Date: Fri, 14 Apr 2017 18:02:37 -0400 From: "James B. Byrne" <byrnejb@harte-lyne.ca> To: byrnejb@harte-lyne.ca Cc: freebsd-questions@freebsd.org Subject: Re: Following upgrade to FreeBSD-11.0p9 unable to start bhyve guests Message-ID: <30744758b2b010a1abe0295c34af930d.squirrel@webmail.harte-lyne.ca> In-Reply-To: <a973187729d906d5e89482f74d4c8d73.squirrel@webmail.harte-lyne.ca> References: <a973187729d906d5e89482f74d4c8d73.squirrel@webmail.harte-lyne.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, April 14, 2017 17:38, James B. Byrne wrote:
>
> What provides "virtual switch 'public'"? And, how do I configure
> things so that it is created and found?
>
Just to clarify things. I did try to create the public switch using
the recommended procedure. It just did not work:
# vm switch create public
/usr/local/sbin/vm: ERROR: switch public already exists
# vm switch add public igb0
/usr/local/sbin/vm: ERROR: unable to locate virtual switch
But:
# vm switch list
NAME TYPE IDENT VLAN NAT PORTS
public auto - - - igb0
#ifconfig
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:25:90:77:14:e4
inet 216.185.71.43 netmask 0xffffff00 broadcast 216.185.71.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:25:90:77:14:e5
inet 192.168.71.43 netmask 0xffffff00 broadcast 192.168.71.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:b4:59:30:76:00
nd6 options=9<PERFORMNUD,IFDISABLED>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 0 ifcost 0 port 0
tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
ether 00:bd:2c:93:f7:00
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
groups: tap
pflog0: flags=100<PROMISC> metric 0 mtu 33160
groups: pflog
--
*** e-Mail is NOT a SECURE channel ***
Do NOT transmit sensitive data via e-Mail
Do NOT open attachments nor follow links sent by e-Mail
James B. Byrne mailto:ByrneJB@Harte-Lyne.ca
Harte & Lyne Limited http://www.harte-lyne.ca
9 Brockley Drive vox: +1 905 561 1241
Hamilton, Ontario fax: +1 905 561 0757
Canada L8E 3C3
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?30744758b2b010a1abe0295c34af930d.squirrel>