi0: <PTLTD    XSDT> on motherboard
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <NEC uPD 9210 USB controller> mem 0xe8106000-0xe8106fff irq 18 at device 3.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe8107000-0xe8107fff irq 19 at device 3.1 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe8108800-0xe81088ff irq 16 at device 3.2 on pci1
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe8108000-0xe81087ff,0xe8100000-0xe8103fff irq 19 at device 4.0 on pci1
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 12:34:56:78:12:34:56:78
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 12:34:56:34:56:78
fwe0: Ethernet address: 12:34:56:34:56:78
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xe8200000-0xe820ffff irq 28 at device 2.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:0a:e4:2e:45:4b
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib4
agp0: <AMD 8151 AGP graphics tunnel> mem 0xf0000000-0xf7ffffff at device 0.0 on pci8
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci8
pci9: <ACPI PCI bus> on pcib5
pci9: <display, VGA> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci8
pci14: <ACPI PCI bus> on pcib6
pci8: <base peripheral, interrupt controller> at device 3.1 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci8
pci19: <ACPI PCI bus> on pcib7
pci19: <mass storage, SCSI> at device 4.0 (no driver attached)
pci19: <mass storage, SCSI> at device 4.1 (no driver attached)
pci8: <base peripheral, interrupt controller> at device 4.1 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
ppc0: cannot reserve I/O port range
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
ppc0: cannot reserve I/O port range
orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x0430 product 0x0100, rev 2.00/1.07, addr 2, iclass 3/1
ums0: 3 buttons.
ukbd0: vendor 0x0430 product 0x0005, rev 1.10/2.00, addr 2, iclass 3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 1794896545 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <WDC WD800BB-22JHA0 05.01C05> at ata0-master UDMA100
acd0: CDRW <AOPEN COM5232/AAH/1.06> at ata1-master UDMA33
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s1a
----SNIP----

