Date: Tue, 16 Sep 2008 09:21:16 -0700 From: Chris St Denis <chris@smartt.com> To: Gian Paolo Buono <gpbuono@gmail.com> Cc: freebsd-questions@freebsd.org, Ivan Voras <ivoras@freebsd.org> Subject: Re: x3550 ServeRAID-8k and FBSD 7, group limit Message-ID: <48CFDCFC.6060405@smartt.com> In-Reply-To: <c60a46e50809160154o6c15e1a0g748637fcc0945ec2@mail.gmail.com> References: <692c9a9f0809121334i21e9861bu9ecf6e890680636f@mail.gmail.com> <gaitl1$kh3$1@ger.gmane.org> <48CEC0A1.5040201@smartt.com> <c60a46e50809160154o6c15e1a0g748637fcc0945ec2@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It does exit....eventually. It just takes a ridiculously long time. That is Fixed in 7-STABLE so should be fine in 7.1 as well. Gian Paolo Buono wrote: > Hi, > I have a problem when run > /usr/local/sbin/arcconf GETCONFIG 1 LD > > Controllers found: 1 > ---------------------------------------------------------------------- > Logical device information > ---------------------------------------------------------------------- > Logical device number 0 > Logical device name : Drive 1 > RAID level : 1 > Status of logical device : Optimal > Size : 69890 MB > Write-cache mode : Not supported > Partitioned : Yes > Protected by Hot-Spare : No > Bootable : Yes > Failed stripes : No > -------------------------------------------------------- > Logical device segment information > -------------------------------------------------------- > Segment 0 : Present (0,0) > Segment 1 : Present (0,1) > > > > Command completed successfully. > > ^C > > the output of command is correct but don't exit and I must press control^C. > I want exit without press control^C, have you suggestions to resolve this > problem ? > > Bye Gian Paolo > > > > > On Mon, Sep 15, 2008 at 10:08 PM, Chris St Denis <chris@smartt.com> wrote: > > >> Ivan Voras wrote: >> >> >>> Yury Michurin wrote: >>> >>> >>> >>>> We are currently considering to purchase IBM x3550 with ServeRAID-8k, in >>>> order to run FreeBSD 7 with RAID5, >>>> but it is very unclear from what I've saw on the Internet, whether the >>>> driver support on FreeBSD is stable enough for production use, >>>> >>>> >>>> >>> I've never had problems with it, and I didn't heard of any serious >>> problems others had. >>> >>> >>> >> aac driver doesn't seem to notice if a drive fails. You'll want to keep an >> eye on with it arcconf run via crontab or something as a workaround. I use >> >> /usr/local/sbin/arcconf GETCONFIG 1 LD | egrep '(name|Status)' >> >> Seems to work fine with FreeBSD other than that. Only other issue I've had >> with it, is it takes about 4 minutes to load it's bios in post. >> >> >>> >>>> and I've left with many questions unanswered, with which I hope you'll be >>>> kind to help me =) >>>> >>>> >>>> 1. Is FreeBSD supports the device right after install or I need to >>>> recompile >>>> the kernel? >>>> >>>> >>>> >>> It's available by default. This is the aac driver: >>> http://www.freebsd.org/cgi/man.cgi?aac >>> >>> >>> >>> >>>> 2. Is tools for manage the RAID available? If no, how you rebuild the >>>> array >>>> on drive failure (and how to detect it)? >>>> >>>> >>>> >>> You can use the aaccli management tool : >>> http://www.freshports.org/sysutils/aaccli/ >>> >>> >>> >> aacli doesn't work with ServeRAID-8k. But sysutils/arcconf does. I think >> it's read only tho. >> >> >>> >>>> I've just remember i had another unanswered question, not related to >>>> x3550: >>>> 3. When I've used FreeBSD 6.2, it had a limitation, that a user can be >>>> member only of N groups (don't remember exactly, i think N = 15), >>>> however i couldn't find any official documentation of that issue, nor if >>>> it >>>> still exists in FBSD 7, so is it? =) >>>> >>>> >>>> >>> It still exists and AFAIK it won't be changed soon because of the need >>> to support NFS. You could try raising the issue again on the current@list. >>> >>> >>> >>> >>> >> -- >> Chris St Denis >> Programmer >> SmarttNet (www.smartt.com) >> Ph: 604-473-9700 Ext. 200 >> ------------------------------------------- >> "Smart Internet Solutions For Businesses" >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to " >> freebsd-questions-unsubscribe@freebsd.org" >> >> > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48CFDCFC.6060405>