Date: Sun, 17 Nov 2002 22:48:06 -0800 From: Chuck Tuffli <chuck_tuffli@agilent.com> To: "Long, Scott" <Scott_Long@adaptec.com> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: SIM as loadable module? Message-ID: <20021118064805.GA7533@thegrail.rose.agilent.com> In-Reply-To: <6100BCEB85F8E244959C756C04E0EDD161CB79@otcexc01.otc.adaptec.com> References: <6100BCEB85F8E244959C756C04E0EDD161CB79@otcexc01.otc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 18, 2002 at 01:31:14AM -0500, Long, Scott wrote:
>
> What are you setting ccb->ccb_h.status to? Can you share the body of
> your action method, or at least the XPT_PATH_INQ portions?
case XPT_PATH_INQ:
{
/* get properties of the SIM driver and HBA */
struct ccb_pathinq *cpi = &ccb->cpi;
hpFCPortInfo_t fpi;
cpi->version_num = 1; /* all drivers use version 1 */
cpi->target_sprt = 0; /* initiator only */
cpi->hba_eng_cnt = 0;
cpi->bus_id = bus;
cpi->max_target = TACH_MAX_DISKS - 1;
cpi->max_lun = TACH_MAX_LUN - 1;
cpi->hba_misc = PIM_NOBUSRESET;
cpi->hba_inquiry = PI_TAG_ABLE;
cpi->initiator_id = cpi->max_target + 1;
fcPortGetInfo(&(ini->tach->root), &fpi);
if (fpi.PortSpeed == 0) {
cpi->base_transfer_speed = 100000;
} else {
cpi->base_transfer_speed = 200000;
}
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Agilent", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = unit;
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
--
Chuck Tuffli <chuck_tuffli AT NO_SPAM agilent DOT com>
Agilent Technologies, Storage and Networking
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021118064805.GA7533>