Date: Wed, 18 Nov 2009 14:33:18 +0100 From: jelmer <sociologieopzaterdag@gmail.com> To: freebsd-jail@freebsd.org Subject: Re: Broadcast under Jail problems Message-ID: <4c7a12550911180533y6bed77f5m222725c6a3ca87be@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
(create a virtual network interface, and use packet filter) # ifconfig lo1 create # ifconfig lo1 inet 10.0.1.1 netmask 255.255.255.0 # touch /etc/start_if.lo1 # echo "ifconfig lo1 create" >> /etc/start_if.lo1 # cp /usr/share/examples/pf/pf.conf /etc/ (existance of pf.conf is just necessary, later I setup a complete one) (allow networking for jails - required for the installation of ports) * # echo 'nat on bge0 from lo1:network to any -> (bge0)' >> /etc/pf.conf # pfctl -d # pfctl -e -f /etc/pf.conf # echo ' and use this in rc.conf interfaces=3D"lo0 bge0" cloned_interfaces=3D"lo1" ifconfig_re0=3D"inet <PUBL_IP> netmask 255.255.255.128 -rxcsum -txcsum" ifconfig_re0_alias0=3D"inet <PUBL_IP_2> netmask 255.255.255.128" ifconfig_lo1=3D"inet 10.0.1.1 netmask 255.255.255.0" ifconfig_lo1_alias0=3D"inet 10.0.1.2/24" ifconfig_lo1_alias1=3D"inet 10.0.1.3/32" On Tue, Nov 17, 2009 at 1:00 PM, <freebsd-jail-request@freebsd.org> wrote: > Send freebsd-jail mailing list submissions to > freebsd-jail@freebsd.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freebsd.org/mailman/listinfo/freebsd-jail > or, via email, send a message with subject or body 'help' to > freebsd-jail-request@freebsd.org > > You can reach the person managing the list at > freebsd-jail-owner@freebsd.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of freebsd-jail digest..." > > > Today's Topics: > > 1. Re: Broadcast under Jail problems (Vagif Zeynalov) > 2. Networking from jail (Scheithauer, Lars (FH)) > 3. Networking from jail - errata (Scheithauer, Lars (FH)) > 4. Re: Networking from jail - errata (Bjoern A. Zeeb) > 5. AW: Networking from jail - errata (Scheithauer, Lars (FH)) > 6. Re: AW: Networking from jail - errata (Bjoern A. Zeeb) > 7. AW: AW: Networking from jail - errata (Scheithauer, Lars (FH)) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 16 Nov 2009 16:14:59 +0300 > From: "Vagif Zeynalov" <vagif@zeynalov.com> > Subject: Re: Broadcast under Jail problems > To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> > Cc: freebsd-jail@freebsd.org > Message-ID: <A9332ADE8F494076A02DAFF06DAADA16@vagifPC> > Content-Type: text/plain; format=3Dflowed; charset=3D"iso-8859-1"; > reply-type=3Dresponse > > > >> ...I can provide more details if it will be necessary... > > > > error ogs from the application would be interesting to see which > > (sys)call return which error so that we can narrow it down. > > > > You know, to make the answer I just rebuild the mediatomb on the clear ja= il > machine and... the problem has been disappeared! > It's very strange, because I already did it before few times. > > Whatever, sorry guys for disturb. ;-)) > I have to investigate, what did I change at last night in the system. > > Regards, > Vagif > > > > ------------------------------ > > Message: 2 > Date: Tue, 17 Nov 2009 10:18:59 +0100 > From: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Subject: Networking from jail > To: <freebsd-jail@freebsd.org> > Message-ID: > < > 26040005B7F3AA41A0345BCE386CA09701C62A79@FHCLUSRV-EX.dcs.fh-heidelberg.de= > > > Content-Type: text/plain; charset=3D"us-ascii" > > Hi everyone! > > I'm having a little trouble with my jail's networking and I'm not sure > what to make of it. > > My jailhost has an IP of x.y.z.48, my test jail is x.y.z.49. The > jailhost has both IP-adresses, the jail has just it's own: > > Jail# ifconfig > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM= , > TSO4> > ether xx:xx:xx:xx:xx:10 > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > media: Ethernet autoselect (1000baseSX <full-duplex>) > status: active > [...] > Host# ifconfig > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM= , > TSO4> > ether xx:xx:xx:xx:xx:10 > inet x.y.z.61 netmask 0xffffffc0 broadcast x.y.z.63 > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > media: Ethernet autoselect (1000baseSX <full-duplex>) > status: active > [...] > > I am able to access the ssh-server running on the jail, and I am able to > access the proxyserver of our network via telnet and get some pages of > the internet. However, if I want to install something from the ports, > the jail is unable to fetch it: > > Jail# cd /usr/ports/ftp/wget > Jail# make > =3D=3D=3D> Vulnerability check disabled, database not found > =3D=3D=3D> Found saved configuration for wget-1.11.4_1 > =3D> wget-1.11.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. > =3D> Attempting to fetch from http://ftp.gnu.org/gnu/wget/. > fetch: http://ftp.gnu.org/gnu/wget/wget-1.11.4.tar.bz2: Operation timed > out > =3D> Attempting to fetch from ftp://ftp.gnu.org/gnu/wget/. > [...] > > I've set the appropriate environment variables HTTP_PROXY, HTTPS_PROXY > and FTP_PROXY. If I test the connection with netcat, I get the following > error message: > # nc -zvw 1 -x 'proxy.example.com:8080' www.freebsd.org 80 > nc: read failed (0/3): Broken pipe > > The funny thing is, that I have no problem installing ports from the > Host-system. From what I can tell, all the config files are correct: > > Jail# cat /etc/rc.conf > sshd_enable=3D"YES" > ifconfig_bce0=3D"inet x.y.z.60 netmask 255.255.255.192" > defaultrouter=3D"x.y.z.62" > hostname=3D"jail.example.com" > > Host# cat /etc/rc.conf > sshd_enable=3D"NO" > ifconfig_bce0=3D"inet x.y.z.61 netmask 255.255.255.192" > defaultrouter=3D"x.y.z.62" > hostname=3D"host.example.com" > ipv6_enable=3D"NO" > jail_enable=3D"YES" > jail_set_hostname_allow=3D"NO" > jail_list=3D"jail" > jail_jail_hostname=3D"jail" > jail_jail_ip=3D"x.y.z.60" jail_jail_rootdir=3D"my/jail/root" > jail_jail_devfs_enable=3D"YES" > > Any ideas? > > Best Regards, > Lars > > > ------------------------------ > > Message: 3 > Date: Tue, 17 Nov 2009 10:48:59 +0100 > From: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Subject: Networking from jail - errata > To: <freebsd-jail@freebsd.org> > Message-ID: > < > 26040005B7F3AA41A0345BCE386CA09701C62A7A@FHCLUSRV-EX.dcs.fh-heidelberg.de= > > > Content-Type: text/plain; charset=3D"iso-8859-1" > > Quick note: > Forgot to replace two values. > Jail - x.y.z.61 > Host - x.y.z.60 > Router - x.y.z.62 > > > -----Urspr=FCngliche Nachricht----- > Von: owner-freebsd-jail@freebsd.org [mailto:owner-freebsd-jail@freebsd.or= g] > Im Auftrag von Scheithauer, Lars (FH) > Gesendet: Dienstag, 17. November 2009 10:19 > An: freebsd-jail@freebsd.org > Betreff: Networking from jail > > Hi everyone! > > I'm having a little trouble with my jail's networking and I'm not sure > what to make of it. > > My jailhost has an IP of x.y.z.48, my test jail is x.y.z.49. The > jailhost has both IP-adresses, the jail has just it's own: > > Jail# ifconfig > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM= , > TSO4> > ether xx:xx:xx:xx:xx:10 > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > media: Ethernet autoselect (1000baseSX <full-duplex>) > status: active > [...] > Host# ifconfig > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM= , > TSO4> > ether xx:xx:xx:xx:xx:10 > inet x.y.z.61 netmask 0xffffffc0 broadcast x.y.z.63 > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > media: Ethernet autoselect (1000baseSX <full-duplex>) > status: active > [...] > > I am able to access the ssh-server running on the jail, and I am able to > access the proxyserver of our network via telnet and get some pages of > the internet. However, if I want to install something from the ports, > the jail is unable to fetch it: > > Jail# cd /usr/ports/ftp/wget > Jail# make > =3D=3D=3D> Vulnerability check disabled, database not found > =3D=3D=3D> Found saved configuration for wget-1.11.4_1 > =3D> wget-1.11.