From owner-freebsd-questions Fri Oct 6 16:22:12 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id QAA27059 for questions-outgoing; Fri, 6 Oct 1995 16:22:12 -0700 Received: from tasman.cc.utas.edu.au (cp_nairn@tasman.cc.utas.edu.au [131.217.10.1]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id QAA27052 for ; Fri, 6 Oct 1995 16:22:09 -0700 Received: (from cp_nairn@localhost) by tasman.cc.utas.edu.au (8.6.10/8.6.6) id KAA04183; Sat, 7 Oct 1995 10:22:05 +1100 Date: Sat, 7 Oct 1995 10:22:04 +1100 (DST) From: Carey Nairn To: FreeBSD Questions Subject: atapi.flp and 2.1.0-951005-SNAP Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org Precedence: bulk Hi, I downloaded the atapi.flp image for 2.1.0-951005-SNAP in hopes that I would be able to use my IDE CDROM with FreeBSD but to no avail. The floppy boots fine but fails to detect the second IDE controller (which is used to control the CDROM). I have a 100MHz Pentium (Triton chipset) with 2 IDE controllers on board. The first controller has my 2 hard disks connected to it and the second has only the CD. The CD works fine under DOS and when the driver is loaded for it the controller is detected at 170H, IRQ 15. When I boot FreeBSD I get wdc1 not found at 0x170 Any thoughts or suggestions would be appreciated. Thanks ========================================================================= Carey Nairn ! email : Carey.Nairn@its.utas.edu.au Networks and Communications ! phone : (002) 20 7419 Information Technology Services ! fax : (002) 20 7898 University of Tasmania. ! =========================================================================