Date: Thu, 14 Feb 2013 16:09:50 -0500 From: FF <fusionfoto@gmail.com> To: freebsd-questions@freebsd.org Subject: Is this an SSD problem or a controller problem? Message-ID: <CAD=tpefwdtbV8DrKFG_dk94OKxHxNGc5XcjA7aJ%2BrgqXama-bw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
This error has shown up at boot up, and then again trying to fire up
smartd.conf.
(aprobe0:ata2:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00
40 00 00 00 00 02 00
(aprobe0:ata2:0:0:0): CAM status: ATA Status Error
(aprobe0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 02 00
(aprobe0:ata2:0:0:0): Retrying command
(aprobe0:ata2:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00
40 00 00 00 00 02 00
(aprobe0:ata2:0:0:0): CAM status: ATA Status Error
(aprobe0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 02 00
(aprobe0:ata2:0:0:0): Error 5, Retries exhausted
The device is an SSD on ada15.
smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Indilinx Everest/Martini based SSDs
Device Model: OCZ-VERTEX4
Serial Number: OCZ-7T2T10Q1P4294S68
LU WWN Device Id: 5 e83a97 7039f0a47
Firmware Version: 1.5
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Feb 14 14:16:00 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
dmesg | grep ada15
ada15 at ata2 bus 0 scbus12 target 0 lun 0
ada15: <OCZ-VERTEX4 1.5> ATA-9 SATA 3.x device
ada15: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada15: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada15: Previously was known as ad28
smartctl -a /dev/ada15
smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Indilinx Everest/Martini based SSDs
Device Model: OCZ-VERTEX4
Serial Number: OCZ-7T2T10Q1P4294S68
LU WWN Device Id: 5 e83a97 7039f0a47
Firmware Version: 1.5
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Feb 14 16:09:21 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.
SMART Attributes Data Structure revision number: 18
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 006 000 000 Old_age
Offline - 6
3 Spin_Up_Time 0x0000 100 100 000 Old_age
Offline - 0
4 Start_Stop_Count 0x0000 100 100 000 Old_age
Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age
Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age
Offline - 3334
12 Power_Cycle_Count 0x0000 100 100 000 Old_age
Offline - 20
232 Lifetime_Writes 0x0000 100 100 000 Old_age
Offline - 19526904666
233 Media_Wearout_Indicator 0x0000 098 000 000 Old_age
Offline - 98
SMART Error Log not supported
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
This system doesn't seem to have any issue reading/writing to the SSD even
with fairly significant ZFS loads. Any suggestions to track this down would
be appreciated!
--
FF
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAD=tpefwdtbV8DrKFG_dk94OKxHxNGc5XcjA7aJ%2BrgqXama-bw>