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. > =3D> Attempting to fetch from http://ftp.gnu.org/gnu/wget/. > fetch: http://ftp.gnu.org/gnu/wget/wget-1.11.4.tar.bz2: Operation timed > out > =3D> Attempting to fetch from ftp://ftp.gnu.org/gnu/wget/. > [...] > > I've set the appropriate environment variables HTTP_PROXY, HTTPS_PROXY > and FTP_PROXY. If I test the connection with netcat, I get the following > error message: > # nc -zvw 1 -x 'proxy.example.com:8080' www.freebsd.org 80 > nc: read failed (0/3): Broken pipe > > The funny thing is, that I have no problem installing ports from the > Host-system. From what I can tell, all the config files are correct: > > Jail# cat /etc/rc.conf > sshd_enable=3D"YES" > ifconfig_bce0=3D"inet x.y.z.60 netmask 255.255.255.192" > defaultrouter=3D"x.y.z.62" > hostname=3D"jail.example.com" > > Host# cat /etc/rc.conf > sshd_enable=3D"NO" > ifconfig_bce0=3D"inet x.y.z.61 netmask 255.255.255.192" > defaultrouter=3D"x.y.z.62" > hostname=3D"host.example.com" > ipv6_enable=3D"NO" > jail_enable=3D"YES" > jail_set_hostname_allow=3D"NO" > jail_list=3D"jail" > jail_jail_hostname=3D"jail" > jail_jail_ip=3D"x.y.z.60" > jail_jail_rootdir=3D"my/jail/root" > jail_jail_devfs_enable=3D"YES" > > Any ideas? > > Best Regards, > Lars > _______________________________________________ > freebsd-jail@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-jail > To unsubscribe, send any mail to "freebsd-jail-unsubscribe@freebsd.org" > > > ------------------------------ > > Message: 4 > Date: Tue, 17 Nov 2009 10:40:54 +0000 (UTC) > From: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> > Subject: Re: Networking from jail - errata > To: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Cc: freebsd-jail@freebsd.org > Message-ID: <20091117103601.G37440@maildrop.int.zabbadoz.net> > Content-Type: text/plain; charset=3D"iso-8859-1" > > On Tue, 17 Nov 2009, Scheithauer, Lars (FH) wrote: > > Hi, > > > Quick note: > > Forgot to replace two values. > > Jail - x.y.z.61 > > Host - x.y.z.60 > > Router - x.y.z.62 > > > > > > -----Urspr=FCngliche Nachricht----- > > Von: owner-freebsd-jail@freebsd.org [mailto: > owner-freebsd-jail@freebsd.org] Im Auftrag von Scheithauer, Lars (FH) > > Gesendet: Dienstag, 17. November 2009 10:19 > > An: freebsd-jail@freebsd.org > > Betreff: Networking from jail > > > > Hi everyone! > > > > I'm having a little trouble with my jail's networking and I'm not sure > > what to make of it. > > > > My jailhost has an IP of x.y.z.48, my test jail is x.y.z.49. The > > jailhost has both IP-adresses, the jail has just it's own: > > > > Jail# ifconfig > > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 > > > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS= UM, > > TSO4> > > ether xx:xx:xx:xx:xx:10 > > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > > media: Ethernet autoselect (1000baseSX <full-duplex>) > > status: active > > [...] > > Host# ifconfig > > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 > > > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS= UM, > > TSO4> > > ether xx:xx:xx:xx:xx:10 > > inet x.y.z.61 netmask 0xffffffc0 broadcast x.y.z.63 > > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > > media: Ethernet autoselect (1000baseSX <full-duplex>) > > status: active > > [...] > > > > I am able to access the ssh-server running on the jail, and I am able t= o > > access the proxyserver of our network via telnet and get some pages of > > the internet. However, if I want to install something from the ports, > > the jail is unable to fetch it: > > > > Jail# cd /usr/ports/ftp/wget > > Jail# make > > =3D=3D=3D> Vulnerability check disabled, database not found > > =3D=3D=3D> Found saved configuration for wget-1.11.4_1 > > =3D> wget-1.11.