Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 18 Jan 2003 00:14:39 +0300
From:      Alex Povolotsky <tarkhil@webmail.sub.ru>
To:        freebsd-hardware@freebsd.org
Subject:   CF reading?
Message-ID:  <20030118001439.3010dd72.tarkhil@webmail.sub.ru>

next in thread | raw e-mail | index | archive | help
Hello!

I've tried to connect my new CoolPix 4500 to FreeBSD 4.4 (yes, I know it's old. If that issue has been fixed, I'll upgrade tomorrow), via USB.

Here's what I've got:

Jan 17 18:36:12 shuttle /kernel: umass0: NIKON Nikon Digital Camera E4500, rev 1
.10/1.00, addr 2
Jan 17 18:36:12 shuttle /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Jan 17 18:36:12 shuttle /kernel: da0: <NIKON NIKON DSC E4500 1.00> Removable Dir
ect Access SCSI-2 device 
Jan 17 18:36:12 shuttle /kernel: da0: 650KB/s transfers
Jan 17 18:36:12 shuttle /kernel: da0: 15MB (31360 512 byte sectors: 64H 32S/T 15
C)

seems bright, yes?

Any attempt to read da0 results in

Jan 17 18:36:25 shuttle /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 
1 0 
Jan 17 18:36:25 shuttle /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,
0
Jan 17 18:36:25 shuttle /kernel: (da0:umass-sim0:0:0:0): Invalid command operati
on code
Jan 17 18:36:25 shuttle /kernel: da0: reading primary partition table: error rea
ding fsbn 0

Here's my dmesg about usb:

Jan 16 21:49:03 shuttle /kernel: usb0: <VIA 83C572 USB controller> on uhci0
Jan 16 21:49:03 shuttle /kernel: usb0: USB revision 1.0
Jan 16 21:49:03 shuttle /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1
.00, addr 1
Jan 16 21:49:03 shuttle /kernel: uhub0: 2 ports with 2 removable, self powered

It works well on Win98, so I cannot blame hardware.

Reading mans on usb/usbd didn't lit anything.

-- 
Alex.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030118001439.3010dd72.tarkhil>