From owner-freebsd-questions Tue Apr 9 20:46:12 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id UAA18440 for questions-outgoing; Tue, 9 Apr 1996 20:46:12 -0700 (PDT) Received: from riley-net170-164.uoregon.edu (riley-net170-164.uoregon.edu [128.223.170.164]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id UAA18432 for ; Tue, 9 Apr 1996 20:46:05 -0700 (PDT) Received: (from dwhite@localhost) by riley-net170-164.uoregon.edu (8.6.12/8.6.12) id VAA20968; Tue, 9 Apr 1996 21:28:20 -0700 Date: Tue, 9 Apr 1996 21:28:20 -0700 (PDT) From: Doug White Reply-To: dwhite@resnet.uoregon.edu To: "Ryan K. Kereliuk" cc: questions@freebsd.org Subject: Re: Hardware Queries (cdrom, ethernet) In-Reply-To: <199604092030.OAA00164@ve6rkk.ampr.ab.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Tue, 9 Apr 1996, Ryan K. Kereliuk wrote: > I popped in an ATAPI 6x CDROM but the driver isn't handling it > very well. The relevant kernel boot messages are: > > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): > wd0: 815MB (1669248 sectors), 1656 cyls, 16 heads, 63 S/T, 512 B/S > wdc0: unit 1 (atapi): , removable, intr, dma, iordis > atapi0.1: unknown phase > npx0 on motherboard > npx0: INT 16 interface > > I still have the option of returning this drive but would prefer > to get it working since it was so cheap. Looks like it's working to me. > Probing for devices on the PCI bus: > chip0 rev 2 on pci0:0 > chip1 rev 2 on pci0:7 > pci0:9: AMD, device=0x2000, class=network (ethernet) [no driver assigned] > vga0 rev 9 int a irq 11 on pci0:10 > > Any advice on getting my BOCA PCI network adapter working would > be helpful, too, though this is not as important. Configure the lnc0 driver for port address 0x2000. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major