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/= . > > =3D> Attempting to fetch from http://ftp.gnu.org/gnu/wget/. > > fetch: http://ftp.gnu.org/gnu/wget/wget-1.11.4.tar.bz2: Operation timed > > out > > =3D> Attempting to fetch from ftp://ftp.gnu.org/gnu/wget/. > > [...] > > > > I've set the appropriate environment variables HTTP_PROXY, HTTPS_PROXY > > and FTP_PROXY. If I test the connection with netcat, I get the followin= g > > error message: > > # nc -zvw 1 -x 'proxy.example.com:8080' www.freebsd.org 80 > > nc: read failed (0/3): Broken pipe > > The usual thing I am interested at that point is - does name > resolution work properly from within the jail? /etc/resolv.conf setup > correctly etc? > > > > > The funny thing is, that I have no problem installing ports from the > > Host-system. From what I can tell, all the config files are correct: > > > > Jail# cat /etc/rc.conf > > sshd_enable=3D"YES" > > ifconfig_bce0=3D"inet x.y.z.60 netmask 255.255.255.192" > > defaultrouter=3D"x.y.z.62" > > hostname=3D"jail.example.com" > > That's not going to work, really (the ifconfig, defaultrouter, and > unless you changed the defaults on the host system not even the > hostname). You should actually remove those. > > > > Host# cat /etc/rc.conf > > sshd_enable=3D"NO" > > ifconfig_bce0=3D"inet x.y.z.61 netmask 255.255.255.192" > > defaultrouter=3D"x.y.z.62" > > hostname=3D"host.example.com" > > ipv6_enable=3D"NO" > > jail_enable=3D"YES" > > jail_set_hostname_allow=3D"NO" > > jail_list=3D"jail" > > jail_jail_hostname=3D"jail" > > jail_jail_ip=3D"x.y.z.60" > > jail_jail_rootdir=3D"my/jail/root" > > jail_jail_devfs_enable=3D"YES" > > That doesn't really match your ifconfig output from above; something > on the host system would have to set the IP address of the host. I > would expect something like (you may have mixed jail and host > addresses so properly sort this): > > # host system IP address > ifconfig_bce0=3Dinet x.y.z.61 netmask 255.255.255.192" > # jail IP address > ifconfig_bce0_alias0=3Dinet x.y.z.60 netmask 255.255.255.255" > > Note that the alias has a /32 netmask. > > > /bz > > -- > Bjoern A. Zeeb It will not break if you know what you are doing. > > ------------------------------ > > Message: 5 > Date: Tue, 17 Nov 2009 12:18:40 +0100 > From: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Subject: AW: Networking from jail - errata > To: <freebsd-jail@freebsd.org> > Cc: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> > Message-ID: > < > 26040005B7F3AA41A0345BCE386CA09701C62A7D@FHCLUSRV-EX.dcs.fh-heidelberg.de= > > > Content-Type: text/plain; charset=3D"iso-8859-1" > > Hi Bjoern, > > thanks for the clarification, I changed the values according to your > suggestions. However, it did not resolve the problem. > > I've checked the proxy logfiles and it seems, that the Makefile(s) don't > try to access the proxy at all while fetching files. Is there any reason, > why the Makefile(s) should not use the *_PROXY-variables on the jails? > > Best Regards, > Lars > > > > -----Urspr=FCngliche Nachricht----- > Von: owner-freebsd-jail@freebsd.org [mailto:owner-freebsd-jail@freebsd.or= g] > Im Auftrag von Bjoern A. Zeeb > Gesendet: Dienstag, 17. November 2009 11:41 > An: Scheithauer, Lars (FH) > Cc: freebsd-jail@freebsd.org > Betreff: Re: Networking from jail - errata > > On Tue, 17 Nov 2009, Scheithauer, Lars (FH) wrote: > > Hi, > > > Quick note: > > Forgot to replace two