Date: Thu, 13 Jun 2002 18:13:42 +0200 (CEST) From: Henri Hennebert <hlh@ciger.be> To: FreeBSD-gnats-submit@freebsd.org Subject: i386/39234: SMP 4.6-RC freezes during boot (Fujitsu-Siemens C200) Message-ID: <200206131613.g5DGDg7w000842@morzine1.ciger.be>
next in thread | raw e-mail | index | archive | help
>Number: 39234
>Category: i386
>Synopsis: SMP 4.6-RC freezes during boot (Fujitsu-Siemens C200)
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jun 13 09:20:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Henri Hennebert <hlh@ciger.be>
>Release: FreeBSD 4.6-RC i386
>Organization:
CIGER sa
>Environment:
System: FreeBSD morzine1.ciger.be 4.6-RC FreeBSD 4.6-RC #0: Fri Jun 7 17:10:32 CEST 2002 root@morzine1.ciger.be:/usr/obj/usr/src/sys/MORZINE i386
(this kernel is the same that the freezing one without options SMP
and APIC_IO of course)
Machine is a Fujitsu-Siemens C200 with motherboard D1306:
Chip set ServerWorks 3.0 HE SL
2 Pentium III 1.26 GHz
Clock speed 133 MHz
First-Level Cache 32KB
Second-Level Cache 512 KB
Memory 1GB
ATA 100 CD-ROM
Symbios Ultra 160
Graphics ATI RAGE Pro 2 XL
LAN Intel Pro 10/100B/100+
Serial + Parallel + USB
>Description:
During a boot -v, the last screen is:
SMP: AP CPU#1 Launched!
SMP CPU1 apic_initialize()
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
adc0: <FX4830T/R02N> CDROM drive ...
adc0: other stuff about adc0
...
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
***FREEZE*** :-[
dmesg of the kernel ***WITHOUT SMP and APIC_IO options***
just to give a hint at the HW config:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #0: Fri Jun 7 17:10:32 CEST 2002
root@morzine1.ciger.be:/usr/obj/usr/src/sys/MORZINE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1260607981 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1260.61-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073741824 (1048576K bytes)
avail memory = 1041932288 (1017512K bytes)
Preloaded elf kernel "kernel" at 0xc0393000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 15 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
sym0: <1010-66> port 0x1c00-0x1cff mem 0xfe000000-0xfe001fff,0xfe004000-0xfe0043ff irq 5 at device 8.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-66> port 0x2000-0x20ff mem 0xfe002000-0xfe003fff,0xfe004400-0xfe0047ff irq 9 at device 10.0 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xfc000000-0xfc01ffff,0xfc021000-0xfc021fff irq 10 at device 10.0 on pci0
fxp0: Ethernet address 00:30:05:19:9f:a8
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1800-0x180f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfc022000-0xfc022fff irq 11 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
BRIDGE 020214 loaded
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
ata1-slave: ATAPI identify retries exceeded
acd0: CDROM <FX4830T> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
(probe22:sym1:0:8:0): phase change 6-7 6@0c96a58c resid=4.
sa0 at sym0 bus 0 target 4 lun 0
sa0: <HP C5683A C111> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
pass4 at sym1 bus 0 target 8 lun 0
pass4: <SDR GEM318 0> Fixed Processor SCSI-2 device
pass4: 3.300MB/s transfers
da0 at sym1 bus 0 target 0 lun 0
da0: <SEAGATE ST318452LC 8501> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at sym1 bus 0 target 1 lun 0
da1: <SEAGATE ST318452LC 8501> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at sym1 bus 0 target 2 lun 0
da2: <SEAGATE ST318452LC 8501> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
The output of mptable:
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f6920
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x77
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009a080
signature: 'PCMP'
base table length: 276
version: 1.4
checksum: 0xb3
OEM ID: 'FSCD1306'
Product ID: 'PRIMERGY '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 236
extended table checksum: 131
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
3 0x11 BSP, usable 6 11 1 0x383fbff
0 0x11 AP, usable 6 11 1 0x383fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 ISA
--
I/O APICs: APIC ID Version State Address
1 0x11 usable 0xfec00000
2 0x11 usable 0xfec01000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-hi edge 3 0 1 0
INT active-hi edge 3 1 1 1
INT active-hi edge 3 2 1 2
INT active-hi edge 3 3 1 3
INT active-hi edge 3 4 1 4
INT active-hi edge 3 6 1 6
INT active-hi edge 3 7 1 7
INT active-hi edge 3 8 1 8
INT active-hi edge 3 12 1 12
INT active-hi edge 3 13 1 13
INT active-hi edge 3 14 1 14
INT active-hi edge 3 15 1 15
INT active-lo level 0 10:A 2 14
INT active-lo level 0 15:A 2 12
INT active-lo level 1 8:A 2 4
INT active-lo level 1 10:A 2 13
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 255 0
NMI active-hi edge 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x1c00
--
System Address Space
bus ID: 1 address type: I/O address
address base: 0x1c00
address range: 0x500
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x2100
address range: 0xdf00
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfc000000
address range: 0x2000000
--
System Address Space
bus ID: 1 address type: memory address
address base: 0xfe000000
address range: 0x3c0000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfe3c0000
address range: 0xa40000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd0000
address range: 0x10000
--
Bus Heirarchy
bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000001
--
Compatibility Bus Address
bus ID: 2 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 2 address modifier: subtract
predefined range: 0x00000001
===============================================================================
I try the same SMP kernel on another configuration (Fujitsu-Siemens
motherboard D1031 with 2 PIII 800MHz and symbios SCSI) without
problem (buildworld run great).
