Date: Mon, 2 Jul 2001 10:28:44 -0500 From: "Lavender, Ben" <LavenderB@nctldno.navy.mil> To: 'Terry Zink' <tzink@metrocon.com> Cc: "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: RE: interface aliases and routing Message-ID: <78202F9B9BB8D311846100805F577DFF274094@nctams01.nctldno.navy.mil>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1030B.B23AE5D4 Content-Type: text/plain; charset="iso-8859-1" Like this? xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::210:5aff:fe28:ca1f%xl0 prefixlen 64 scopeid 0x1 inet 164.229.1.72 netmask 0xffffffc0 broadcast 164.229.1.127 inet 164.229.1.74 netmask 0xffffffff broadcast 164.229.1.74 ether 00:10:5a:28:ca:1f media: autoselect (100baseTX <full-duplex>) status: active supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> This didn't work. Thanks for the response, ben ps--sorry about the html email originally. > -----Original Message----- > From: Terry Zink [mailto:tzink@metrocon.com] > Sent: Monday, July 02, 2001 10:12 AM > To: Lavender, Ben > Cc: freebsd-questions@freebsd.org > Subject: Re: interface aliases and routing > > > Hrm. I believe if I;m not mistaken, that aliases on the nic > need to have a > netmask of 255.255.255.255 .. At least, that is what I need > to do. Might > wish to try that. > > > On Monday 02 July 2001 10:42, you wrote: > > I have a FreeBSD 4.2 box currently running. Im trying to > get interface > > aliases to work properly without much success. > > > > While I seemingly get the interface configured properly, I can't > > communicate with different subnets. The interface and the > alias can both > > communicate with other machines on the same subnet, but > only the 'primary' > > address (in this case, 1.72) will talk with other subnets. > > > > any ideas/information required? > > > > ifconfig: > > xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet6 fe80::210:5aff:fe28:ca1f%xl0 prefixlen 64 scopeid 0x1 > > inet 164.229.1.72 netmask 0xffffffc0 broadcast 164.229.1.127 > > inet 164.229.1.74 netmask 0xffffffc0 broadcast 164.229.1.127 > > ether 00:10:5a:28:ca:1f > > media: autoselect (100baseTX <full-duplex>) status: active > > supported media: autoselect 100baseTX <full-duplex> 100baseTX > > 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > faith0: flags=8000<MULTICAST> mtu 1500 > > gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > > gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > > gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > > gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 > > inet6 ::1 prefixlen 128 > > inet 127.0.0.1 netmask 0xff000000 > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > > > > > > > Ben Lavender > > System Administrator, Newsouth Communications > > NCTAMS LANT DET NOLA > > ---------------------------------------- > Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1" > Content-Transfer-Encoding: quoted-printable > Content-Description: > ---------------------------------------- > > -- > Regards, > > Terry Zink > System Administrator > Metrocon Communications > Phone: (212) 661-6800 x 1553 > ------_=_NextPart_001_01C1030B.B23AE5D4 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 5.5.2232.0"> <TITLE>RE: interface aliases and routing</TITLE> </HEAD> <BODY> <P><FONT SIZE=3D2>Like this?</FONT> <BR><FONT SIZE=3D2>xl0: = flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu = 1500</FONT> <BR> <FONT SIZE=3D2>inet6 = fe80::210:5aff:fe28:ca1f%xl0 prefixlen 64 scopeid 0x1 </FONT> <BR> <FONT SIZE=3D2>inet = 164.229.1.72 netmask 0xffffffc0 broadcast 164.229.1.127</FONT> <BR> <FONT SIZE=3D2>inet = 164.229.1.74 netmask 0xffffffff broadcast 164.229.1.74</FONT> <BR> <FONT SIZE=3D2>ether = 00:10:5a:28:ca:1f </FONT> <BR> <FONT SIZE=3D2>media: = autoselect (100baseTX <full-duplex>) status: active</FONT> <BR> <FONT SIZE=3D2>supported = media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP = <full-duplex> 10baseT/UTP 100baseTX = <hw-loopback></FONT></P> <P><FONT SIZE=3D2>This didn't work.</FONT> </P> <P><FONT SIZE=3D2>Thanks for the response,</FONT> <BR><FONT SIZE=3D2>ben</FONT> </P> <P><FONT SIZE=3D2>ps--sorry about the html email originally.