values. > > Jail - x.y.z.61 > > Host - x.y.z.60 > > Router - x.y.z.62 > > > > > > -----Urspr=FCngliche Nachricht----- > > Von: owner-freebsd-jail@freebsd.org [mailto: > owner-freebsd-jail@freebsd.org] Im Auftrag von Scheithauer, Lars (FH) > > Gesendet: Dienstag, 17. November 2009 10:19 > > An: freebsd-jail@freebsd.org > > Betreff: Networking from jail > > > > Hi everyone! > > > > I'm having a little trouble with my jail's networking and I'm not sure > > what to make of it. > > > > My jailhost has an IP of x.y.z.48, my test jail is x.y.z.49. The > > jailhost has both IP-adresses, the jail has just it's own: > > > > Jail# ifconfig > > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 > > > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS= UM, > > TSO4> > > ether xx:xx:xx:xx:xx:10 > > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > > media: Ethernet autoselect (1000baseSX <full-duplex>) > > status: active > > [...] > > Host# ifconfig > > bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 > > > > options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS= UM, > > TSO4> > > ether xx:xx:xx:xx:xx:10 > > inet x.y.z.61 netmask 0xffffffc0 broadcast x.y.z.63 > > inet x.y.z.60 netmask 0xffffffc0 broadcast x.y.z.63 > > media: Ethernet autoselect (1000baseSX <full-duplex>) > > status: active > > [...] > > > > I am able to access the ssh-server running on the jail, and I am able t= o > > access the proxyserver of our network via telnet and get some pages of > > the internet. However, if I want to install something from the ports, > > the jail is unable to fetch it: > > > > Jail# cd /usr/ports/ftp/wget > > Jail# make > > =3D=3D=3D> Vulnerability check disabled, database not found > > =3D=3D=3D> Found saved configuration for wget-1.11.4_1 > > =3D> wget-1.11.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/= . > > =3D> Attempting to fetch from http://ftp.gnu.org/gnu/wget/. > > fetch: http://ftp.gnu.org/gnu/wget/wget-1.11.4.tar.bz2: Operation timed > > out > > =3D> Attempting to fetch from ftp://ftp.gnu.org/gnu/wget/. > > [...] > > > > I've set the appropriate environment variables HTTP_PROXY, HTTPS_PROXY > > and FTP_PROXY. If I test the connection with netcat, I get the followin= g > > error message: > > # nc -zvw 1 -x 'proxy.example.com:8080' www.freebsd.org 80 > > nc: read failed (0/3): Broken pipe > > The usual thing I am interested at that point is - does name > resolution work properly from within the jail? /etc/resolv.conf setup > correctly etc? > > > > > The funny thing is, that I have no problem installing ports from the > > Host-system. From what I can tell, all the config files are correct: > > > > Jail# cat /etc/rc.conf > > sshd_enable=3D"YES" > > ifconfig_bce0=3D"inet x.y.z.60 netmask 255.255.255.192" > > defaultrouter=3D"x.y.z.62" > > hostname=3D"jail.example.com" > > That's not going to work, really (the ifconfig, defaultrouter, and > unless you changed the defaults on the host system not even the > hostname). You should actually remove those. > > > > Host# cat /etc/rc.conf > > sshd_enable=3D"NO" > > ifconfig_bce0=3D"inet x.y.z.61 netmask 255.255.255.192" > > defaultrouter=3D"x.y.z.62" > > hostname=3D"host.example.com" > > ipv6_enable=3D"NO" > > jail_enable=3D"YES" > > jail_set_hostname_allow=3D"NO" > > jail_list=3D"jail" > > jail_jail_hostname=3D"jail" > > jail_jail_ip=3D"x.y.z.60" > > jail_jail_rootdir=3D"my/jail/root" > > jail_jail_devfs_enable=3D"YES" > > That doesn't really match your ifconfig output from above; something > on the host system would have to set the IP address of the host. I > would expect something like (you may have mixed jail and host > addresses so properly sort this): > > # host system IP address > ifconfig_bce0=3Dinet x.y.z.61 netmask 255.255.255.192" > # jail