Date: Sat, 18 Sep 1999 07:09:19 +0200 (CEST) From: Thomas Graichen <graichen@innominate.de> To: hackers@FreeBSD.org Subject: mysterious FreeBSD hardware problems Message-ID: <Pine.BSF.4.10.9909180707280.6145-100000@cello.innominate.local>
next in thread | raw e-mail | index | archive | help
(sorry if this appears here twice - but as far as i can see the first
try didn't make it here due to non optimal configuration of my news
to mailinglist gateway :-)
i'm a bit at the end of my phantasie with this machine i'm writing
this here on ... something mystically seems to be broken with
running FreeBSD on it ... first mystical thing is that the moused
takes about a minute to start but workes then fine ... ok after
that it boots on into x and works - but everything is very slow
somehow as if the machine is under heavy load - but it isn't - one
other thing noticable is that it produces very high rates of
interupts on the serial ports with the mouse sometimes ... ok - and
in addition to all this it won't reboot - if i try to reboot it
via reboot/halt/shutdown - it starts to kill processes and nothing
more happens - but via ctrl-alt-del or an "kill -INT 1" which that
does it reboots fine ... has anyone ever seen this on any machine
or any idea where this might come from ? - some more details: the
machine runs fine with linux - also i've had another machine
(different board) with exacly the same symptoms and there turning
on apm in the bios and in the kernel fixed the problems all together
but on this board i can't turn on apm - because it does not detect
the amd cpu and i think thus refuses to turn on apm (it prints apm
disabled at bootup even if i set it to enabled in the bios) - i
would really like to see FreeBSD running completely on this machine
here are some more details - first a "boot -v" output and second
a ktrace of the hanging "halt" ...
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #1: Mon Sep 13 05:43:35 CEST 1999
root@battus.at.home:/usr/src/sys/compile/BATTUS
Calibrating clock(s) ... TSC clock: 74378519 Hz, i8254 clock: 1193729 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 74345070 Hz
CPU: AMD K5 model 0 (74.35-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x500 Stepping=0
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 41943040 (40960K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0027d000 - 0x027fdfff, 39325696 bytes (9601 pages)
avail memory = 38395904 (37496K bytes)
Found BIOS32 Service Directory header at 0xc00f6f10
Entry = 0xf6f20 (0xc00f6f20) Rev = 0 Len = 1
PCI BIOS entry at 0x6f41
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000f9500
Preloaded elf kernel "kernel" at 0xc0270000.
Preloaded elf module "if_tun.ko" at 0xc027009c.
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=122d8086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x122d, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82437FX PCI cache memory controller> rev 0x01 on pci0.0.0
CPU Inactivity timer: clocks
Peer Concurrency: enabled
CPU-to-PCI Write Bursting: enabled
PCI Streaming: enabled
Bus Concurrency: enabled
Cache: 256K pipelined-burst secondary; L1 enabled
DRAM: no memory hole, 50 MHz refresh
Read burst timing: x-2-2-2/x-3-3-3
Write burst timing: x-3-3-3
RAS-CAS delay: 2 clocks
found-> vendor=0x8086, dev=0x122e, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0
I/O Recovery Timing: 8-bit 8 clocks, 16-bit 4 clocks
Extended BIOS: disabled
Lower BIOS: disabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: disabled, B: IRQ12, C: disabled, D: disabled
MB0: disabled, MB1: disabled
found-> vendor=0x8086, dev=0x1230, revid=0x02
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 00008000, size 4
ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 2
intel_piix_status: primary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 2
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 04 from port: 00008002
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 04 from port: 0000800a
found-> vendor=0x5333, dev=0x8811, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[0]: type 1, range 32, base ff000000, size 23
vga0: <S3 Trio graphics accelerator> rev 0x00 int a irq 12 on pci0.19.0
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <12 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 10 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:12:fa:ae, type SMC8216/SMC8216C (16 bit)
bpf: ed0 attached
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 9782438 bytes/sec
bzero() bandwidth = 32901230 bytes/sec
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
mss0 at 0x530 irq 11 drq 1 on isa
snd0: <MS Sound System0 (AD1845)>
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa
wdc0: unit 0 (wd0): <FUJITSU MPB3021ATU>, 32-bit, multi-block-16
wd0: 2062MB (4224150 sectors), 4470 cyls, 15 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc1 at 0x170-0x177 irq 15 flags 0x80ff80ff on isa
wdc1: unit 0 (atapi): <LTN204/KL43>, removable, intr, dma, iordis
acd0: drive speed 3617KB/sec, 120KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc: parallel port found at 0x378
ppc0: SPP
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <generic parallel i/o> on ppbus 0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: can't connect to the drive
imasks: bio c008c040, tty c003081a, net c0060480
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
Considering FFS root f/s.
changing root device to wd0s1a
wd0s1: type 0xa5, start 63, end = 4217471, size 4217409 : OK
ffs_mountfs: superblock updated for soft updates
500 halt GIO fd 3 wrote 44 bytes
"~\0\0\0\0\0\0\0shutdown\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
\0Y\M^N\M-b7"
500 halt RET write 44/0x2c
500 halt CALL close(0x3)
500 halt RET close 0
500 halt CALL sync
500 halt RET sync 0
500 halt CALL kill(0x1,0x12)
500 halt RET kill 0
500 halt CALL sigaction(0x1,0xbfbfdbf8,0xbfbfdbec)
500 halt RET sigaction 0
500 halt CALL kill(0xffffffff,0xf)
500 halt RET kill 0
500 halt CALL nanosleep(0xbfbfdc00,0xbfbfdbf8)
500 halt PSIG SIGINT SIG_DFL
... and here it does nothing more - i can interrupt the halt simply by
ctrl-c and i'm back at the console ...
does anyone have any idea what it might be or what i can do to find it
out - any help is really apreciated ...
a lot of thanks in advance
t
--
graichen@innominate.de
innominate AG
networking people
fon: +49.30.308806-13 fax: -77 web: http://innominate.de pgp: /pgp/tg
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909180707280.6145-100000>