Date: Thu, 16 Sep 1999 17:50:10 -0400 From: Peter Radcliffe <pir@pir.net> To: freebsd-mobile@FreeBSD.ORG Subject: Re: further question on the sony viao Message-ID: <19990916175010.M13593@pir.net> In-Reply-To: <Pine.GSO.3.96.990916170500.24935D-100000@interport.net>; from lord henry on Thu, Sep 16, 1999 at 05:27:31PM -0400 References: <19990812103622.A4343@netmonger.net> <Pine.GSO.3.96.990916170500.24935D-100000@interport.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm using my 5050TR right now ... lord henry <zeno@interport.net> probably said: > i'm actually suprised at the compatability i've experienced thus far; that > the built-in modem was NOT a win modem, and showed up under /dev/cuaa1, > absolutely SHOCKED me. and I've gotten good 48k+ connections with it, too. > luigi's drivers, on the other hand, id the sound card thus: > > pcm0 at 0x220 on isa > ESS1868 (rev 11) > > though that like like compatability, any attempts to play sound to the > sound card cause serious difficulties -- in fact, the kernel panicked once > already. pcm0 at 0x220 irq 5 drq 1 on isa ESS1879 (rev 11, native mode) I specify the irq and drq with 3.2-R+PAO and it works fine. The TR and the TX are supposedly identical apart from the battery, but those version numbers are different :/ > is this a problem w/ 3.3, or w/ the USB support in general? I've not had any luck getting the USB working but I havn't tried too hard. > if anyone else is toying w/ one of these, i'd also like to point out that > the PSM_HOOKAPM and PSM_RESETAFTERSUSPEND options are a GOOD idea if you > plan on using the touchpad after suspending ;) and you can suspend (to memory or disk) and swap to an external mouse and back. > pcmcia support seems a tad flaky, though i suspect this might have > something to do w/ my choice of versions (3.3 seems to have issues in this > realm -- though it's all ok as long as i don't attempt a hot-swap). with 3.2+PAO I'm not seeing any real flakyness. Occasionally I have to remove my ether card and put it back after suspending without a card in and putting the card in while it is suspended. options PCIC_RESUME_RESET # reset after resume seems to help. as soon as 3.3 PAO is out, I'll be playing with that. P. -- pir pir@pir.net pir@shore.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990916175010.M13593>