IP address > ifconfig_bce0_alias0=3Dinet x.y.z.60 netmask 255.255.255.255" > > Note that the alias has a /32 netmask. > > > /bz > > -- > Bjoern A. Zeeb It will not break if you know what you are doing. > > > ------------------------------ > > Message: 6 > Date: Tue, 17 Nov 2009 11:27:40 +0000 (UTC) > From: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> > Subject: Re: AW: Networking from jail - errata > To: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Cc: freebsd-jail@freebsd.org > Message-ID: <20091117112535.L37440@maildrop.int.zabbadoz.net> > Content-Type: TEXT/PLAIN; charset=3DUS-ASCII; format=3Dflowed > > On Tue, 17 Nov 2009, Scheithauer, Lars (FH) wrote: > > Hi, > > > thanks for the clarification, I changed the values according to your > suggestions. However, it did not resolve the problem. > > Did you aslo check resolv.conf inside the jail? > Does host www.freebsd.org work? > > > > I've checked the proxy logfiles and it seems, that the Makefile(s) don'= t > try to access the proxy at all while fetching files. Is there any reason, > why the Makefile(s) should not use the *_PROXY-variables on the jails? > > I assume the proxy is squid and that the proxy itself works? > What if you set the http_proxy variables to an IP address rather than > the name (don't use 127.0.0.1 as address, just to rule that out as > well). > > /bz > > -- > Bjoern A. Zeeb It will not break if you know what you are doing. > > > ------------------------------ > > Message: 7 > Date: Tue, 17 Nov 2009 12:40:51 +0100 > From: "Scheithauer, Lars (FH)" <Lars.Scheithauer@fh-heidelberg.de> > Subject: AW: AW: Networking from jail - errata > To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> > Cc: freebsd-jail@freebsd.org > Message-ID: > < > 26040005B7F3AA41A0345BCE386CA09701C62A80@FHCLUSRV-EX.dcs.fh-heidelberg.de= > > > Content-Type: text/plain; charset=3D"iso-8859-1" > > Hi Bjoern, > > I did, but the error was somewhere else. I set the proxy through > set http_proxy=3D"http://proxy.example.com:8080" > while the correct version would be > setenv http_proxy http://proxy.example.com:8080 > > In both cases, "echo $http_proxy" returns the correct entry. Could you > explain the difference between set and setenv? > > Best Regards, > Lars > > > > -----Urspr=FCngliche Nachricht----- > Von: Bjoern A. Zeeb [mailto:bzeeb-lists@lists.zabbadoz.net] > Gesendet: Dienstag, 17. November 2009 12:28 > An: Scheithauer, Lars (FH) > Cc: freebsd-jail@freebsd.org > Betreff: Re: AW: Networking from jail - errata > > On Tue, 17 Nov 2009, Scheithauer, Lars (FH) wrote: > > Hi, > > > thanks for the clarification, I changed the values according to your > suggestions. However, it did not resolve the problem. > > Did you aslo check resolv.conf inside the jail? > Does host www.freebsd.org work? > > > > I've checked the proxy logfiles and it seems, that the Makefile(s) don'= t > try to access the proxy at all while fetching files. Is there any reason, > why the Makefile(s) should not use the *_PROXY-variables on the jails? > > I assume the proxy is squid and that the proxy itself works? > What if you set the http_proxy variables to an IP address rather than > the name (don't use 127.0.0.1 as address, just to rule that out as > well). > > /bz > > -- > Bjoern A. Zeeb It will not break if you know what you are doing. > > > ------------------------------ > > _______________________________________________ > freebsd-jail@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-jail > To unsubscribe, send any mail to "freebsd-jail-unsubscribe@freebsd.org" > > > End of freebsd-jail Digest, Vol 120, Issue 2 > ******************************************** >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c7a12550911180533y6bed77f5m222725c6a3ca87be>