I install RedHat 7.3 on the C200 and all run well. In case it may
help, here is the dmesg of the RH 7.3:
Linux version 2.4.18-3smp (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 SMP Thu Apr 18 07:27:31 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data)
BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
128MB HIGHMEM available.
found SMP MP-table at 000f6920
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 0009a000 reserved twice.
hm, page 0009b000 reserved twice.
On node 0 totalpages: 262144
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32768 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: FSCD1306 Product ID: PRIMERGY APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #1 Version 17 at 0xFEC00000.
I/O APIC #2 Version 17 at 0xFEC01000.
Processors: 2
Kernel command line: ro root=/dev/sda2
Initializing CPU#0
Detected 1260.705 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2516.58 BogoMIPS
Memory: 1030452k/1048576k available (1232k kernel code, 17648k reserved, 842k data, 304k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01
per-CPU timeslice cutoff: 1463.48 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2516.58 BogoMIPS
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01
Total of 2 processors activated (5033.16 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-5, 1-9, 1-10, 1-11, 2-0, 2-1, 2-2, 2-3, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-15 not connected.
..TIMER: vector=0x31 pin1=0 pin2=-1
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 16.
number of IO-APIC #2 registers: 16.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 69
0d 003 03 0 0 0 0 0 1 1 71
0e 003 03 0 0 0 0 0 1 1 79
0f 003 03 0 0 0 0 0 1 1 81
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0C000000
....... : arbitration: 0C
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 89
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 1 1 0 1 0 1 1 91
0d 003 03 1 1 0 1 0 1 1 99
0e 003 03 1 1 0 1 0 1 1 A1
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ20 -> 1:4
IRQ28 -> 1:12
IRQ29 -> 1:13
IRQ30 -> 1:14
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1260.4169 MHz.
..... host bus clock speed is 132.6753 MHz.
cpu: 0, clocks: 1326753, slice: 442251
CPU0<T0:1326752,T1:884496,D:5,S:442251,C:1326753>
cpu: 1, clocks: 1326753, slice: 442251
CPU1<T0:1326752,T1:442240,D:10,S:442251,C:1326753>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI->APIC IRQ transform: (B0,I10,P0) -> 30
PCI->APIC IRQ transform: (B0,I15,P0) -> 28
PCI->APIC IRQ transform: (B1,I8,P0) -> 20
PCI->APIC IRQ transform: (B1,I10,P0) -> 29
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 1024 slots per queue, batch=256
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller on PCI bus 00 dev 79
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hdc: FX4830T, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 219k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
sym53c8xx: at PCI bus 1, device 8, function 0
sym53c8xx: 53c1010-66 detected with Symbios NVRAM
sym53c8xx: at PCI bus 1, device 10, function 0
sym53c8xx: 53c1010-66 detected with Symbios NVRAM
sym53c1010-66-0: rev 0x1 on pci bus 1 device 10 function 0 irq 29
sym53c1010-66-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
sym53c1010-66-0: on-chip RAM at 0xfe002000
sym53c1010-66-0: restart (scsi reset).
sym53c1010-66-0: handling phase mismatch from SCRIPTS.
sym53c1010-66-0: Downloading SCSI SCRIPTS.
sym53c1010-66-1: rev 0x1 on pci bus 1 device 8 function 0 irq 20
sym53c1010-66-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
sym53c1010-66-1: on-chip RAM at 0xfe000000
sym53c1010-66-1: restart (scsi reset).
sym53c1010-66-1: handling phase mismatch from SCRIPTS.
sym53c1010-66-1: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
blk: queue f7dcfe18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST39204LC Rev: 3251
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c1eab018, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST318404LC Rev: 3251
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7dcfc18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SDR Model: GEM318 Rev: 0
Type: Processor ANSI SCSI revision: 02
blk: queue f7dcf018, I/O limit 4095Mb (mask 0xffffffff)
sym53c1010-66-0-<0,0>: tagged command queue depth set to 8
sym53c1010-66-0-<1,0>: tagged command queue depth set to 8
Vendor: HP Model: C5683A Rev: C111
Type: Sequential-Access ANSI SCSI revision: 02
blk: queue f7816818, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym53c1010-66-0-<0,*>: FAST-80 WIDE SCSI 160.0 MB/s (12.5 ns, offset 62)
SCSI device sda: 17921835 512-byte hdwr sectors (9176 MB)
Partition check:
sda: sda1 sda2 sda3
sym53c1010-66-0-<1,*>: FAST-80 WIDE SCSI 160.0 MB/s (12.5 ns, offset 62)
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
sdb: sdb1 sdb2 sdb3
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 304k freed
Adding Swap: 1052248k swap-space (priority -1)
Adding Swap: 1052248k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf898b000, IRQ 28
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,18), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi1, channel 0, id 4, lun 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:05:19:9F:A8, IRQ 30.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
ide-floppy driver 0.99.newide
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
Thanks for your time.
Henri
>How-To-Repeat:
I try at least 10 boot and SMP kernel freeze at the same place.
>Fix:
Same config without options SMP and APIC_IO work - I send this PR
from it but I need to go with the 2 PIII running.
PS it's not the advocacy category but let me say that I prefer
FreeBSD instead of Linux on my beast! - maybe I'm to old to change
my habits :-)
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200206131613.g5DGDg7w000842>