</FONT> </P> <BR> <P><FONT SIZE=3D2>> -----Original Message-----</FONT> <BR><FONT SIZE=3D2>> From: Terry Zink [<A = HREF=3D"mailto:tzink@metrocon.com">mailto:tzink@metrocon.com</A>]</FONT>= <BR><FONT SIZE=3D2>> Sent: Monday, July 02, 2001 10:12 AM</FONT> <BR><FONT SIZE=3D2>> To: Lavender, Ben</FONT> <BR><FONT SIZE=3D2>> Cc: freebsd-questions@freebsd.org</FONT> <BR><FONT SIZE=3D2>> Subject: Re: interface aliases and = routing</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Hrm. I believe if I;m not mistaken, that = aliases on the nic </FONT> <BR><FONT SIZE=3D2>> need to have a </FONT> <BR><FONT SIZE=3D2>> netmask of 255.255.255.255 .. At least, that is = what I need </FONT> <BR><FONT SIZE=3D2>> to do. Might </FONT> <BR><FONT SIZE=3D2>> wish to try that. </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> On Monday 02 July 2001 10:42, you wrote:</FONT> <BR><FONT SIZE=3D2>> > I have a FreeBSD 4.2 box currently = running. Im trying to </FONT> <BR><FONT SIZE=3D2>> get interface</FONT> <BR><FONT SIZE=3D2>> > aliases to work properly without much = success.</FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> > While I seemingly get the interface = configured properly, I can't</FONT> <BR><FONT SIZE=3D2>> > communicate with different subnets. = The interface and the </FONT> <BR><FONT SIZE=3D2>> alias can both</FONT> <BR><FONT SIZE=3D2>> > communicate with other machines on the = same subnet, but </FONT> <BR><FONT SIZE=3D2>> only the 'primary'</FONT> <BR><FONT SIZE=3D2>> > address (in this case, 1.72) will talk = with other subnets.</FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> > any ideas/information required?</FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> > ifconfig:</FONT> <BR><FONT SIZE=3D2>> > xl0: = flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu = 1500</FONT> <BR><FONT SIZE=3D2>> > inet6 = fe80::210:5aff:fe28:ca1f%xl0 prefixlen 64 scopeid 0x1</FONT> <BR><FONT SIZE=3D2>> > inet 164.229.1.72 = netmask 0xffffffc0 broadcast 164.229.1.127</FONT> <BR><FONT SIZE=3D2>> > inet 164.229.1.74 = netmask 0xffffffc0 broadcast 164.229.1.127</FONT> <BR><FONT SIZE=3D2>> > ether 00:10:5a:28:ca:1f<= /FONT> <BR><FONT SIZE=3D2>> > media: autoselect = (100baseTX <full-duplex>) status: active</FONT> <BR><FONT SIZE=3D2>> > supported media: = autoselect 100baseTX <full-duplex> 100baseTX</FONT> <BR><FONT SIZE=3D2>> > 10baseT/UTP <full-duplex> = 10baseT/UTP 100baseTX <hw-loopback></FONT> <BR><FONT SIZE=3D2>> > lp0: = flags=3D8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500</FONT> <BR><FONT SIZE=3D2>> > faith0: flags=3D8000<MULTICAST> mtu = 1500</FONT> <BR><FONT SIZE=3D2>> > gif0: = flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280</FONT> <BR><FONT SIZE=3D2>> > gif1: = flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280</FONT> <BR><FONT SIZE=3D2>> > gif2: = flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280</FONT> <BR><FONT SIZE=3D2>> > gif3: = flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280</FONT> <BR><FONT SIZE=3D2>> > lo0: = flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384</FONT> <BR><FONT SIZE=3D2>> > inet6 fe80::1%lo0 = prefixlen 64 scopeid 0x8</FONT> <BR><FONT SIZE=3D2>> > inet6 ::1 prefixlen = 128</FONT> <BR><FONT SIZE=3D2>> > inet 127.0.0.1 netmask = 0xff000000</FONT> <BR><FONT SIZE=3D2>> > ppp0: = flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500</FONT> <BR><FONT SIZE=3D2>> > sl0: = flags=3Dc010<POINTOPOINT,LINK2,MULTICAST> mtu 552</FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> ></FONT> <BR><FONT SIZE=3D2>> > Ben Lavender</FONT> <BR><FONT SIZE=3D2>> > System Administrator, Newsouth = Communications</FONT> <BR><FONT SIZE=3D2>> > NCTAMS LANT DET NOLA</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> ----------------------------------------</FONT> <BR><FONT SIZE=3D2>> Content-Type: text/html; = charset=3D"iso-8859-1"; name=3D"Attachment: = 1"</FONT> <BR><FONT SIZE=3D2>> Content-Transfer-Encoding: = quoted-printable</FONT> <BR><FONT SIZE=3D2>> Content-Description: </FONT> <BR><FONT SIZE=3D2>> ----------------------------------------</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> -- </FONT> <BR><FONT SIZE=3D2>> Regards,</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Terry Zink</FONT> <BR><FONT SIZE=3D2>> System Administrator</FONT> <BR><FONT SIZE=3D2>> Metrocon Communications</FONT> <BR><FONT SIZE=3D2>> Phone: (212) 661-6800 x 1553</FONT> <BR><FONT SIZE=3D2>> </FONT> </P> </BODY> </HTML> ------_=_NextPart_001_01C1030B.B23AE5D4-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?78202F9B9BB8D311846100805F577DFF274094>