Date: Thu, 20 Jan 2005 22:27:13 +0000 From: Andrew D Wiles <adw@dsmirc.f9.co.uk> To: Doug White <dwhite@gumbysoft.com> Cc: freebsd-sparc64@freebsd.org Subject: Re: [Fwd: MMU Miss panic] Message-ID: <41F03041.1020800@dsmirc.f9.co.uk> In-Reply-To: <20050120141444.F85588@carver.gumbysoft.com> References: <41EEE119.9080907@dsmirc.f9.co.uk> <20050120141444.F85588@carver.gumbysoft.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug White wrote:
>On Wed, 19 Jan 2005, Andrew D Wiles wrote:
>
>
>
>>I recently 'suped to 5.3-p5 and on boot I get a panic about MMU Miss and
>>the system panics and doesn't even drop to OF and I have to do a hard reset.
>>It occurs after the kernel boots and init tries to start on my Ultra 5.
>>I will try to give more information as it is requested but the U5 is a
>>critical fileserver on the network.
>>
>>
>
>I have a 270MHz U5 here but installing freebsd on it is painful. Can you
>post the panic output please?
>
>
>
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #0: Sat Nov 13 07:56:20 GMT 2004
tyr@tyr.asgard.jara23.co.uk:/usr/obj/usr/src/sys/TYR
Timecounter "tick" frequency 269845625 Hz quality 1000
real memory = 134217728 (128 MB)
avail memory = 116793344 (111 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (269.85 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem
0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on
ebus0
sab0: [FAST]
sabtty0: <ttya> on sab0
sabtty1: <ttyb> on sab0
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb
irq 34 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7
irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 8099efc2
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr
0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff
irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1
on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:99:ef:c2
hme0: if_start running deferred for Giant
hme0: [GIANT-LOCKED]
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port
0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007
at device 3.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000-0x2fff at
device 3.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x4000-0x4fff at
device 3.1 on pci2
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x6000-0x6fff at
device 3.2 on pci2
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 3.3 (no driver attached)
Timecounters tick every 10.000 msec
ad0: 39266MB <HDS728040PLAT20/PF1OA21B> [79780/16/63] at ata2-master WDMA2
acd0: CDRW <CRD-8240B/1.24> at ata3-master PIO4
Mounting root from ufs:/dev/ad0a
Pre-seeding PRNG:Panic: Fast Data Access MMU Miss
This happens with and without the patches provided by jhb@ via Kris K in
another thread.
I agree about installing FreeBSD on the U5 painful, I had to resort to a
serial console and tip from another box.
Cheers,
Andrew D Wiles
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41F03041.1020800>