From owner-freebsd-current Wed Mar 3 13:32:40 1999 Delivered-To: freebsd-current@freebsd.org Received: from ix.netcom.com (sil-wa15-54.ix.netcom.com [207.93.148.54]) by hub.freebsd.org (Postfix) with ESMTP id 3C571150AC for ; Wed, 3 Mar 1999 13:32:11 -0800 (PST) (envelope-from tomdean@ix.netcom.com) Received: (from tomdean@localhost) by ix.netcom.com (8.9.3/8.8.8) id NAA00386; Wed, 3 Mar 1999 13:31:22 -0800 (PST) (envelope-from tomdean) Date: Wed, 3 Mar 1999 13:31:22 -0800 (PST) Message-Id: <199903032131.NAA00386@ix.netcom.com> From: Thomas Dean To: chuckr@mat.net Cc: geoffr@is.co.za, bright@cygnus.rush.net, current@FreeBSD.ORG In-reply-to: (message from Chuck Robey on Wed, 3 Mar 1999 12:58:41 -0500 (EST)) Subject: Re: Printing is vvveeerrryyy slow Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Just to be clear, when I said the values from dmesg and config covered everything, I mean all the physical and/or BIOS devices are included in the list. There are TWO cards plugged into the MB, other than the CPU's. These are de0 and the vga. The on-mother-board devices are all in dmesg. There are no irq's in BIOS, other than some of those in dmesg, parallel, serial, and, PS/2. There are no other devices. tomdean === all of dmesg ================================================ Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #4: Mon Feb 15 03:34:29 PST 1999 tomdean@celebris:/usr/src/sys/compile/CELEBRIS-SMP Timecounter-tdd "i8254" frequency 1193026 Hz cost 2540 ns CPU: Pentium/P54C (586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x3bf real memory = 100663296 (98304K bytes) avail memory = 95055872 (92828K bytes) Programming 16 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xf02b0000. Probing for devices on PCI bus 0: chip0: \ rev 0x11 on pci0.0.0 ncr0: rev 0x02 int a irq 11 on pci0.1.0 chip1: rev 0x88 on pci0.2.0 vga0: rev 0x01 int a irq 9 on pci0.6.0 de0: rev 0x11 int a irq 10 on pci0.8.0 de0: DEC DE450-CA 21041 [10Mb/s] pass 1.1 de0: address 00:00:f8:02:76:db Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A ppc0 at 0x378 irq 7 on isa ppc0: PC87334 chipset (PS2/NIBBLE) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 de0 XXX: driver didn't set ifq_maxlen lo0 XXX: driver didn't set ifq_maxlen Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at ncr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.0MB/s transfers (10.0MHz, offset 8) da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C) da2 at ncr0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 10.0MB/s transfers (10.0MHz, offset 8), Tagged Queueing Enabled da2: 1029MB (2109376 512 byte sectors: 255H 63S/T 131C) da1 at ncr0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 10.0MB/s transfers (10.0MHz, offset 8), Tagged Queueing Enabled da1: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C) changing root device to da1s1a cd0 at ncr0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present (da1:ncr0:0:1:0): tagged openings now 8 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message