PING 192.168.1.33 (192.168.1.33): 56 data bytes
64 bytes from 192.168.1.33: icmp_seq=0 ttl=64 time=0.410 ms
64 bytes from 192.168.1.33: icmp_seq=1 ttl=64 time=0.401 ms
64 bytes from 192.168.1.33: icmp_seq=2 ttl=64 time=0.364 ms
64 bytes from 192.168.1.33: icmp_seq=3 ttl=64 time=0.340 ms
64 bytes from 192.168.1.33: icmp_seq=4 ttl=64 time=0.463 ms
64 bytes from 192.168.1.33: icmp_seq=5 ttl=64 time=0.437 ms
64 bytes from 192.168.1.33: icmp_seq=6 ttl=64 time=0.380 ms
64 bytes from 192.168.1.33: icmp_seq=7 ttl=64 time=0.353 ms
64 bytes from 192.168.1.33: icmp_seq=8 ttl=64 time=0.476 ms
64 bytes from 192.168.1.33: icmp_seq=9 ttl=64 time=0.447 ms
64 bytes from 192.168.1.33: icmp_seq=10 ttl=64 time=118.937 ms
64 bytes from 192.168.1.33: icmp_seq=11 ttl=64 time=0.362 ms
64 bytes from 192.168.1.33: icmp_seq=12 ttl=64 time=0.360 ms
64 bytes from 192.168.1.33: icmp_seq=13 ttl=64 time=0.429 ms
64 bytes from 192.168.1.33: icmp_seq=14 ttl=64 time=0.393 ms
64 bytes from 192.168.1.33: icmp_seq=15 ttl=64 time=0.370 ms
64 bytes from 192.168.1.33: icmp_seq=16 ttl=64 time=0.469 ms
64 bytes from 192.168.1.33: icmp_seq=17 ttl=64 time=0.465 ms
64 bytes from 192.168.1.33: icmp_seq=18 ttl=64 time=0.458 ms
64 bytes from 192.168.1.33: icmp_seq=19 ttl=64 time=0.436 ms
64 bytes from 192.168.1.33: icmp_seq=20 ttl=64 time=0.386 ms
64 bytes from 192.168.1.33: icmp_seq=21 ttl=64 time=0.384 ms
64 bytes from 192.168.1.33: icmp_seq=22 ttl=64 time=0.362 ms
64 bytes from 192.168.1.33: icmp_seq=23 ttl=64 time=0.477 ms
64 bytes from 192.168.1.33: icmp_seq=24 ttl=64 time=0.461 ms
64 bytes from 192.168.1.33: icmp_seq=25 ttl=64 time=0.451 ms
64 bytes from 192.168.1.33: icmp_seq=26 ttl=64 time=0.404 ms
64 bytes from 192.168.1.33: icmp_seq=27 ttl=64 time=0.377 ms
64 bytes from 192.168.1.33: icmp_seq=28 ttl=64 time=0.349 ms
64 bytes from 192.168.1.33: icmp_seq=29 ttl=64 time=0.465 ms
64 bytes from 192.168.1.33: icmp_seq=30 ttl=64 time=0.461 ms
64 bytes from 192.168.1.33: icmp_seq=31 ttl=64 time=53.552 ms
64 bytes from 192.168.1.33: icmp_seq=32 ttl=64 time=0.424 ms
64 bytes from 192.168.1.33: icmp_seq=33 ttl=64 time=0.392 ms
64 bytes from 192.168.1.33: icmp_seq=34 ttl=64 time=0.382 ms
64 bytes from 192.168.1.33: icmp_seq=35 ttl=64 time=0.357 ms
64 bytes from 192.168.1.33: icmp_seq=36 ttl=64 time=0.455 ms
64 bytes from 192.168.1.33: icmp_seq=37 ttl=64 time=0.430 ms
64 bytes from 192.168.1.33: icmp_seq=38 ttl=64 time=0.399 ms
64 bytes from 192.168.1.33: icmp_seq=39 ttl=64 time=0.358 ms
64 bytes from 192.168.1.33: icmp_seq=40 ttl=64 time=0.467 ms
64 bytes from 192.168.1.33: icmp_seq=41 ttl=64 time=530.646 ms
64 bytes from 192.168.1.33: icmp_seq=42 ttl=64 time=0.401 ms
64 bytes from 192.168.1.33: icmp_seq=43 ttl=64 time=0.349 ms
64 bytes from 192.168.1.33: icmp_seq=44 ttl=64 time=0.474 ms
64 bytes from 192.168.1.33: icmp_seq=45 ttl=64 time=0.430 ms
64 bytes from 192.168.1.33: icmp_seq=46 ttl=64 time=0.382 ms
64 bytes from 192.168.1.33: icmp_seq=47 ttl=64 time=0.362 ms
64 bytes from 192.168.1.33: icmp_seq=48 ttl=64 time=0.477 ms
64 bytes from 192.168.1.33: icmp_seq=49 ttl=64 time=0.434 ms
64 bytes from 192.168.1.33: icmp_seq=50 ttl=64 time=0.397 ms
64 bytes from 192.168.1.33: icmp_seq=51 ttl=64 time=0.361 ms
64 bytes from 192.168.1.33: icmp_seq=52 ttl=64 time=0.468 ms
64 bytes from 192.168.1.33: icmp_seq=53 ttl=64 time=0.424 ms
64 bytes from 192.168.1.33: icmp_seq=54 ttl=64 time=0.400 ms
64 bytes from 192.168.1.33: icmp_seq=55 ttl=64 time=0.358 ms
64 bytes from 192.168.1.33: icmp_seq=56 ttl=64 time=0.455 ms
64 bytes from 192.168.1.33: icmp_seq=57 ttl=64 time=0.434 ms
64 bytes from 192.168.1.33: icmp_seq=58 ttl=64 time=0.405 ms
64 bytes from 192.168.1.33: icmp_seq=59 ttl=64 time=0.387 ms
64 bytes from 192.168.1.33: icmp_seq=60 ttl=64 time=0.354 ms
64 bytes from 192.168.1.33: icmp_seq=61 ttl=64 time=0.461 ms
64 bytes from 192.168.1.33: icmp_seq=62 ttl=64 time=475.124 ms
64 bytes from 192.168.1.33: icmp_seq=63 ttl=64 time=0.384 ms
64 bytes from 192.168.1.33: icmp_seq=64 ttl=64 time=0.367 ms
64 bytes from 192.168.1.33: icmp_seq=65 ttl=64 time=0.318 ms
64 bytes from 192.168.1.33: icmp_seq=66 ttl=64 time=0.437 ms
64 bytes from 192.168.1.33: icmp_seq=67 ttl=64 time=0.450 ms
64 bytes from 192.168.1.33: icmp_seq=68 ttl=64 time=0.421 ms
64 bytes from 192.168.1.33: icmp_seq=69 ttl=64 time=0.385 ms
64 bytes from 192.168.1.33: icmp_seq=70 ttl=64 time=0.351 ms
64 bytes from 192.168.1.33: icmp_seq=71 ttl=64 time=0.390 ms
64 bytes from 192.168.1.33: icmp_seq=72 ttl=64 time=0.354 ms
64 bytes from 192.168.1.33: icmp_seq=73 ttl=64 time=0.482 ms
64 bytes from 192.168.1.33: icmp_seq=74 ttl=64 time=0.433 ms
64 bytes from 192.168.1.33: icmp_seq=75 ttl=64 time=0.391 ms
64 bytes from 192.168.1.33: icmp_seq=76 ttl=64 time=0.486 ms
64 bytes from 192.168.1.33: icmp_seq=77 ttl=64 time=0.460 ms
64 bytes from 192.168.1.33: icmp_seq=78 ttl=64 time=0.431 ms
64 bytes from 192.168.1.33: icmp_seq=79 ttl=64 time=0.388 ms
64 bytes from 192.168.1.33: icmp_seq=80 ttl=64 time=0.356 ms
64 bytes from 192.168.1.33: icmp_seq=81 ttl=64 time=0.463 ms
64 bytes from 192.168.1.33: icmp_seq=82 ttl=64 time=0.430 ms
64 bytes from 192.168.1.33: icmp_seq=83 ttl=64 time=419.562 ms
64 bytes from 192.168.1.33: icmp_seq=84 ttl=64 time=0.505 ms
64 bytes from 192.168.1.33: icmp_seq=85 ttl=64 time=0.464 ms
64 bytes from 192.168.1.33: icmp_seq=86 ttl=64 time=0.350 ms
64 bytes from 192.168.1.33: icmp_seq=87 ttl=64 time=0.389 ms
64 bytes from 192.168.1.33: icmp_seq=88 ttl=64 time=0.500 ms
^C
--- 192.168.1.33 ping statistics ---
89 packets transmitted, 89 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.318/18.342/530.646/86.793 ms


>How-To-Repeat:
      
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200508291127.j7TBREIl098585>