Date: Mon, 11 Jun 2007 19:49:12 GMT From: Benjamin Laugraud<B.Laugraud@student.ulg.ac.be> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/113596: Kernel panic with hald Message-ID: <200706111949.l5BJnCgL014621@www.freebsd.org> Resent-Message-ID: <200706111950.l5BJo2Ow071797@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 113596
>Category: i386
>Synopsis: Kernel panic with hald
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Jun 11 19:50:02 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Benjamin Laugraud
>Release: 6.2-RELEASE
>Organization:
>Environment:
FreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Description:
When I try to launch hald, I have the following error :
"Starting hald
panic: kmem_malloc entry not found or misaligned"
I have a fresh installation and compiled GNOME Yesterday.
Copy of dmesg (for the hardware) :
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1041670144 (993 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244711747 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to DOWN
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 5 0 2 0 0 done
All buffers synced.
Uptime: 50m16s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244712109 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1035 (xscreensaver-gl-hel), uid 1001: exited on signal 6
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
mountmsdosfs(): bad FAT32 filesystem
mountmsdosfs(): bad FAT32 filesystem
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 24073 (xscreensaver-gl-hel), uid 1001: exited on signal 6
pid 47065 (xscreensaver-gl-hel), uid 1001: exited on signal 6 (core dumped)
pid 47071 (flurry), uid 1001: exited on signal 6 (core dumped)
pid 47075 (gltext), uid 1001: exited on signal 6 (core dumped)
pid 47076 (gltext), uid 1001: exited on signal 6 (core dumped)
pid 47077 (gltext), uid 1001: exited on signal 6
pid 47090 (glsnake), uid 1001: exited on signal 6 (core dumped)
pid 47091 (glsnake), uid 1001: exited on signal 6
pid 47359 (glmatrix), uid 1001: exited on signal 6 (core dumped)
pid 49682 (glmatrix), uid 1001: exited on signal 6
pid 50836 (glslideshow), uid 1001: exited on signal 6 (core dumped)
pid 51181 (glplanet), uid 1001: exited on signal 6 (core dumped)
pid 52085 (glmatrix), uid 1001: exited on signal 6 (core dumped)
pid 52583 (hypertorus), uid 1001: exited on signal 6 (core dumped)
pid 52686 (jigglypuff), uid 1001: exited on signal 6 (core dumped)
pid 52708 (jigglypuff), uid 1001: exited on signal 6
pid 63240 (xscreensaver-gl-hel), uid 1001: exited on signal 6 (core dumped)
pid 62210 (xscreensaver-gl-hel), uid 1001: exited on signal 6 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 3 0 0 done
All buffers synced.
Uptime: 3h45m58s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244712035 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1155 (xscreensaver-gl-hel), uid 1001: exited on signal 6
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
acd0: FAILURE - READ_CD MEDIUM ERROR asc=0x15 ascq=0x00
g_vfs_done():acd0[READ(offset=472164352, length=2048)]error = 22
acd0: FAILURE - READ_CD ABORTED COMMAND asc=0x5a ascq=0x01
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 22
pid 985 (gconfd-2), uid 1001: exited on signal 6
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 0 0 0 done
All buffers synced.
Uptime: 41m24s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244712109 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1135 (xscreensaver-gl-hel), uid 1001: exited on signal 6
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 986)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 0 0 done
All buffers synced.
Uptime: 27m47s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244711885 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1132 (xscreensaver-gl-hel), uid 1001: exited on signal 6
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 983)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 2 0 0 done
All buffers synced.
Uptime: 2h43m55s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1244.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1033289728 (985 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS735XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xce000000-0xceffffff,0xc0000000-0xc7ffffff irq 5 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 11 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xc800-0xc8ff,0xc400-0xc43f irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
ndis0: <D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.C)> mem 0xcfff0000-0xcfff7fff irq 12 at device 11.0 on pci0
ndis0: NDIS API version: 5.0
NDIS: could not find file rt2561.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: Ethernet address: 00:19:5b:6e:59:67
pci0: <multimedia, audio> at device 13.0 (no driver attached)
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xbc00-0xbc7f mem 0xcffffe80-0xcffffeff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:ba:bb:4f:5b
atapci1: <SiI 0680 UDMA133 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f mem 0xcfffff00-0xcfffffff irq 12 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
umass0: Verbatim Store 'n' Go, rev 2.00/1.00, addr 4
ugen1: Hewlett-Packard hp scanjet 3500c series, rev 1.10/1.00, addr 5
uhid0: Yealink Network Technology Ltd. VOIP USB Phone, rev 1.01/0.00, addr 6, iclass 1/1
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1244712110 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad1: 57241MB <Seagate ST360021A 3.19> at ata0-slave UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
ad6: 76345MB <MAXTOR 6L080J4 A93.0500> at ata3-master UDMA133
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go 5.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
Trying to mount root from ufs:/dev/ad1s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1132 (xscreensaver-gl-hel), uid 1001: exited on signal 6
NDIS: open file /compat/ndis/rt2561.bin failed: 2
NDIS: open file /compat/ndis/rt2561.bin failed: 2
ndis0: link state changed to UP
pcm0: unregister: channel pcm0:play:0:dsp0.0 busy (pid 979)
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
pid 1436 (xscreensaver-gl-hel), uid 1001: exited on signal 6
>How-To-Repeat:
Just start hald
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200706111949.l5BJnCgL014621>