From owner-freebsd-alpha Mon Dec 9 16:49:39 2002 Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1480537B401 for ; Mon, 9 Dec 2002 16:49:34 -0800 (PST) Received: from mail2.sea.registeredsite.com (mail2.sea.registeredsite.com [66.111.73.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 57D0143EEA for ; Mon, 9 Dec 2002 16:49:23 -0800 (PST) (envelope-from opml@terraflux.com) Received: from terraflux.com ([216.122.242.190]) by mail2.sea.registeredsite.com (8.12.6/8.12.6) with ESMTP id gBA0nIea030877; Mon, 9 Dec 2002 19:49:22 -0500 Received: from [192.168.0.40] (dsl-65-184-11-93.telocity.com [65.184.11.93]) by terraflux.com (8.11.0/8.11.0) with ESMTP id gBA0nH510966; Mon, 9 Dec 2002 16:49:17 -0800 (PST) (envelope-from opml@terraflux.com) User-Agent: Microsoft-Entourage/10.1.1.2418 Date: Mon, 09 Dec 2002 16:49:15 -0800 Subject: Re: AlphaServer1200 (5305), FBSD4.7 and Symbios53C875 From: oliver To: Cc: "Schroeder, Aaron" Message-ID: In-Reply-To: <15860.41919.68416.800913@grasshopper.cs.duke.edu> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Drew, Update: I installed the more recent fBSD 5.0 RC-1 (iso) on the temporary disk. This time, the two channles on the 875 card appeared recognized (at least sym1, but what's with the "faqiled to alloc ram" for sym2 (dmesg)?). I attached the StorageWorks shelf with two drives, and the setup shows -in fact- da0 (the temp drive on embedded scsi), da1 and da2 from the 875 controller. However, if I select da1 (or da2) via the setup and enter the FreeBSD Disklabel Editor, there is no disk-information or space to assign! The line "Disk: etc Partition: etc Free: etc" is completely missing. So, I thought, ok let's do it the hard way. (Like I know what I am doing...): # dd if=/dev/zero of=/dev/da1 bs=1k count=1 # disklabel -Brw da2 auto # disklabel -e da2 Which launches VI with the following (non-specific) info: # /dev/da2c: type: unknown disk: amnesiac label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 522 sectors/unit: 8388315 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 8388315 0 unused 0 0 # (Cyl. 0 - 522*) ~ On boot, the driver appears to receive some info about the seagate and quantum on the 875 card, but this appears "incomplete or lost" for "disklabel"?! (i.e. Rpm etc). Anyhow, after I save the VI form, the drive also appears in the Disklabel editor via /stand/sysinstall. Weird. What do you think? And below is the info you requested: carmen# pciconf -lv sym0@pci0:1:0: class=0x010000 card=0x00000000 chip=0x00011000 rev=0x02 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'LSI53C810/810A/810AE PCI-SCSI I/O Processor' class = mass storage subclass = SCSI pcib2@pci0:2:0: class=0x060400 card=0x00000000 chip=0x00241011 rev=0x02 hdr=0x01 vendor = 'Digital Equipment Corporation' device = '21151/2 PCI to PCI Bridge' class = bridge subclass = PCI-PCI fxp0@pci0:4:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet sym1@pci2:0:0: class=0x010000 card=0x00000000 chip=0x000f1000 rev=0x04 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'LSI53C875/E,LSI53C876/E PCI to Ultra SCSI I/O Processor' class = mass storage subclass = SCSI none0@pci2:1:0: class=0x010000 card=0x00000000 chip=0x000f1000 rev=0x04 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'LSI53C875/E,LSI53C876/E PCI to Ultra SCSI I/O Processor' class = mass storage subclass = SCSI de0@pci2:2:0: class=0x020000 card=0x500a1011 chip=0x00091011 rev=0x22 hdr=0x00 vendor = 'Digital Equipment Corporation' device = 'DecChip 21140 Fast Ethernet Adapter' class = network subclass = ethernet eisab0@pci0:1:0: class=0x000000 card=0x00000000 chip=0x04828086 rev=0x15 hdr=0x00 vendor = 'Intel Corporation' device = '82375EB PCI-EISA Bridge (PCEB)' class = old subclass = non-VGA display device none1@pci0:2:0: class=0x880000 card=0x88000000 chip=0x88115333 rev=0x44 hdr=0x00 vendor = 'S3 Incorporated' device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' carmen# DMESG OUTPUT: Unrecognized boot flag '0'. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RC1 #0: Mon Dec 9 16:05:50 PST 2002 opi@carmen.terraflux.net:/usr/src/sys/alpha/compile/CARMEN Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc000073a000. AlphaServer 4100 DIGITAL Server 5000 Model 5305 6533A 5/533 4MB, 531MHz 8192 byte page size, 2 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x4000200020117 real memory = 534757376 (509 MB) avail memory = 508461056 (484 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Initializing GEOMetry subsystem mcbus0: pcib0: at mcbus0 gid 7 mid 5 pcib0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2 pci0: on pcib0 illegal PCI extended capability offset 8266240 sym0: <810> port 0x1ffee00-0x1ffeeff mem 0x7cfef00-0x7cfefff irq 4 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: interrupting at IRQ 0x10 intA (vec 0xb40) pcib2: at device 2.0 on pci0 pci2: on pcib2 sym1: <875> port 0x1fffd00-0x1fffdff mem 0x7d9e000-0x7d9ffff,0x7d9dd00-0x7d9ddff irq 8 at device 0.0 on pci2 sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: interrupting at IRQ 0x0 intA (vec 0xb80) sym2: <875> port 0x1fffe00-0x1fffeff mem 0x7d9f000-0x7d9ffff,0x7d9de00-0x7d9deff irq 9 at device 1.0 on pci2 sym2: failed to allocate RAM resources device_probe_and_attach: sym2 attach returned 6 de0: port 0x1ffff00-0x1ffff7f mem 0x7d9df00-0x7d9df7f irq 10 at device 2.0 on pci2 de0: interrupting at IRQ 0x0 intA (vec 0xb80) de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:06:2b:00:0c:c5 de0: enabling 10baseT port fxp0: port 0x1ffef00-0x1ffef3f mem 0x7e00000-0x7efffff,0x7cff000-0x7cfffff irq 16 at device 4.0 on pci0 fxp0: interrupting at IRQ 0x8 intA (vec 0xc00) fxp0: Ethernet address 00:90:27:8e:5c:13 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: at mcbus0 gid 7 mid 4 pcib1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2 pci1: on pcib1 eisab0: at device 1.0 on pci1 isa0: on eisab0 pci1: at device 2.0 (no driver attached) ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: interrupting at ISA irq 14 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: interrupting at ISA irq 15 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 mcclock0: at port 0x70-0x71 on isa0 ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Polled port ppc0: interrupting at ISA irq 7 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 0.833 msec Timecounter "i8254" frequency 1193182 Hz Waiting 15 seconds for SCSI devices to settle (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. da1 at sym1 bus 0 target 0 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C) da2 at sym1 bus 0 target 1 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: cd present [517192 x 512 byte records] SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da0a carmen# I have not tested the da0 or da2 on the 875 pci. Let's see what happens. By the way, can I look up some of this information required via the VI "form" for the Seagate or Quantum on the web? Cheers, Oliver > The 53C875 should be found and should work in AS1200 in 5.0. If its > not being found, that's a bug that needs addressing. It does not and > will not ever work on a secondary hose of a multi-hose (like the > AS1200) machine on 4.x. > > Can you send verbose dmesg and pciconf -lv output from 5.0DP2 to the > list? > > Drew > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message