Date: Mon, 13 Nov 2023 21:22:23 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-arm@FreeBSD.org Subject: [Bug 275065] FreeBSD 14 images for armv7 doesn't boot on beaglebone black Message-ID: <bug-275065-7@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D275065 Bug ID: 275065 Summary: FreeBSD 14 images for armv7 doesn't boot on beaglebone black Product: Base System Version: 14.0-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: arm Assignee: freebsd-arm@FreeBSD.org Reporter: rodrigo@FreeBSD.org Hi, The FreeBSD 14 images (armv7 GENERIC RC2, RC3 or RC4) doesn't boot in a beaglebone black. See bellow the console output. At the end of the sequence, the board reset and restart the kernel loading. The 13.2 image looks fine. Loading kernel... /boot/kernel/kernel text=3D0x1b4 text=3D0x71ad54 text=3D0x196750 data=3D0xa= f3cc data=3D0x0+0x1e4000 0x4+0xa1ff0+0x4+0x112ee2- Loading configured modules... can't find '/boot/entropy' /boot/kernel/umodem.ko text=3D0x1540 text=3D0xea0 data=3D0x238 0x4+0xe50+0x= 4+0xa6c loading required module 'ucom' /boot/kernel/ucom.ko text=3D0x19f8 text=3D0x2d18 data=3D0x4cc+0x838 0x4+0x1480+0x4+0xbcf can't find '/etc/hostid' Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x87ee4000. Kernel entry at 0x97000200... Kernel args: (null) U-Boot SPL 2022.04-ge0d31da5 (Aug 04 2023 - 18:48:26 +0000) Trying to boot from MMC2 U-Boot 2022.04-ge0d31da5 (Aug 04 2023 - 18:48:26 +0000) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Reset Source: watchdog reset has occurred. Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. Core: 150 devices, 14 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** Unable to use mmc 0:1 for loading the env ** Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone Cape EEPROM: no EEPROM at address: 0x54 BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth2: ethernet@4a100000, eth3: usb_ether Press SPACE to abort autoboot in 0 seconds board_name=3D[A335BNLT] ... board_rev=3D[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Couldn't find partition 0:2 0x82000000 Can't set block device Couldn't find partition 0:2 0x82000000 Can't set block device switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 98558 bytes read in 10 ms (9.4 MiB/s) Scanning disk mmc@48060000.blk... Scanning disk mmc@481d8000.blk... Found 5 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image Found EFI removable media binary efi/boot/bootarm.efi 852268 bytes read in 58 ms (14 MiB/s) Booting /efi\boot\bootarm.efi Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/arm EFI loader, Revision 1.1 Command line arguments: l Image base: 0x9ce40000 EFI version: 2.90 EFI Firmware: Das U-Boot (rev 8226.1024) Console: efi,comconsole (0) Load Path: /efi\boot\bootarm.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,= 0x19000) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,= 0x19000) Setting currdev to disk0p1: Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x1980= 0,0x9e6800) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local / --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-275065-7>